Author Topic: New Whitworth Cannon (Read 3767 times)

dominick · « **on:** December 25, 2009, 02:46:17 PM »

Here's a cannon I just completed.

rifleshooter2 · « **Reply #1 on:** December 25, 2009, 02:50:42 PM »

Now thats sweet. I love whitworth's

Spuddy · « **Reply #2 on:** December 25, 2009, 02:52:26 PM »

Once again, I drooled a little.

Awesome gun!

EL Caz 66 · « **Reply #3 on:** December 25, 2009, 02:57:40 PM »

Nice!!

Can we see a close up on the breech area? So Is this one Capt. Ed mentioned on an earlier post?

PaulB · « **Reply #4 on:** December 25, 2009, 03:07:52 PM »

Very Nice! is the barrel rifled?

intoodeep · « **Reply #5 on:** December 25, 2009, 03:16:58 PM »

Dom,

It's a work of art!!!!! Nice Job!!!!

dominick · « **Reply #6 on:** December 25, 2009, 04:13:55 PM »

Here's the breech. It's a smoothbore.

Frank46 · « **Reply #7 on:** December 25, 2009, 06:37:53 PM »

Dom, that's a beauty for sure. Thanks for posting. Frank

KABAR2 · « **Reply #8 on:** December 25, 2009, 06:56:33 PM »

So Dom,

Looks good!

Is this a piece of 40mm barrel you bought from Cannonmn?

Ex 49'er · « **Reply #9 on:** December 25, 2009, 08:52:09 PM »

As always a great looking cannon, Dom!! And wooden wheels to boot! Looks like it's time to start another wish list.

BoomLover · « **Reply #10 on:** December 25, 2009, 09:07:30 PM »

Yep, that would go on a wish list, for sure! Beauty, Dom! BoomLover

Max Caliber · « **Reply #11 on:** December 26, 2009, 01:02:50 AM »

Dom, I like that a lot, nice work. One in 3/4 scale would look nice on my number one carriage.

Max

Cpt Ed · « **Reply #12 on:** December 26, 2009, 01:53:41 AM »

YES, the cat is out of the bag.

That is my New Years present from Santa Dom’s “Toys-for-Big Boys” Ordnance Works.

Should arrive here by the first of the New Year.

Many thanks to Dom for this fine creation.

Cpt Ed

Cannoneer · « **Reply #13 on:** December 26, 2009, 06:12:02 AM »

Cpt Ed,
That looks like a fine new addition to your collection.

JeffG · « **Reply #14 on:** December 26, 2009, 06:25:33 AM »

Very nice!! Excellent work!!

EL Caz 66 · « **Reply #15 on:** December 26, 2009, 07:20:23 AM »

Congrats Cpt. Ed!! Nice work as always Dom..

Parrott-Cannon · « **Reply #16 on:** December 26, 2009, 09:14:35 AM »

Dom, what are the dimensions? Great work!

dominick · « **Reply #17 on:** December 27, 2009, 02:52:53 AM »

Thanks for the compliments. The barrel length is 44" less handle and vent shield, 1.75" bore, 4.5" diameter breech with a 1/2 degree taper cut from the front of the breech band to the muzzle, 1.75" trunnion diameter. Wheel diameter is 28" wheels, carriage length is about 48". I started with a 4 foot piece of 3-1/2"od x .875 wall 1026 cold drawn seamless for the main tube. Dom

Parrott-Cannon · « **Reply #18 on:** December 27, 2009, 03:29:16 AM »

Do you have any pictures with the breech open / in operation?

Terry C. · « **Reply #19 on:** December 27, 2009, 04:15:24 AM »

My first impression was that it's a muzzleloading replica of a breechloader.

Of course, if the breech mechanism actually works then that's just icing on the cake.

intoodeep · « **Reply #20 on:** December 27, 2009, 04:22:58 AM »

Quote from: Parrott-Cannon on December 27, 2009, 03:29:16 AM

Do you have any pictures with the breech open / in operation?

Parrot-Cannon,

This Whitworth has a "mock" breech, it was made as a muzzleloader. There is a standard vent on the top of the tube. I think Dom did an awesome job reproducing the breech to look like an original.

dominick · « **Reply #21 on:** December 27, 2009, 04:54:40 AM »

I was waiting to see if anyone noticed that. It's a muzzleloader. The hinge is nothing more than a piece of solid round with grooves cut into it to appear as if it's three seperate pieces. It is cut into a piece of split rectangle tubing that's welded to the side of the breech tube. The rear handle is removable. The vent is at the top of the barrel.

a4beltfed2000 · « **Reply #22 on:** December 27, 2009, 08:15:09 AM »

What is the price on one of these barrels?

kevin

Ex 49'er · « **Reply #23 on:** December 27, 2009, 08:26:08 AM »

Doggone it to heck and back! I was looking forward to ordering a breech loader barrel in some funky size.
It still looks good, tho.
Great work Dom. You had us fooled.

dominick · « **Reply #24 on:** December 27, 2009, 03:27:35 PM »

Quote from: a4beltfed2000 on December 27, 2009, 08:15:09 AM

What is the price on one of these barrels?

kevin

Kevin, This is one of the last large barrels I will be building. I may possibly offer it as a 1/6 scale rifled or smoothbore breechloader. Possibly.

phantom · « **Reply #25 on:** December 27, 2009, 03:33:16 PM »

Dom where did you get the wheels or did you build them?

Nice work!

Brian

BoomLover · « **Reply #26 on:** December 27, 2009, 09:09:13 PM »

Dom, sorry to hear you'll not be building any more large barrels! So, what will be the largest you will work on from now on? You are still staying in the business, aren't you, we hope?

Cpt Ed · « **Reply #27 on:** December 28, 2009, 01:41:30 PM »

Quote from: phantom on December 27, 2009, 03:33:16 PM

Dom where did you get the wheels or did you build them?

Brian, the wheels were made in Ohio by a wheelwright and sent directly to Dom for this build.

PM me for information.

Cpt Ed

dominick · « **Reply #28 on:** December 28, 2009, 05:13:03 PM »

Quote from: BoomLover on December 27, 2009, 09:09:13 PM

Dom, sorry to hear you'll not be building any more large barrels! So, what will be the largest you will work on from now on? You are still staying in the business, aren't you, we hope?

I am staying in business. The largest field cannon in my new inventory will be about a 1/4 scale. I'll also have golf ball and soda can mortars, a few naval cannons, handgonnes, and cheroot canes with different style civil war barrels, Parrott, Sawyer, Napoleon, etc. I still have about six large projects to build before I can concentrate on new inventory. These large orders have to be completed by the end of February.

a4beltfed2000 · « **Reply #29 on:** December 29, 2009, 03:10:51 AM »

Dom,

Will you offer the whitworth cannon in the 1/4 scale? will that size be chambered for golf balls? When you say 1/4 scale what will the overall length be? I'm saving up for one of your barrels, just want to make sure that I can get it. would also love to have a whitworth style cannon $:-\$