« previous next »
Pages: [1]   Go Down

Author Topic: Where do you get the cheapest steel shim stock/feeler gauges?  (Read 1207 times)

0 Members and 2 Guests are viewing this topic.

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Where do you get the cheapest steel shim stock/feeler gauges?
« on: December 28, 2009, 06:36:27 PM »
Bought my first set of feeler gauges at Ace Hardware today. $9.99. On a used 45-70 barrel and the preferred SB2, it almost locked up perfectly with no help. Tiniest side to side wiggle. An .0015 feeler gauge (the thinnest in the set) would not pull out. Guess I needed thinner, but I was unwilling to hack a $10 feeler gauge up. Tried a seltzer can. Too thick. Barrel would not lock up.
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #1 on: December 28, 2009, 07:26:36 PM »
You only need to cut a half inch off the .0015 gauge for a shim, so you will still have a lot of it to work with.  You have already spent the $10.00 so go for it.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #2 on: December 29, 2009, 06:32:09 AM »
feeler gauges are getting harder and harder to find at yard sales, garage sales, and estate sales but I still look everytime my wife and I stop at one. She goes into the house and I hit the cellar, garage, and outbuildings, and we each enjoy ourselves. As Larry says you just need a small piece of feeler gauge, so go for it....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #3 on: December 29, 2009, 06:36:54 AM »
you could smack that can metal with a hammer to convince it to thin out a bit ?
Logged
If ya can see it ya can hit it !

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #4 on: December 29, 2009, 07:45:45 AM »
I'm lucky enough to have a good friend that works at a machine shop. He keeps me well stocked with shim stock. If there is one near you, you can get the stuff down to tissue paper thickness!!!

Maybe try Brownells as well!!

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #5 on: December 29, 2009, 08:24:29 AM »
Brownell's sells a shim stock kit for $25. If you have a local Harbor Freight store, they sell feeler gauge sets for $3.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #6 on: December 29, 2009, 08:59:53 AM »

Auto Zone..$6.95 Part Number:   25025

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline mdi

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 399
  • Gender: Male
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #7 on: December 29, 2009, 09:35:25 AM »
McMaster Carr has shim stock avail. in several materials; brass, plastic, steel, etc.

http://www.mcmaster.com/#shim-stock/=559ug3
Logged

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #8 on: December 29, 2009, 09:53:43 AM »
Harbor Freight huh? One about 45 minutes away. I got an oil change this am and there was an Auto Zone across the street. Bought the $6.99 one. Looks the same as the Ace Hardware one.

Even better, I stopped at fun store on the way home and picked up another 22-250. Non matching S/N on barrel, non monte carlo pallet wood stock without buttplate, but with Limbsaver slip on, H&R scope base, but no hammer extension. Got home and the 45-70 barrel plus seltzer can shim is a perfect fit. Maybe I'll return the feeler gauges now....lol
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #9 on: December 29, 2009, 10:04:14 AM »
Congrats on the new to you Handi!!

Here's the shim discussion in the FAQs barrel fitting info, my source was smallparts.com they carry steel shim stock by the sheet for $3-$6, you don't have to buy a whole pack like McMaster-Carr requires.

Tim

http://www.gboreloaded.com/forums/index.php/topic,139005.msg1098545008.html#msg1098545008
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline jeepmann1948

  • GBO Supporter
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 1422
  • Gender: Male
  • San Angelo, Texas
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #10 on: December 29, 2009, 12:51:26 PM »
Bearing Stores, Industrial Supply Stores, Machine Shops (the small ones are the best) are good places to find Shim Stock, At mine we keep brass, stainless and steel from .0015 to .032. most stores sell by the inch or by the roll but expect to pay more by the inch than per foot in the roll.
Logged
"it ain't what you shoot em with......................
  it's where you hit em "

Offline 26-t

  • Retired
  • GBO Supporter
  • Trade Count: (21)
  • Contributor
  • *****
  • Posts: 307
  • Gender: Male
  • Father and Son At Bonneville SpeedWeek 07
Re: Where do you get the cheapest steel shim stock/feeler gauges?
« Reply #11 on: December 29, 2009, 01:46:03 PM »
McMaster Carr is a great place to deal with. Grainger ,Enco or KBC  also carry shim stock. I use stainless steel shim with no problems.  Good Luck 26-t
Logged
Pages: [1]   Go Up
« previous next »