« previous next »
Pages: [1]   Go Down

Author Topic: H4198 Powder. Need some loads  (Read 1494 times)

0 Members and 1 Guest are viewing this topic.

Offline jim36

  • GBO Supporter
  • Trade Count: (47)
  • A Real Regular
  • *****
  • Posts: 534
  • Gender: Male
H4198 Powder. Need some loads
« on: December 04, 2009, 04:23:09 PM »
I was given a new 1 lb of H4198. I can't seem to find any loads for what I need. The 45 70 load I'm using with it is really good.
Is there any data available or do you have any good loads for:
30 06
270
243
35 Whelen
Just want to put this powder to work. No use just letting it sit in the container.
Give me what you have, if there's anything to be had for the mentioned cals.
                        Thanks
                                    Jim
Logged

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
Re: H4198 Powder. Need some loads
« Reply #1 on: December 04, 2009, 04:44:31 PM »
It's really too fast for the rounds you mention.  Works great in the 45-70 and 444 marlin to name a few.


Kevin
Logged
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: H4198 Powder. Need some loads
« Reply #2 on: December 04, 2009, 11:31:36 PM »
It is best in large straight walled cases and 222 Remington class cases. It is considered one of the best in the 222 Remington and 221 Fireball, but can do well in the 223, 6mm TCU, 7mm TCU and some times in the 204 Ruger and 222 Magnum. As mentioned, the bottle necked cases you mentioned have too large a capacity to use H 4198 effectively. Good Luck and Good Shooting 
Logged
Great men have vision and resolve to make dreams come true.

Offline 84Jim

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 220
  • Gender: Male
Re: H4198 Powder. Need some loads
« Reply #3 on: December 05, 2009, 01:53:20 AM »
Years ago American Rifleman published an article on reduced loads.  They recommended 35 grs. of either IMR or Hogden 4198 for 30-06, 150 gr. bullets.  I've used it with the IMR variety, several different 150 gr. bullets.  Its a good, accurate, low recoil load for practice of target shooting.  The article stated that 4198 was not position sensitive and therefore a good choice for reduced loads.
Logged

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: H4198 Powder. Need some loads
« Reply #4 on: December 05, 2009, 01:58:32 AM »
Reloader's nest lists some loads for the 06 and .270 using IMR4198. As others have said, this powder is not optimal for your uses, but information is available. You decide if it's reliable.  You have to be a member to see the actual data, (I'm not) but here's the link: http://www.reloadersnest.com/
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline chutesnreloads

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 331
  • Gender: Male
Re: H4198 Powder. Need some loads
« Reply #5 on: December 06, 2009, 05:55:55 PM »
If it's working so good in the 45-70 save it just for that.Won't take that many loads to use up one pound of powder.
Logged

Offline jim36

  • GBO Supporter
  • Trade Count: (47)
  • A Real Regular
  • *****
  • Posts: 534
  • Gender: Male
Re: H4198 Powder. Need some loads
« Reply #6 on: December 07, 2009, 08:02:39 AM »
The answers I rcvd are what I expected with this powder.
The H4198 is now the official 45 70 Powder. It does work well with this cal.
Thanks for the input.
                                  Jim
Logged
Pages: [1]   Go Up
« previous next »