Author Topic: Twist  (Read 961 times)

0 Members and 2 Guests are viewing this topic.

Offline qajaq59

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
Twist
« on: January 06, 2010, 02:17:27 AM »
Does anyone happen to know what the twist is on a Remington 700 ML? And would it be better for round balls or the sabots?

Offline Underclocked

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 629
Re: Twist
« Reply #1 on: January 06, 2010, 06:22:32 AM »
Definitely a faster twist rifle that was designed for either sabots or heavier conicals.  1:28" I think although it might have been 1:24".    It still wouldn't hurt to try patched roundball if you keep the charges very light.  Might be fairly accurate with 50 grains or less of powder.
WHUT?

Offline flintlock

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1405
  • Gender: Male
Re: Twist
« Reply #2 on: January 06, 2010, 09:23:38 AM »
I think it's 1-28...I know that my brother has one that will stack a 250gr Barnes MZ on top of one another with 100grs of Pyrodex behind them...

Offline sabotloader

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 783
Re: Twist
« Reply #3 on: January 06, 2010, 09:30:51 AM »
qajaq59

The Rem 700ml is 1/28 for both the 45 and 50 caliber guns...
Keep shooting muzzleloaders - they are a blast....

Offline qajaq59

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
Re: Twist
« Reply #4 on: January 06, 2010, 11:55:08 AM »
Thanks guys, believe me your info is appreciated. I've been a reloader forever and a caster for quite a while. But I don't know diddly about BP rifles. From this thread I gather I should buy a mold for the lead lube conical bullets and go that route first?

Offline builder459

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Re: Twist
« Reply #5 on: January 06, 2010, 03:44:21 PM »
Either that or buy from a quality conical bullet maker.

Offline gray-wolf

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 127
Re: Twist
« Reply #6 on: February 06, 2010, 03:48:47 AM »
I think you may be disappointed with conical in that 1-28 twist.  They are at there best with a sabot.
  Most 50Cal. conical shooters use a 1-24 twist with heavy lead slugs for best accuracy.
With the 1-20 for the 45 CAL.
  Can you shoot all lead slugs?--sure.  will you get the bet performance? proly not.
Will patched round ball work ?  YUP will it be accurate? short range and for plinking with a reduced load.
  Call the gun maker.

Offline qajaq59

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 503
  • Gender: Male
Re: Twist
« Reply #7 on: February 06, 2010, 06:18:39 AM »
The round ball is probably never going to make it for hunting from what I have seen so far. However, the conical seems to have promise. Long way to go though, so we'll see. Most of the fun is trying!

Offline toytruck

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 240
Re: Twist
« Reply #8 on: February 06, 2010, 01:26:02 PM »
 :-\
Whites & TC Renegade


Life may change us, but we start and end with family.

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: Twist
« Reply #9 on: February 06, 2010, 05:05:05 PM »
The round ball is probably never going to make it for hunting from what I have seen so far. However, the conical seems to have promise. Long way to go though, so we'll see. Most of the fun is trying!

qajaq59,

Get yourself a good lead conical in the 430 to 460 grain class, and you will be surprised how well your 1:28 twist rifle will shoot them. Another option would be the 350 grain Hornady FPB's. These are from a 1:28 twist NEF Huntsman, it will shoot these bullets around MOA or under all day long. Forget the 385 gr Hornady Great Plains and Buffalo Bullets, they just never shot well out of any of my rifles.


From L to R; 350 gr Hornady FPB, 430 gr White Super Slug, 440 gr White Power Punch, 460 gr No Excuses, 480 gr White Super Slug.


All targets were shot with a 1:28 twist NEF Huntsman.





















U.S.A.F. Veteran
NRA Life Member