Author Topic: question (Read 581 times)

fuzznutts · « **on:** January 31, 2010, 05:03:12 AM »

with the older contender frame be tuff enuff to put muzzelloader barrels on off of a g2 contender,,,,,

DEACONLLB · « **Reply #1 on:** January 31, 2010, 07:04:01 AM »

The muzzleloader barrel will only fit the g2 because of the way it is made. It has a pin that sticks down from the bottom and this pin will not clear frame in old style contender. I have heard of the pin being cut off so it will fit but this voids any warranty that you may have. I would think that would be the only issue as far as preasures are concerned.

Deaconllb

Keith L · « **Reply #2 on:** January 31, 2010, 07:29:14 AM »

I understand the word from TC is that original Contenders were prone to rust on internal parts from the aftermarket muzzleloader barrels.

swampthing · « **Reply #3 on:** January 31, 2010, 11:26:13 AM »

Strange I don't know why, as only the barrel is subjected to the pressure from the shot. The breechplug and 209primer prevent any significant pressure from "reaching" the frame.

Keith L · « **Reply #4 on:** January 31, 2010, 02:37:06 PM »

Pressure is not the issue. In fact you will never see anything from TC saying the G2 is any stronger or can take any more pressure that the original.

Author Topic: question (Read 581 times)

fuzznutts

question

DEACONLLB

Re: question

Keith L

Re: question

swampthing

Re: question

Keith L

Re: question