Author Topic: show off your tender/encore (Read 3538 times)

Scibaer · « **on:** September 16, 2009, 04:48:08 AM »

if there is not a show off your contender/G2/encore thread lets get one started.

Scibaer · « **Reply #1 on:** September 16, 2009, 05:08:42 AM »

since i brought it up, i'll start..
here is my 1979 contender, awaiting its new barrel.
i drilled out the screw hole and grip, replaced the screw with a sling stud.
i cut the factory forend down for the 30-30 barrel that i had, but other then that its factory stock.

Scibaer · « **Reply #2 on:** September 18, 2009, 09:46:50 AM »

here is a pic of my 'tender with the new 44mag barrel i traded for ( thanks doug and paul ).
its finally all together and ready to see the range this weekend.

Slowpoke Slim · « **Reply #3 on:** September 18, 2009, 03:10:19 PM »

Heck I think they're all in there now...

Some of them don't have scopes on them in this pic, but do now...

doc-and · « **Reply #4 on:** September 18, 2009, 11:38:32 PM »

Here's one of mine, Custom Shop Color Case Harden G2, factory 45Colt barrel with beautiful custom wood by Otter

Currently working at putting together a 223 Carbine, hope to have it complete by Christmas (for myself

)

docand

David D. · « **Reply #5 on:** September 19, 2009, 02:56:10 AM »

Encore 16-1/4" FRO 22 Hornet

Encore 16" OTT 257X225IMP

Encore 14" Factory 22-250Rem.

Encore 15" FRO 6.5X55 S.M.

Encore 16" MGM 6.5X284Win.

Encore 26" MGM 6MM/TCU

Encore 26" tapered FRO 280Rem.

Contender 14" factory 17Mach2

Contender G2 13" OTT full 1" Step-Up 6.5TCU

Contender 14" factory 22L.R.

Contender G2 14" SSK 6.5JDJ

Contender G2 14" MGM 357Max.

Contender G2 14" MGM 223IMP.

Contender 13" MGM 30-30IMP.

Contender 20" OTT 6.5x225IMP.

Contender 17" tapered FRO 17Mach2

22popnsplat · « **Reply #6 on:** September 19, 2009, 05:46:54 AM »

Here is one of mine

willys.450 · « **Reply #7 on:** September 21, 2009, 02:26:48 AM »

After TC DAVE I kinda feel a little inadequate... Well, heres mine. After selling all the ones I don't play with anymore this is what I have left. The one on top is a rechambered factory 45-70 in 450 marlin with a Vais brake. The one on bottom is factory 25-06 with a Vais brake. Those Vais brakes make a huge difference in both recoil and noise. The wood is custom made by me and it is my first ever time working with gun wood.

Geoff

skb2706 · « **Reply #8 on:** September 21, 2009, 04:04:45 AM »

.204 Ruger carbine on an AA Contender frame. Leupold VXII 4x12 AO scope. Prairie dog killin machine

my sons G2 in 7-30 Waters with a Burris 3x9 FFII

GRIMJIM · « **Reply #9 on:** September 21, 2009, 09:53:53 AM »

Quote from: doc-and on September 18, 2009, 11:38:32 PM

Here's one of mine, Custom Shop Color Case Harden G2, factory 45Colt barrel with beautiful custom wood by Otter

Currently working at putting together a 223 Carbine, hope to have it complete by Christmas (for myself )

docand

That's some beautiful wood.

I only have 2 so far.

My 30-30 contender

And my Encore 209x50

ftw · « **Reply #10 on:** September 21, 2009, 02:35:15 PM »

man, Dave is a hard act to follow

.

7-30 Waters

Slowpoke Slim · « **Reply #11 on:** September 28, 2009, 04:55:20 PM »

Ok, I admit it, I'm shameless,

Here's my latest addition. New wood, old barrel and frame. The wood is from another site, Georgia Jim wood. My old 22 hornet barrel and frame...

GameHauler · « **Reply #12 on:** October 03, 2009, 12:38:28 PM »

No one that I know of could come close to Dave.
I would love to see his safe
OR SHOULD I SAY VAULT

I'll get a few of mine up soon.
Nice stuff guys.

Mike

bagdadjoe · « **Reply #13 on:** October 04, 2009, 03:24:45 AM »

Drool......No wonder it's so hard to find a beauty-ful Encore...Dave has drained the market dry! Gives me something to shoot for (pun intended)...the 6.5x284 groups are lucious as well...
thanks for the photos.

kynardsj · « **Reply #14 on:** October 04, 2009, 03:51:56 AM »

Makes me too shy to post pics of my two octagon barreled Contenders. Pardon me while I wipe the drool off my keyboard and desk. Just a bunch of fine looking Tenders !!

GameHauler · « **Reply #15 on:** October 04, 2009, 10:52:31 AM »

First is my main hunter;
7-30 Waters with Georgia Jim wood

Then if I want to reach out there a bit further;
24" 7-30 Waters

My latest addition with the same furniture for Bear;
375 JDJ

Most of the family all together;

Special Ed · « **Reply #16 on:** October 07, 2009, 05:08:59 AM »

Here's mine...
14" TC custom shop 22 mag w/2X Leupold
14" 223 w/4x Leupold
10" 45/410

also have 3 more barrels, (2) 22lr & 14" 44 mag.

Ed

MePlat · « **Reply #17 on:** October 07, 2009, 08:02:12 AM »

Here is one in action:
http://www.youtube.com/watch?v=Gh0LbVEdkIo

Good little gun for plinking and fun.

gahunter29 · « **Reply #18 on:** October 08, 2009, 03:56:01 AM »

That Dave has some REAL hardware. WOW.
Here are my 2 Encores
The Purple one is a .308
The Red one is in .22-250 (It is for sale in Encore Classifieds if you are interested )

The Purple stock is by High Plains Gunstocks -- Fabulous work and handgrip is Sweet
The Red stock is by Ole GA Jim -- Again Fabulous work and the handgrip is Sweet , too.

Ole GA Jim must have retired because I can't find his website on the internet anymore...

stubshaft · « **Reply #19 on:** October 11, 2009, 04:07:05 PM »

Encorre 300 Whisper with T/C Custom Shop barrel and Georgia Jim wood.

Nashcat · « **Reply #20 on:** October 12, 2009, 03:47:40 PM »

Stainless Contender with SSK, 300 Savage barrel and 2-6 Bushnell scope.

Two Bears · « **Reply #21 on:** October 13, 2009, 10:22:08 PM »

You know, some of you need some help !

You make me feel like such a loser because I only have 2 Encores.

Plinker · « **Reply #22 on:** October 16, 2009, 01:03:54 AM »

Here's my latest- .223Rem with Burris 3X12 in burris rings.

gunoil · « **Reply #23 on:** October 17, 2009, 06:37:52 AM »

the top one is a 209 50 ML bottom is a 44mag thanks WORM