Author Topic: Barrel marking  (Read 1152 times)

0 Members and 2 Guests are viewing this topic.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Barrel marking
« on: October 25, 2009, 06:31:51 PM »
What is the marking protocol for cannons-US, British, German, etc?

Offline cannonmn

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3345
Re: Barrel marking
« Reply #1 on: October 25, 2009, 07:55:12 PM »
Quote
What is the marking protocol for cannons-US, British, German, etc?

The answer to that could go on for longer than you want to read, but I think a reasonable length response could be provided if you were to specify "as of" a certain date, since it changed over time...

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Barrel marking
« Reply #2 on: October 25, 2009, 10:01:06 PM »
at least the earlier north european bronze guns just had the standard weight markings
and "me fecit XXXXXXXXX anno ????"
trunnion markings from late 1700 in most cases
muzzle face markings I have never seen on a bronze gun
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Barrel marking
« Reply #3 on: October 26, 2009, 02:10:45 AM »
What markings were placed where Dan.

I think a listing would be help John, in marking the guns we build,

I marked my Cairo gun.

Rt Trunnion Foundry/Maker, left trunnion year, Muzzle gun number, Cascable ring gun weight.

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Barrel marking
« Reply #4 on: October 26, 2009, 02:56:33 AM »
here you got two very good samples of different locations and different ways to do it
one is stamped after the casting and the other have rised letters direct in the casting
there are also an slightly variation of the placement
here in the breach end of the cannon its almost always just the founders name and where it was cast
sometimes the year is there also if its not in any other location on the cannon

sometimes it say : me fecit + the name of the founder, but sometimes the name of the founder is placed first and me fecit after the name . I dont know why they have different ways to write it

the year are almost always between "me fecit" and location, sometimes writen as 2009 and sometimes as MMIX
he he he , hope that was correct
sometimes they use the word anno before the year and sometimes not
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Barrel marking
« Reply #5 on: October 26, 2009, 03:31:51 AM »
here you got a typical placement for the manufacturing year on swedish military cannons
at the bottom you can see some exceptional markings on a very beautiful cannon
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline irishman

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 442
    • Brooks-USA
Re: Barrel marking
« Reply #6 on: October 28, 2009, 02:37:54 PM »
What is the marking protocol for cannons-US, British, German, etc?

I have just completed a SAMCC barrel and would like to mark it...Maybe BROOKS-USA SAMCC No.1 on the muzzel. I don't know what the etiquette is.

Can anyone steer me?

                          Michael

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Barrel marking
« Reply #7 on: October 28, 2009, 03:31:16 PM »
Pick one that you like.
Pick the vintage or national style that is cool or impressive.
I like George's use of Latin.
Mine are just serial numbered, but someday I'll make a punch with a symbol - Pulaski Coehorn Works.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Barrel marking
« Reply #8 on: October 28, 2009, 06:58:02 PM »
I undertand that is the state motto of Virginia.

SIC SEMPER TYRANNIS
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill