« previous next »
Pages: [1]   Go Down

Author Topic: rebarrel on a nagant????  (Read 799 times)

0 Members and 1 Guest are viewing this topic.

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
rebarrel on a nagant????
« on: December 28, 2009, 10:27:12 PM »
?????
i wondered about re barreling a Nagant m91/30 or m44   the rim on the 500s&W is same as a 762x54r     montana riflesmiths make a .500 barrel in raw and stainless unchambered     mod the mag well with a dremmel very carefully     and rebarrel to 500 S&W  for an indiana deer rifle?  just a thought what should it cost to remove and reinstall a barrel   thread one new one   and cutting chamber if i rent a reamer?????
kinda curious       benefit??? durable classic military action!!! dependable!!!!  and legal for indiana pistol cartridge rifle season
   i cannot find a remmy 788 in 44mag  so this could be an option?????
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: rebarrel on a nagant????
« Reply #1 on: December 29, 2009, 12:43:47 PM »
The nagant would likely work for this conversion but the straight 500S&W may require a bit more than just mild conversion of the rails to get it to feed. I would consider the use of an autopistol magazine in the mag well. This will position the round for correct feeding and provide the feed lips to feed a rimmed straight cased round such as this. A centerfeed mag such as the 340 or 788 would likely be the best starting point.. anything else would likely be too small. Costs would be something else. A local smith might be your best bet or perhaps Montana Rfielsmiths could be persuaded to undertake the task..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline wtroger

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 343
Re: rebarrel on a nagant????
« Reply #2 on: January 01, 2010, 05:44:41 PM »
I did one of these the feed rails is a PITA Th rifle shoots real well
Logged

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: rebarrel on a nagant????
« Reply #3 on: January 02, 2010, 10:10:30 AM »
The russian gun does not feed like a modern Remington or Savage, it has a mechanical system to allow each round in turn into the loading position.  It may work fine with the 500 S&W.  Larry
Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline anweis

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 557
Re: rebarrel on a nagant????
« Reply #4 on: January 11, 2010, 07:37:33 AM »
Quote from: matthewquigley on December 28, 2009, 10:27:12 PM
?????
i wondered about re barreling a Nagant m91/30 or m44   the rim on the 500s&W is same as a 762x54r     montana riflesmiths make a .500 barrel in raw and stainless unchambered     mod the mag well with a dremmel very carefully     and rebarrel to 500 S&W  for an indiana deer rifle?  just a thought what should it cost to remove and reinstall a barrel   thread one new one   and cutting chamber if i rent a reamer?????
kinda curious       benefit??? durable classic military action!!! dependable!!!!  and legal for indiana pistol cartridge rifle season
   i cannot find a remmy 788 in 44mag  so this could be an option?????

It would be an interesting project if you want to do all of the work as a hobby type thing. It would be an utter waste of money because you will have the following problems:
1. need to remove the old barrel first; this is difficult on MN rifles, becuase the receiver tends to twist. You will need special wises and jigs to prevent damage to receiver.
2. You will need to alter the feeding quite a bit, and it may not work in the end. Better leave it as a single shot.
3. You need new barrel.

By the time all is said and done, it will probably cost 3 times as much as a Handi Rifle in that caliber.
Logged

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: rebarrel on a nagant????
« Reply #5 on: January 11, 2010, 11:50:13 AM »
a smith in spring creek nevada built one up in 45-70
Logged
the nation that forgets it defenders will itself be forgotten

Offline Kmrere42

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 305
Re: rebarrel on a nagant????
« Reply #6 on: January 12, 2010, 03:15:25 PM »
How did the 45/70 version turn out???

I was thinking the same thing.



Paul
Logged

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: rebarrel on a nagant????
« Reply #7 on: January 12, 2010, 03:40:02 PM »
 great according to the owner of the gun he was real happy with it.
Logged
the nation that forgets it defenders will itself be forgotten
Pages: [1]   Go Up
« previous next »