Author Topic: New SAMCC barrel (Read 44349 times)

irishman · « **on:** October 30, 2009, 02:45:18 PM »

This is our first SAMCC off, soon to head west, to the No. 01 owner. The second is in process and is almost complete. This barrel will be offered to GBO members, as a Christmas Special. Details to be announced.
Michael

RocklockI · « **Reply #1 on:** October 30, 2009, 03:01:11 PM »

WOW THAT IS NICE !!!!! that is very very nice !

Ex 49'er · « **Reply #2 on:** October 30, 2009, 06:36:17 PM »

What are the measurements, weight, and caliber?

Very nice looking barrel!!!!!!!!

GGaskill · « **Reply #3 on:** October 30, 2009, 07:41:14 PM »

See this thread and this post for plans.

gulfcoastblackpowder · « **Reply #4 on:** October 30, 2009, 07:48:58 PM »

Oooh! Shiney!!!

Very nice looking barrel. I usually shoot larger ones, but I'd imagine it would sing pretty well when it's fired!

Double D · « **Reply #5 on:** October 31, 2009, 02:40:00 AM »

Thanks, Irishman Brooks USA for bringing this to life.

And again thanks to George for laboring through my "drawings" to produce something workable for Irishman to work with!!

Double D · « **Reply #6 on:** November 02, 2009, 05:01:13 AM »

Here is a picture of the original gun.

This gun was brought from Germany by one of the founders of the South African Miniature Cannon Club in Durban South Africa founded in the late 1960's. The gun was fired on a regular basis 30 years and was semi retired in the mid 90's. It is now only fired by guests and visitors to the SAMCC.

Thanks again to Brooks USA for producing this gun!

Double D · « **Reply #7 on:** November 16, 2009, 03:18:21 PM »

They say a picture is worth a 1000 words. It's kind of a tradition here on our board to include a powder can in a cannon picture to give some real perspective. Irishman does that pretty well with the pictures of the cannons he builds that he post on his website.

But this is one of those times when his picture only has about 750 words...

South African Miniature Cannon Club Cannon No. 1.

This is no little desk top cannon!

RocklockI · « **Reply #8 on:** November 16, 2009, 03:28:49 PM »

Very Nice

intoodeep · « **Reply #9 on:** November 16, 2009, 03:43:12 PM »

That will look Great on a nicely stained and finished carriage. No Paint Required......

Soot · « **Reply #10 on:** November 16, 2009, 03:44:47 PM »

Holy Moly, that's awesome!

EL Caz 66 · « **Reply #11 on:** November 16, 2009, 03:52:02 PM »

I must concur with Double D I received the SAMCC no. #02 this afternoon. The Picture does it the no justice.. Next is to get her the perfect carriage..

Double D · « **Reply #12 on:** November 16, 2009, 04:02:46 PM »

GGaskill-George drew up the carriage plans and you will find them posted at SAMCC Plans Post.

BoomLover · « **Reply #13 on:** November 16, 2009, 08:08:22 PM »

Beautiful barrel, job well done, Michael! You continue to produce quality items that are a pleasure to own! Jim

GGaskill · « **Reply #14 on:** November 18, 2009, 09:42:02 AM »

DD has discovered that no dimensions were put on the barrel drawings for the trunnions. A note has been applied to the list of drawings on the original thread and it will be repeated below:

Trunnion diameter = .625"

Distance between ends of trunnions = 3.235"

A comparison of the original barrel and the drawings will show that the trunnions have been brought up to the barrel centerline vs the low mount of the original.

Max Caliber · « **Reply #15 on:** November 18, 2009, 10:20:31 AM »

Center line trunnions on the barrel will cause the barrel to sit lower in the carriage as shown in the drawings. A bit of modification may be required to compensate. I can't locate copies of the drawings, so I can't be more specific.

irishman · « **Reply #16 on:** November 18, 2009, 10:26:41 AM »

Quote from: GGaskill on November 18, 2009, 09:42:02 AM

DD has discovered that no dimensions were put on the barrel drawings for the trunnions. A note has been applied to the list of drawings on the original thread and it will be repeated below:

Trunnion diameter = .625"

Distance between ends of trunnions = 3.235"

A comparison of the original barrel and the drawings will show that the trunnions have been brought up to the barrel centerline vs the low mount of the original.

George, Your prints are beautiful! First thing one does before making chips, is, sit down with the prints! There isn't a diameter on the trunnion, but the proportion is perfect! I simply put a scale on the trunnion, bingo, it obviously was .625.

Michael

GGaskill · « **Reply #17 on:** November 18, 2009, 11:07:19 AM »

I can't locate copies of the drawings, so I can't be more specific.

Drawings.

Sample (actually better than shows here due to automatic reduction of the forum software; click for the drawing itself) :

1Southpaw · « **Reply #18 on:** November 18, 2009, 01:53:03 PM »

to hold that in my hands today . Very nice . Very , nice . Did I mention , Very very nice ?

Double D · « **Reply #19 on:** November 18, 2009, 01:54:04 PM »

Quote from: Max Caliber on November 18, 2009, 10:20:31 AM

Center line trunnions on the barrel will cause the barrel to sit lower in the carriage as shown in the drawings. A bit of modification may be required to compensate. I can't locate copies of the drawings, so I can't be more specific.

You are right, but the only thing that might be affected is the transom...and that is maybe. Even then a few strokes with a round wood rasp will get the correct clearance.

GGaskill · « **Reply #20 on:** November 18, 2009, 02:04:39 PM »

I did a virtual assembly of barrel and truck (the whole thing, not just the wheels) and there are no clearance issues. However, I did notice that the grooves for the trunnions on the cheeks were too small for the trunnions as drawn on the barrel, which were drawn larger than those on the original. So be forewarned that there is at least one discrepancy in the drawings. At least this one does not require putting material back into a oversize hole.

Measure twice, cut once. And check everything on paper before cutting, too.

irishman · « **Reply #21 on:** November 18, 2009, 02:17:45 PM »

Quote from: 1Southpaw on November 18, 2009, 01:53:03 PM

to hold that in my hands today . Very nice . Very , nice . Did I mention , Very very nice ?

1 Southpaw, Are you on the East Coast or the West Coast?

Michael

irishman · « **Reply #22 on:** November 18, 2009, 05:04:42 PM »

Quote from: Double D on November 02, 2009, 05:01:13 AM

Here is a picture of the original gun.

This gun was brought from Germany by one of the founders of the South African Miniature Cannon Club in Durban South Africa founded in the late 1960's. The gun was fired on a regular basis 30 years and was semi retired in the mid 90's. It is now only fired by guests and visitors to the SAMCC.

Thanks again to Brooks USA for producing this gun!

Has anyone seen these wheels anywhere for sale?

Michael

Max Caliber · « **Reply #23 on:** November 19, 2009, 01:25:23 AM »

After looking at the drawings, it appears that there will be only a bit of loss in elevating adjustment which should not cause a problem.

Double D · « **Reply #24 on:** November 19, 2009, 03:18:32 AM »

In has book Building 18th Century Naval Artllery Damian Siekonic says that style of wheel is the type used on Garrison guns. Standard wooden wheels were used on ship board guns

1Southpaw · « **Reply #25 on:** November 19, 2009, 05:38:12 AM »

I be in the North country of Montana , Just east of the Continental divide. North end of I-15

Double D · « **Reply #26 on:** November 19, 2009, 06:14:40 AM »

Southpaw is my neighbor, lives about 40 miles NE of me.

GGaskill · « **Reply #27 on:** November 19, 2009, 01:10:42 PM »

I still have all the .dwg files for these drawings so if you would prefer to have the "real" drawings instead of the gifs I have posted for the forum, send me a PM with your email address and I will forward them.

Michael,
Is the bore .500" or 33/64"? (Determines ball size.)

irishman · « **Reply #28 on:** November 20, 2009, 05:05:28 AM »

George,

I entered with a .516 ream, then kissed lightly with 600 grit

Michael

GGaskill · « **Reply #29 on:** November 20, 2009, 08:39:57 AM »

That should be fine for a .500" ball.