Author Topic: 26in. magnaported 209x50  (Read 355 times)

0 Members and 1 Guest are viewing this topic.

Offline b44mag

  • Trade Count: (17)
  • A Real Regular
  • ****
  • Posts: 750
  • Gender: Male
26in. magnaported 209x50
« on: February 02, 2010, 12:36:31 PM »
hey guys anyone shoot this brl. im thinking of getting one have a few ?
dose the port work and how
i use loose powder so does it fall out of the ports when poring it in
does it shoot better then the non ported or do you shoot better because of the port because it does not recoil as much
if this is not the place i asked on the inline thread no responce
dont want to buy if there is no advantage
let me know what you think
thanks b44mag

Offline swampthing

  • Trade Count: (6)
  • A Real Regular
  • ****
  • Posts: 517
Re: 26in. magnaported 209x50
« Reply #1 on: February 02, 2010, 01:55:31 PM »
I have had the 26" barrel w/no ports, very accurate. I have the 20" Katadin barrel w/ports. I'd say don't bother, never had a problem with 777 ffg, very accurate also, but loud. The slight recoil reduction does not seem worth the extra noise. Muzzle rise with the longer barrels is not really an issue for me, so, again I would not opt for the extra work for that aspect either.
  By the way, unless you absolutley need the flatest trajectory possible, you may want to try 50-70g of 777 ffg. I load a 335g .452" LBT Hardcast bullet on top of 55g for 1250fps or so out of the 20" tube, plenty flat for 100+yds. Doubt you'd find an animal that would hold on to that slug.
 If you like it buy it. If I was a little more daring, I'd have my barrel cut where the ports began to delete them.

Offline 1marty

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 751
Re: 26in. magnaported 209x50
« Reply #2 on: February 02, 2010, 03:13:26 PM »
don't waste your money. Porting only has a very minor effect on barrel jump.

Offline b44mag

  • Trade Count: (17)
  • A Real Regular
  • ****
  • Posts: 750
  • Gender: Male
Re: 26in. magnaported 209x50
« Reply #3 on: February 03, 2010, 10:01:30 AM »
thanks guys that is what i thought
      thanks b44mag