Author Topic: Primer debur on 204 brass (Read 370 times)

doninva · « **on:** October 31, 2009, 11:23:53 AM »

I was going to buy a deburing tool for the burr inside the 204 brass primer hole but everyone's goes from 22 cal up. Anybody know where to get one that does 204? thanks, Don

Graybeard · « **Reply #1 on:** October 31, 2009, 12:07:09 PM »

Sinclair should have them but WHY?

I used to actually see burrs inside the case on brass many long years ago and actually took the time to remove it on many of them but never was able to see a difference in accuracy from doing it. Lately I've not seen a case with a burr inside and quite honestly after so many times looking and seeing none I stopped looking. I've not done that (in my opinion useless operation) in at least ten or twelve years maybe longer.

gunrac · « **Reply #2 on:** October 31, 2009, 12:18:10 PM »

http://www.kmshooting.com/index.php

doninva · « **Reply #3 on:** November 01, 2009, 01:07:35 PM »

Thanks a lot. Don

Catfish · « **Reply #4 on:** November 02, 2009, 07:16:57 AM »

I`m like GB. save your time and money. Unless your shooting a bench gun in compation you will never find the improvement in accuracy.

cwlongshot · « **Reply #5 on:** November 02, 2009, 11:12:25 AM »

I have done this for years. Benefit or no, it's part of my case prep and will remain so...

CW

Author Topic: Primer debur on 204 brass (Read 370 times)

doninva

Primer debur on 204 brass

Graybeard

Re: Primer debur on 204 brass

gunrac

Re: Primer debur on 204 brass

doninva

Re: Primer debur on 204 brass

Catfish

Re: Primer debur on 204 brass

cwlongshot

Re: Primer deburr on 204 brass