« previous next »
Pages: [1]   Go Down

Author Topic: finished 12ga smooth bore  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

Offline RED132

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
  • Gender: Male
finished 12ga smooth bore
« on: September 20, 2009, 07:02:35 AM »
Thank you all i have learned alot from you guys. I took a 12ga. 28" mod. and put the front sight off of my tc omega over the existing bead and the peep came off of a tc encore paint is krylon ultra-flat recoil pad is a limb-saver slip on. now i can shoot shot buck shot and slugs in the same gun. I took it out a while back and it patterned well with win. #6 shot ,shoots 00buck real nice and brenneke black magic short magnums 3 shots in 3 to 4 inches at fifty yards. I think i will try some remington sluggers and winchester rifled slugs next. Thanks again for your help Jeff
Logged

Offline BUGEYE

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 10268
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #1 on: September 21, 2009, 05:10:17 AM »
How did you attach that peep?
Logged
Give me liberty, or give me death
                                     Patrick Henry

Give me liberty, or give me death
                                     bugeye

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #2 on: September 21, 2009, 05:35:36 PM »
+1 how did you attach the peep? That's definitely a cool looking multi purpose shot gun.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline RED132

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #3 on: September 25, 2009, 11:25:17 AM »
Sorry so slow to respond work out of town only home on weekends. I removed the blueing and roughed up the chamber area with a dremill tool found some 3500 lb epoxy and a c-clamp. so far so good i have fired about 30 rounds out of it and it is holding fine. the front site i drilled a hole in the bottom of it so it would fit over the bead and epoxied it on. hope this helps Jeff
Logged

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #4 on: September 25, 2009, 12:02:39 PM »
 Let us know how the rem sluggers shoot. I've got an SB2 frame sitting around, been thinking of doing something similar with a 22" 20ga modified barrel and i've got a set of fiber optic sites of a muzzle loader that i scoped.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline RED132

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #5 on: September 25, 2009, 01:19:26 PM »
Maybe next weekend supposed to rain all weekend and half of next week. I will keep targets this time and take some pictures. Went to wally and the guy told me someone had just bought all the 15packs of sluggers he had so i will check him this weekend see if more came in.
Logged

Offline RED132

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #6 on: September 27, 2009, 06:54:25 AM »
 Just thought i would let you know that if you epoxy the sites on your shotgun they might be on there for good. I was wondering if they would stay on so i put the channel locks on them and could not get them off. so make sure they are straight and the ones you want because my would not budge. I used a two part epoxy the package said was 3500lb bonding force.
Logged

Offline Walley

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
  • Gender: Male
Re: finished 12ga smooth bore
« Reply #7 on: September 27, 2009, 08:06:51 AM »
I mounted a set of TrugloŽ Slug Series Shotgun Sights for a Remington on a gun like yours with epoxy two years ago. Use a slip on recoil pad. Sighted in to hold a three-inch group at 75 yards with sluggers. Filled out both years with it. I will be doing the same thing with a twenty gauge in the near future
Logged
Pages: [1]   Go Up
« previous next »