« previous next »
Pages: [1]   Go Down

Author Topic: Interesting barrelswitch issues with my 308 & 45-70  (Read 479 times)

0 Members and 1 Guest are viewing this topic.

Offline 1NEFsofar

  • Trade Count: (15)
  • Avid Poster
  • **
  • Posts: 215
Interesting barrelswitch issues with my 308 & 45-70
« on: October 24, 2009, 10:57:50 AM »
Went to the range today and confirmed what had happened before. When I change the barrel from my 45-70 to my 308 it hits within 1" of  the previous zero. Of course it could be low, high, right or left but consistantly 1".   When I change back to the 45-70...all bets are off are off as to where I hit.  It's on paper but that's about it.  Usually 4-6" in any direction.  When I switch back again to the 308, I'll be about 1" off. 

Nothing more than an interesting observation. 8)
Logged
If you can't be a good example, then you'll just have to serve as a horrible warning.  

The early bird may get the worm, but the second mouse gets the cheese!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Interesting barrelswitch issues with my 308 & 45-70
« Reply #1 on: October 24, 2009, 03:10:34 PM »
Same forend on both barrels? How do you control forend screw torque?

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 1NEFsofar

  • Trade Count: (15)
  • Avid Poster
  • **
  • Posts: 215
Re: Interesting barrelswitch issues with my 308 & 45-70
« Reply #2 on: October 25, 2009, 03:03:25 AM »
Different, dedicated forearms.  Set screws to control screw torque.
Logged
If you can't be a good example, then you'll just have to serve as a horrible warning.  

The early bird may get the worm, but the second mouse gets the cheese!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Interesting barrelswitch issues with my 308 & 45-70
« Reply #3 on: October 25, 2009, 05:26:15 AM »
Open and close the action several times after you swap the barrels, see if that gets everything back to normal.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »