« previous next »
Pages: [1]   Go Down

Author Topic: 10 ga barrel on a 12 ga reciever?  (Read 739 times)

0 Members and 1 Guest are viewing this topic.

Offline Andrew Quigley

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
  • Gender: Male
10 ga barrel on a 12 ga reciever?
« on: February 08, 2010, 04:18:50 AM »
Can I do this swap? Checked the FAQ but didn't see anything discussing swaps on shotguns. The frame on the 410, 20 and 12 all look the same but haven't seen a 10 up close and would like to fit one to my 12's reciever.
Logged
Andrew

"Lost!!  Ain't never been lost. Fearsum confused for 2 or 3 months but never lost!!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #1 on: February 08, 2010, 05:46:44 AM »
No, 10ga barrels have bigger chamber swells and won't fit an SB1 frame, they require the SB2 shotgun frame that comes on 10ga shotguns and 12ga Ultra Slug Hunters.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Andrew Quigley

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #2 on: February 08, 2010, 09:42:55 AM »
Hmmm. I thought the rifle's were the SB1 and all the shotguns were SB2's. Course we all know what assuming makes ya. LOL!!
Logged
Andrew

"Lost!!  Ain't never been lost. Fearsum confused for 2 or 3 months but never lost!!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #3 on: February 08, 2010, 10:22:20 AM »
Shotgun frames are SB1(they do put 357 and 44 mags on SB1 frames tho)

Centerfire rifle frames are SB2

10ga/12ga USH frames are SB2 shotgun frames, not to be confused with SB2 rifle frames, thanks a lot H&R!!  ::)

Rimfire frames are SS1.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Andrew Quigley

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #4 on: February 08, 2010, 03:09:48 PM »
Good grief Charlie Brown!!  LOL!! Thanks for the info.
Logged
Andrew

"Lost!!  Ain't never been lost. Fearsum confused for 2 or 3 months but never lost!!"

Offline Andrew Quigley

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #5 on: March 12, 2010, 04:12:21 AM »
Can you put a rifle barrel on the 10ga frame then?
Logged
Andrew

"Lost!!  Ain't never been lost. Fearsum confused for 2 or 3 months but never lost!!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #6 on: March 12, 2010, 04:45:07 AM »
Not without some work bedding the underlug in the larger frame opening, the rifle chamber swell is too small to fit well, and the large firing pin and hole in the breech face will cause problems with higher pressure rounds.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Andrew Quigley

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 142
  • Gender: Male
Re: 10 ga barrel on a 12 ga reciever?
« Reply #7 on: March 12, 2010, 07:16:27 AM »
So much for that idea. LOL!  Reckin I'm changing my mind about an ol' 10 ga. Don't think I want a stand alone frame.
Logged
Andrew

"Lost!!  Ain't never been lost. Fearsum confused for 2 or 3 months but never lost!!"
Pages: [1]   Go Up
« previous next »