« previous next »
Pages: [1]   Go Down

Author Topic: What do you guys think about this for a Handi Project  (Read 890 times)

0 Members and 1 Guest are viewing this topic.

Offline RangerJ

  • GBO Supporter
  • Trade Count: (1)
  • Member
  • *****
  • Posts: 88
What do you guys think about this for a Handi Project
« on: November 19, 2009, 02:54:30 PM »
I'm new here and have been reading and reading and reading and did I mention reading through the Handi Rifle section for a few days.Let me just say I am already addicted to these fine little guns.

 I have got a spare 243 Win barrel.It is a 24'' Bull barrel. I have been thinking about having it rebored and chambered for a big bore cartidge that isnt available through H&R.I have been researching an think I have decided on the 416 Rigby. According to Hodgdons reloading data site the pressure levels for the Rigby are below that of the 45-70 load data for the Ruger #1.I dont know about you guys but I think it would be kind of cool to have 416 Rigby in a Handi Rifle.Just keep in mind if I do this I will not be hotrodding it, but simply loading to moderate levels and have a little fun with it. Just think of the awww factor when you go to the range with a 416 Rigby Handi.So what do you guys think.
Logged

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #1 on: November 19, 2009, 02:57:06 PM »
Won't work, too much backthrust.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #2 on: November 19, 2009, 03:35:55 PM »
It might work at reduced pressures ok, but at full pressure, the huge .589" case head would create way too much breech thrust as Billy said. If you want a single shot 416 Rigby, get a TC Encore.  ;) If you want a .40 cal H&R, have it rechambered and rebored to 405 Winchester, but expect to spend about $300 for the rebore and a bit more for the rechamber. 

Tim

http://stevespages.com/page8d.htm
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #3 on: November 19, 2009, 03:47:31 PM »
Quick, Looking at the 450 3.25 that might work. And Hornady is making ammo for it now. That would be a new one in a Handi.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #4 on: November 19, 2009, 03:54:31 PM »
Lots of choices, the 45-120-3¼" is another that isn't as expensive to reload for as the 450NE and will meet or exceed the ballistics using smokeless powder, ala Tykempster.  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #5 on: November 19, 2009, 03:59:02 PM »
But Tim if ya had a 450 NE, you would have a caliber no one else had. ;)
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #6 on: November 19, 2009, 03:59:33 PM »
Yeah, another one!!!  ;D

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline RangerJ

  • GBO Supporter
  • Trade Count: (1)
  • Member
  • *****
  • Posts: 88
Re: What do you guys think about this for a Handi Project
« Reply #7 on: November 19, 2009, 04:20:49 PM »
What kind of performance can you get out of the 405 Winchester. Thats seems like it might be a good candidate for my project.
Logged

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: What do you guys think about this for a Handi Project
« Reply #8 on: November 19, 2009, 04:27:13 PM »
I have a 416 Rigby in a Ruger one.  I have never shot a Handi configured in a way that I would want to touch off a 416 Rigby factory load in....

but I would like a 405 winchester.....
Logged
"one shot is usually enough"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #9 on: November 19, 2009, 04:40:51 PM »
I get close to 2500fps with 300gr Hornadys in my 405Win H&R, but it has a 28" barrel, it's a rebored and rechambered 38-55 Target which is no longer available from H&R.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline RangerJ

  • GBO Supporter
  • Trade Count: (1)
  • Member
  • *****
  • Posts: 88
Re: What do you guys think about this for a Handi Project
« Reply #10 on: November 19, 2009, 04:46:25 PM »
Quote from: quickdtoo on November 19, 2009, 04:40:51 PM
I get close to 2500fps with 300gr Hornadys in my 405Win H&R, but it has a 28" barrel, it's a rebored and rechambered 38-55 Target which is no longer available from H&R.

Tim



Its a shame they quit making the 38-55.I have got one and absolutly love it.Mine is on of the later ones that had the corrected chamber dimension.

That 405 sounds like it might be a winner.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What do you guys think about this for a Handi Project
« Reply #11 on: November 19, 2009, 04:59:14 PM »
I have a 2007 38-55 also, I shoot 375Win loads in Starline long 38-55 brass, 220gr jacketed at 2375fps.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »