Author Topic: New to me 22 hornet frame question  (Read 593 times)

0 Members and 2 Guests are viewing this topic.

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
New to me 22 hornet frame question
« on: January 13, 2010, 07:41:38 AM »
I bought a complete almost new 22 hornet off of one of the members of this board and it is already showing promise what little I have shot it.  My question relates to the fact that it is a 1999 frame (one of the years that they were outsourced) and when I try to install any other barrel, the roll pin that trips the ejector/extractor will not go past the lip in the frame.  The lip extends about 1/8th inch farther to the rear of the gun than my newer or older frames.  I am not planning on doing anything about it, but in the future I am planning on having a 357 barrel added to the frame and was wondering if Illion would be able to fit it to this frame. 

Thanks,
Matt
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck

Offline briannmilewis

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 1017
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #1 on: January 17, 2010, 07:37:50 AM »
At the top of this page is a thread that Tim says only frames from 2000 will be fitted with high pressure barrels from now on.

http://www.gboreloaded.com/forums/index.php/topic,195939.0.html

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #2 on: January 17, 2010, 08:23:49 AM »
Yes I know about the High pressure restriction but 357 is not considered to be high pressure.  They offer it from the factory on an sb1 Frame. 

Thanks,
Matt
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #3 on: January 17, 2010, 09:25:58 AM »
I think they will Matt, they'll address the frame issue when they fit the barrel, it wouldn't take much modification to allow it to  work.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #4 on: January 17, 2010, 02:04:25 PM »
Thanks Tim, That was the answer I was looking for.  I didn't know if they would modify frames or not. 

Thanks,
Matt
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck

Offline john-78

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #5 on: January 17, 2010, 02:22:02 PM »
matt,  I just sent my 1998 sb1 to get .357 when I called them to check if it could be done, the guy told me it wasn't a problem.

                           john

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #6 on: January 17, 2010, 04:53:02 PM »
John,  Thanks for your experience.  I assumed from the FAQ's that they would have no problem fitting a 357 barrel on the 1999 frame but I was concerned about the frame fitting issues.  But it is nice to know that they still have no problem fitting them since the move to Ilion.

Thanks,
Matt
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck

Offline john-78

  • Trade Count: (0)
  • Member
  • *
  • Posts: 88
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #7 on: January 18, 2010, 12:13:46 AM »
i would still call and check first, they just raised prices a couple of day's ago.  For this barrel, please call Customer Service at (866) 776-9292 to see if it can be fitted to your receiver.  9am-5pm est

Offline Matt3357

  • Trade Count: (9)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: New to me 22 hornet frame question
« Reply #8 on: January 18, 2010, 10:16:52 AM »
I plan on it when I get the funds together later in the year.  I'm still recovering from Christmas and the 22 hornet. 

Thanks,
Matt
_____________________________________________________________

Matt

"People never lie so much as after a hunt, during a war or before an election."
-Otto von Bismarck