« previous next »
Pages: [1]   Go Down

Author Topic: 600 lever action round  (Read 1345 times)

0 Members and 1 Guest are viewing this topic.

Offline eagles

  • Trade Count: (0)
  • Posts: 3
600 lever action round
« on: March 06, 2010, 12:22:50 PM »
I am trying to figure out if  round can be made in 60 caliber for one of the  modern steel large frame Wincester lever actions like the model 71 . I have one in 50-110. My question is can  I blow out a 50-110 case to hold a 60 caliber round ?  Has any one else made a short 60 caliber case  that  LOADED the round is  a Max oal of 2.75 maybe 2.8 ? Could the 600 nitro be shortened and would that be bettter ?  I believe that is also a straight case ?  Also how hard is it to get 60 caliber rifle barrels and where might a good source be ?  My Lever action Gunsmith was not sure you can legaly get them but I reminded him they are making the 600 over kill and even the 700 here so the barrels are available .Thank you . my direct email is willsanders@earthlink.net
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: 600 lever action round
« Reply #1 on: March 07, 2010, 09:14:57 AM »
Sorry, 50 is about as big as it will handle. The rim on a 600ne is about as wide as the action on the rifle. But a 50-110 with modern brass and smokeless powder is no slouch anyhow!
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline eagles

  • Trade Count: (0)
  • Posts: 3
Re: 600 lever action round
« Reply #2 on: March 07, 2010, 09:39:44 AM »
Thanks , I agree on the 50-110 as I have one . The 60 is just an idea , if it can be done I woud not mind trying it . My Gunsmith thinks a 50-110 case can be blown out or , I think he mentioned another round as well that may work , I think he said a 577 Snyder .
Logged

Offline eagles

  • Trade Count: (0)
  • Posts: 3
Re: 600 lever action round
« Reply #3 on: March 08, 2010, 11:32:05 AM »
Snyder wont work and the 6o does not leave e nough steel for a high power load so I am thining of 55 caliber , a short 550 magnum or again using the 50-110 case but then the claiber may be larger than the base !
Logged

Offline mrussel

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 838
Re: 600 lever action round
« Reply #4 on: July 05, 2010, 08:51:55 PM »
Quote from: eagles on March 06, 2010, 12:22:50 PM
I am trying to figure out if  round can be made in 60 caliber for one of the  modern steel large frame Wincester lever actions like the model 71 . I have one in 50-110. My question is can  I blow out a 50-110 case to hold a 60 caliber round ?  Has any one else made a short 60 caliber case  that  LOADED the round is  a Max oal of 2.75 maybe 2.8 ? Could the 600 nitro be shortened and would that be bettter ?  I believe that is also a straight case ?  Also how hard is it to get 60 caliber rifle barrels and where might a good source be ?  My Lever action Gunsmith was not sure you can legaly get them but I reminded him they are making the 600 over kill and even the 700 here so the barrels are available .Thank you . my direct email is willsanders@earthlink.net

 Doesnt that require the whole tax stamp thing? I thought the largest you could do was 50 without it being a "destructive device",or are you not in the US?
Logged

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: 600 lever action round
« Reply #5 on: July 06, 2010, 07:33:55 AM »
I'm thinking over 50 is a destructive device and you have to get a tax stamp. Hubel gets away with his monster guns because they are rifled shotguns.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: 600 lever action round
« Reply #6 on: July 06, 2010, 07:28:10 PM »
Nope. ATF exempts sporting rounds. You can check with them and get a ruling on their website.


Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: 600 lever action round
« Reply #7 on: July 06, 2010, 07:38:43 PM »
What about making a 20 ga rifle.
Use brass shells and load the bullets out.
Not sure if they will fit width wise. 
But I think this is what you were intending to make.
Logged

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: 600 lever action round
« Reply #8 on: July 08, 2010, 02:55:47 AM »
Ya know, if you had to have a big lever gun there is always the 70-150. Start with a Winchester 1887 12 guage, fit it with a rifled barrel, and make cases from brass 12ga. shells. Why they didn't just leave it straight at 73 caliber I'll never know but it does work and is big. I think one of those would be a lot of fun for close up hunting in tight woods. Plus you get to look like the Terminator.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: 600 lever action round
« Reply #9 on: July 08, 2010, 05:15:05 AM »
The 70-150 would work with an 1887 action.
Could also be necked to .600
Logged
Pages: [1]   Go Up
« previous next »