Author Topic: pic of Reloading room/set up (Read 1978 times)

doublegunner · « **on:** November 11, 2009, 06:13:34 AM »

I'm changing around my reloading area and saw on some site a topic that showed 20+ pic of different loading set ups. Does any one know where I can find that.

Bob

3leggedturtle · « **Reply #1 on:** November 11, 2009, 08:59:25 AM »

leverguns.com had one about a month ago ther was about 3 pages of guys showing their reloading "areas"

swordfish · « **Reply #2 on:** November 12, 2009, 07:46:02 AM »

I saw that on AR a while back, but it was an on-going thread of peoples reloading benches.

Darrell Davis · « **Reply #3 on:** November 12, 2009, 02:06:17 PM »

Didn't see the requested post, but would sure recommend an underbench mounted receiver set up for tools.

This leaves the benchtop clean with no holes and allows for changing tools quickly.

Put this system in our new digs about 3 years back and really like it.

Keep em coming!

CDOC

3006softpoint · « **Reply #4 on:** November 15, 2009, 09:32:48 AM »

I just made a minnie reloading bench! 16 x 24 inch bench with the rock chucker attached ! Had to screw it to the wall! Resizing 7mm rem mag about tipped it over with out the screws! But when its 10/30 below outside i'm going to be processing thousands of cases! All nice and toasty in the basement! Small bench small clutter! Dale

Hairtrigger · « **Reply #5 on:** November 15, 2009, 09:51:12 AM »

When I built a new reloading room I thought about a quick change base on my bench to mount my presses and trimmer.
I decided it is easier to build a bigger bench. Even if the presses are not all mounted on the bench, they need to be stored somewhere.
Also, The key to consistant powder drops and progressive press consistancy is a SOLID bench and mount and I was not sure a quick change mount would provide that

Sweetwater · « **Reply #6 on:** November 15, 2009, 10:48:40 AM »

Years ago, my reloading bench was a piece of 2x12 4ft long fastened on two sets of drawers and screwed to the wall. Now, three houses later, I have two office type desks and two gun cabinets in what used to be the dining room!! Gotta love a woman that will give up her dining room for a gunroom! She is a Princess!

Regards,
Sweetwater

guntech59 · « **Reply #7 on:** November 28, 2009, 02:35:46 PM »

Nothing special here but, solid! The powder, primers and bullets are stored in the cabinets under the bench. The cabinets are on casters in case it needs to be moved. The bench is 2" laminated hardwood. I have an 18"x18"x1/2" piece of aluminum that the press was bolted to in my old setup. It was not needed with this one.

FourBee · « **Reply #8 on:** November 28, 2009, 04:53:04 PM »

Quote from: swordfish on November 12, 2009, 07:46:02 AM

I saw that on AR a while back, but it was an on-going thread of peoples reloading benches.

I saw that ! THey had everything that looked like vaults to Dr's. Offices. One looked like a converted Den, with TV and Lounge Chair. I didn't see a fridge or microwave ~ , I don't think.

Lloyd Smale · « **Reply #9 on:** November 29, 2009, 05:22:23 AM »

sorry but i have to show off

Lloyd Smale · « **Reply #10 on:** November 29, 2009, 05:30:23 AM »

here they are

Skunk · « **Reply #11 on:** November 29, 2009, 05:49:01 AM »

All reloading rooms are great, but Lloyd's is indeed extra special.

necchi · « **Reply #12 on:** November 29, 2009, 06:26:20 AM »

Sweet! (drool-drool)
But all that cartridge loading equipment, and there is a ML in the vise for display

Guess ya just can't beat "one cold shot"!!
That really is the original "hand loading" anyway's, ain't it??

p.s. Is the shotgun loaded?

cwlongshot · « **Reply #13 on:** November 29, 2009, 03:08:52 PM »

Maybe this one??

http://www.gboreloaded.com/forums/index.php/topic,122267.0.html

CW

Lloyd Smale · « **Reply #14 on:** November 30, 2009, 01:14:36 AM »

muzzle loader was in the vise because it was new and i was putting a scope on it that day. the shotgun is the son in laws and it is there for repair.

Quote from: necchi on November 29, 2009, 06:26:20 AM

Sweet! (drool-drool)
But all that cartridge loading equipment, and there is a ML in the vise for display
Guess ya just can't beat "one cold shot"!!
That really is the original "hand loading" anyway's, ain't it??

p.s. Is the shotgun loaded?

necchi · « **Reply #15 on:** November 30, 2009, 01:59:47 PM »

I just thought with all that gear, a little extra security is a wise thing.

There are alot of really nice set-ups here,,what with rising unemployment, theft and burglery are defenatly on the rise in my neck of the woods. I try to keep a low profile,,outa sight is outa mind ya know?

Skunk · « **Reply #16 on:** November 30, 2009, 02:02:36 PM »

A big, mean, German Shepherd hanging out in the reloading room helps too, Necchi.

cwlongshot · « **Reply #17 on:** December 01, 2009, 12:04:46 AM »

Quote from: Skunk link=topic=188234.msg 1098952373#msg 1098952373 date=1259629356

A big, mean, German Shepherd hanging out in the reloading room helps too, Necchi.

How about a Rott?

He is a Shepard/Rott mix, with all the best of both breeds. He WILL let you in... but you will be there when I get home!! he is protective of any child that's in his yard or home. Its almost erie, when no one is home, he will quietly watch whatever of whom ever. Until he has you cornered. Then he starts to growl...lo and loud. Scares the bejesus out of most first time visitors!!!

CW

Lloyd Smale · « **Reply #18 on:** December 01, 2009, 01:19:58 AM »

now heres a visious guard dog. If someone could only teach him to growl! Might lick you to death though!

Skunk · « **Reply #19 on:** December 01, 2009, 08:09:57 AM »

Quote from: cwlongshot on December 01, 2009, 12:04:46 AM

How about a Rott?

Yeppers CW, that would work.

Quote from: Lloyd Smale on December 01, 2009, 01:19:58 AM

now heres a visious guard dog. If someone could only teach him to growl! Might lick you to death though!

Lloyd,

If he didn't lick the burglar you to death, he would probably wear him out playing fetch, or begging him for ride in the Rhino.