Author Topic: Congrats Tim!! (Read 1382 times)

Big Blue · « **on:** February 13, 2010, 08:00:03 AM »

Congrats on reaching 30,000 posts. While I'm at it I want to say thanks for all the help and information you've given out throughout those 30,000 posts. Without a doubt, you have made this site the best there is for Handi rifle owners.
Thanks,
Don

Piney · « **Reply #1 on:** February 13, 2010, 08:05:35 AM »

THANKS Tim for all that you do!

bigvarmnt · « **Reply #2 on:** February 13, 2010, 08:11:13 AM »

I'll have to second that, maybe third by the time I get done typing

Thanks for all your help.
Where do you get prosthetic fingers, we may have to get you some

gstewart44 · « **Reply #3 on:** February 13, 2010, 08:15:37 AM »

Many Thanks Tim,

I never would have gotten my Handi 243 shooting straight without the FAQ's and all the knowledge you have shared and also catalogued from others. Keep on going.

quickdtoo · « **Reply #4 on:** February 13, 2010, 08:30:21 AM »

Thanks Don and everyone, it's great to be able to contribute to a wonderful site like this.

Tim

FLNT4EVR · « **Reply #5 on:** February 13, 2010, 11:05:06 AM »

30,000 Posts, good lord. I should live so long. Congrats Tim. We have all benefited from your vast and Handi knowledge.

fredster22 · « **Reply #6 on:** February 13, 2010, 11:34:08 AM »

Congrats Tim , and thanks for your dedication, you certainly have given new meaning to the words" let your fingers do the
walking" with both knowledge and generosity offered to all. Fred

blacksan · « **Reply #7 on:** February 13, 2010, 11:38:51 AM »

I pity the fool that under appreciates Mr T..........

dw06 · « **Reply #8 on:** February 13, 2010, 12:02:19 PM »

Congrats Tim!! So many things to thank you for, Thanks for the help you've given to me,Thanks for the answered PMs,Thanks for all the shared information in all your post,Thanks for making G.B.O. what it is. So you just know whats coming!

We love you man

Congrats buddy!!

Rustyinfla · « **Reply #9 on:** February 13, 2010, 01:21:33 PM »

I think we should double his pay!

quickdtoo · « **Reply #10 on:** February 13, 2010, 01:25:06 PM »

Yup, I'd go for that!!!

Thanks fellas.

Tim

MSP Ret · « **Reply #11 on:** February 13, 2010, 01:29:03 PM »

Congratulations Tim, and thanks for the memories. Remember, if they double your pay, the administration in Washington will most likely count that as another job created by the stimulus....<><....

original · « **Reply #12 on:** February 13, 2010, 02:01:16 PM »

congrats and thanks for all the great info.

rdb · « **Reply #13 on:** February 13, 2010, 02:16:07 PM »

Thank you Tim, for sharing all your wisdom.

jeepmann1948 · « **Reply #14 on:** February 13, 2010, 02:21:41 PM »

Tim Thanks a bunch !!!!!!!!!!!!!!!!!!
If you answer all the thank you messages you will be well on the way to 31,000

S.E.Ak · « **Reply #15 on:** February 13, 2010, 02:34:59 PM »

Thanks for sharing in many areas

jather · « **Reply #16 on:** February 13, 2010, 03:26:48 PM »

KUDOS, TIM!!!!!!!!! jather...

briannmilewis · « **Reply #17 on:** February 13, 2010, 07:14:02 PM »

Let's see...this will be my 432 post in about 15 months, so at this rate, 28.8 posts per month, it will be another 1026 months for me to reach 30,000, and that would make me 141 years old!

Holy crap, that really puts Tim's accomplishment in perspective.

Long live The Tim!

tallyho · « **Reply #18 on:** February 13, 2010, 09:49:23 PM »

Tim,
I hope you are still here on GBO at 141 yrs old.

And I hope too, that I am here to enjoy it!

LaOtto222 · « **Reply #19 on:** February 14, 2010, 12:03:55 AM »

With out a doubt, Tim has promoted Handi rifles far beyond what anyone else has...any where. That is plenty for anyone, but beyond that; Tim is such a good guy too, I sure would like him to be a close neighbor. Thank You Tim

bilmac · « **Reply #20 on:** February 14, 2010, 02:13:04 AM »

You have helped me enjoy another kind of rifle.

Lucky Joe · « **Reply #21 on:** February 14, 2010, 02:22:39 AM »

Thanks for all you have done Tim. I've always enjoyed these guns, you've helped to make them real and handier.

tcr44 · « **Reply #22 on:** February 14, 2010, 03:25:02 AM »

Thank you Tim, from Nova Scotia Canada. Dave

Big Blue · « **Reply #23 on:** February 14, 2010, 03:21:44 PM »

Tim,
I was just reading through the first 25 pages of posts on this forum and ran into the one where you said you didn't do enough shooting to warrant getting into reloading. A few short pages later and you were asking what type of oil to use as a dampening agent for your scale. My how things have changed. LOL!!!
Don

rdlange · « **Reply #24 on:** February 14, 2010, 03:26:34 PM »

Thanks from a newbie too. Already saved me some cash and helped me get closer to what I need. I'll be back to share when I have it.

Be Well...

quickdtoo · « **Reply #25 on:** February 14, 2010, 04:14:11 PM »

Quote from: Big Blue on February 14, 2010, 03:21:44 PM

Tim,
I was just reading through the first 25 pages of posts on this forum and ran into the one where you said you didn't do enough shooting to warrant getting into reloading. A few short pages later and you were asking what type of oil to use as a dampening agent for your scale. My how things have changed. LOL!!!
Don

Yup, I remember typing that, now I've gone full circle and am back not shooting much again!!

Tim

ro · « **Reply #26 on:** February 14, 2010, 07:26:35 PM »

another thanks Tim, I read more than I post and have learned alot from your post and this site about handi-rifles, just wondering how many computers and hard drives you have been threw in the past 30,000 posts here and other sites, just kidding, thanks for all the good info., ro

petemi · « **Reply #27 on:** February 15, 2010, 03:39:28 AM »

Again,.....and again.....Thank You Sir

Pete

AtlLaw · « **Reply #28 on:** February 15, 2010, 03:44:49 AM »

Quote from: petemi on February 15, 2010, 03:39:28 AM

Again,.....and again.....Thank You Sir

And again!

Especially for all the one-on-one help you so willingly give so many folk!

We love you man!

Doublebass73 · « **Reply #29 on:** February 15, 2010, 05:41:15 AM »

Thank you Tim!