« previous next »
Pages: [1]   Go Down

Author Topic: .358 Gremlin?  (Read 3058 times)

0 Members and 1 Guest are viewing this topic.

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
.358 Gremlin?
« on: February 12, 2010, 09:49:08 PM »
 Ok guys, we are looking for excuses to modify or buy. I was looking at the .358 BFG, but what about the Gremlin?
 I barrowed the below from Bryan at   http://www.bfgcartridges.com/358Gremlin.html He is a new sponsor to GBO and Our only sponsor to the Indiana forum.

Quote
The 358 Gremlin was designed to run in the AR-15 platform,
duplicating the velocity of 35 Remington factory loads.

It is equally content in any bolt action rifle with a 7.62x39/PPC bolt
face or T/C Contender/Encore.

180g Hornady SSP's to 2325 fps out of a 17.25" 1/12 twist
AR-15 barrel using a modest charge of Lil Gun.

The cartridge was inspired by the 9x39 Russian, our version is
formed using commonly available 6.5 Grendel or Winchester
7.62x39 brass. 

Well guys, whats your thoughts?

Bryan if you read this, what barrel and barrel work would be needed to do a H&R?

Lonny
 
Logged

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: .358 Gremlin?
« Reply #1 on: February 12, 2010, 10:44:19 PM »
If you want some thing different or have an AR 15 it should get the job done. As far as ballistics are concerned, it is not ahead of the 357 Max by much. You can not put a price on having some thing different. Let  us know how it works out. Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: .358 Gremlin?
« Reply #2 on: February 12, 2010, 11:42:02 PM »
 I am waiting on the reamer to do my Magnum to Maximum. But I was on the site, and it looked interresting. ;)

Lonny
Logged

Offline Dinny

  • Moderator
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: .358 Gremlin?
« Reply #3 on: February 13, 2010, 01:51:10 AM »
I wanna be the first kid on my block to have one, so much, I am making plans already to buy a Encore frame. :o  The Handi Gods might get angry at me, think they will ever forgive me? LOL  ;) ;D

Thanks, Dinny

Logged
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline hicard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
Re: .358 Gremlin?
« Reply #4 on: August 03, 2011, 01:39:20 PM »
The more I look into this caliber the more I want one.  Looks like there isn't much interest in it though.  A semi auto 35 should be one heck of a moderate range deer/hog whacker I would think.  Anyone know who is making AR-15 uppers and loading dies for this caliber?
Logged

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: .358 Gremlin?
« Reply #5 on: August 03, 2011, 02:02:29 PM »
Did you ask them at BFG.?  I do not know for sure, but I would ask and if they didn't maybe they could point you in the right direction. http://www.bfgcartridges.com/358Gremlin.html
 
I have about convinced myself to wait and see when Indiana goes to the 1.80" case length. Then I am going to work at a .35 Rem and shorten to legal case length ;) . Just seems to me it is proven already. And it would not take a lot of work on the case. I am lazy so it would be a good match for me. ;)
 
Lonny
Logged

Offline tatonka

  • GBO Supporter
  • Trade Count: (27)
  • Avid Poster
  • *****
  • Posts: 158
  • Gender: Male
Re: .358 Gremlin?
« Reply #6 on: September 14, 2011, 04:37:46 AM »
I  get those velocities out of my Encore safely in 357 maximum with Hornady SSP 180 gr bullets shooting Lil'Gun. Good shooting.
Logged

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: .358 Gremlin?
« Reply #7 on: September 14, 2011, 02:17:01 PM »
Quote from: tatonka on September 14, 2011, 04:37:46 AM
I  get those velocities out of my Encore safely in 357 maximum with Hornady SSP 180 gr bullets shooting Lil'Gun. Good shooting.

I am with you on that one. My Handi Max prooved its self last year 8)  Have a Contender that is still waiting to proove its self. The new law(if passed) is an excuse for me to buy something different ;)
 
Lonny
Logged

Offline dave29

  • GBO Supporter
  • Trade Count: (93)
  • Senior Member
  • *****
  • Posts: 1256
Re: .358 Gremlin?
« Reply #8 on: September 14, 2011, 02:33:01 PM »
Quote from: Lon371 on September 14, 2011, 02:17:01 PM
Quote from: tatonka on September 14, 2011, 04:37:46 AM
I  get those velocities out of my Encore safely in 357 maximum with Hornady SSP 180 gr bullets shooting Lil'Gun. Good shooting.

I am with you on that one. My Handi Max prooved its self last year 8)  Have a Contender that is still waiting to proove its self. The new law(if passed) is an excuse for me to buy something different ;)
 
Lonny

That's what I am waiting for as well. I did buy a .460 S&W Mag in a ProHunter, and it is a sweet gun. But, If the law is passed, I will definitely be buying something in the WSSM 1.8" class for an Encore frame.
Logged
Pages: [1]   Go Up
« previous next »