« previous next »
Pages: [1]   Go Down

Author Topic: 280-- 280ai  (Read 426 times)

0 Members and 1 Guest are viewing this topic.

Offline ovadoc

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
280-- 280ai
« on: December 27, 2009, 03:48:13 PM »
1. would appreciate info on this   :  I have a 280 nef , is rechambering to 280AI a DIY project ?  2. also what steps and expenses are ionvolved   3. Is it justifiable ? would be using on elk and muleys next fall : though my outfitter doesn't like single shots as "elk are very tough"  ----- am new here but have learned Tim has done this       thanks Cam             
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 280-- 280ai
« Reply #1 on: December 27, 2009, 05:31:50 PM »
Unless the barrel is refitted to the frame, it can't become an Ackley chamber that is capable of shooting factory 280 ammo, but you can have it rechambered and used fire formed handloads only in it, you'll gain about 100fps or a little more, see handloading for an improved chamber in the FAQs.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline taylorce1

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 117
Re: 280-- 280ai
« Reply #2 on: December 28, 2009, 10:50:34 AM »
Quote from: quickdtoo on December 27, 2009, 05:31:50 PM
Unless the barrel is refitted to the frame, it can't become an Ackley chamber that is capable of shooting factory 280 ammo, but you can have it rechambered and used fire formed handloads only in it, you'll gain about 100fps or a little more, see handloading for an improved chamber in the FAQs.

Tim

I've been thinking of doing the very same thing to my Handi.  So how does one set back the barrel to properly headspace the AI chamber?  When facing off the barrel to do the set back, how does one move the ejector/extractor as well?  I can see where a guy could ream out the 7-08 barrel to a .280 AI, but what if a guy wants a .30-30 AI or .22 K-Hornet? 
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 280-- 280ai
« Reply #3 on: December 28, 2009, 11:00:18 AM »
30-30AI is a simple hand rechamber, just be careful not to cut the chamber too deep, or there will be no support for the shoulder and you'll get split shoulders on fire formed brass, even tho it head spaces on the rim, the shoulder still needs support for the thin brass.

The ejector/extractor slot has enough free space to work after refacing the barrel to effectively set the barrel back, I did a .270 Win barrel that way, it works fine, did the rechamber by hand also, a second hand barrel that won't fit due to the underlug being a bit too long would be an ideal candidate for an Ackley rechamber when fitted to another chamber.

Tim

http://www.gboreloaded.com/forums/index.php/topic,186199.msg1098919401.html#msg1098919401
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »