Author Topic: Great load for the 45/70 BC  (Read 867 times)

0 Members and 1 Guest are viewing this topic.

Offline rsl

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 195
Great load for the 45/70 BC
« on: March 12, 2010, 04:42:52 PM »
My day for Range Officer duty.. Worked the 50 yard. Loaded up some 300 grain lead flat point  bullets in front of 35 grains of 3031.. This is a Trapdoor load I found in the little Yellow book on the 45/70 printed by Guns & Ammo in 1973..  "Guns & Ammo Mini Manual" Get one if you can find it.. Found mine on E-Bay.. This is a very accurate load with little recoil..

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Re: Great load for the 45/70 BC
« Reply #1 on: March 13, 2010, 02:50:04 PM »
Velocity?

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Great load for the 45/70 BC
« Reply #2 on: March 14, 2010, 06:27:42 AM »
You might also try any under 500gr. cast lead bullet over 13.0 gr. Unique for plinking and see what you think. It has worked well in quite a few. The Lee moulds in the 340 and 405 gr. weight are good choices.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline rsl

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 195
Re: Great load for the 45/70 BC
« Reply #3 on: March 14, 2010, 12:14:22 PM »
Don't know about velocity.. Would say in the 1200 FPS range.. Went right through a 5" thick phone book at about 60 yards.

Offline blacksan

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 112
Re: Great load for the 45/70 BC
« Reply #4 on: March 14, 2010, 03:39:21 PM »
I like 3031 with lead pills in the 45-70 too.

Offline Bladeforger

  • GBO Supporter
  • Trade Count: (3)
  • Member
  • *****
  • Posts: 81
Re: Great load for the 45/70 BC
« Reply #5 on: March 15, 2010, 05:35:05 PM »
28 grains of IMR 4198 with any old lead pill (Remember that heavier bullets = more muzzle velocity in the .45-70.  That's just opposite of most metallic cartridges.)

Also, saw in Handloader that Trail Boss ought to make up some lighter-than-full-velocity loads.  Good article.  Gotta try some.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Great load for the 45/70 BC
« Reply #6 on: March 15, 2010, 06:06:13 PM »
28 grains of IMR 4198 with any old lead pill (Remember that heavier bullets = more muzzle velocity in the .45-70.  That's just opposite of most metallic cartridges.)

Also, saw in Handloader that Trail Boss ought to make up some lighter-than-full-velocity loads.  Good article.  Gotta try some.


I have recently loaded some 45-70 loads using 12grs of TB and a 330gr lead HP bullet. A load of fun!!!!!!!!

TB is the way to go, I really like it.

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline rsl

  • Trade Count: (8)
  • Avid Poster
  • **
  • Posts: 195
Re: Great load for the 45/70 BC
« Reply #7 on: March 15, 2010, 06:17:51 PM »
Gonna try the Trail Boss load.. thanks Dinny

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Great load for the 45/70 BC
« Reply #8 on: March 15, 2010, 06:20:09 PM »
Gonna try the Trail Boss load.. thanks Dinny

You'll like it. Skiforce shot mine this last weekend and was shocked at the light recoil and high fun factor. I have him hooked on a 45-70 Handi now.  ;D

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: Great load for the 45/70 BC
« Reply #9 on: March 16, 2010, 10:06:25 AM »
Gonna try the Trail Boss load.. thanks Dinny

You'll like it. Skiforce shot mine this last weekend and was shocked at the light recoil and high fun factor. I have him hooked on a 45-70 Handi now.  ;D

Thanks, Dinny

As opposed to some of my bruiser loads ehh ;)

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Great load for the 45/70 BC
« Reply #10 on: March 16, 2010, 02:51:55 PM »
Gonna try the Trail Boss load.. thanks Dinny

You'll like it. Skiforce shot mine this last weekend and was shocked at the light recoil and high fun factor. I have him hooked on a 45-70 Handi now.  ;D

Thanks, Dinny

As opposed to some of my bruiser loads ehh ;)

Mac

Polar opposites!  :o :o
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Great load for the 45/70 BC
« Reply #11 on: March 17, 2010, 04:51:14 AM »
Been experimenting with TB in a .444 with whatever plated .44 pistol bullets are laying around. Using a Lee scoop that throws 11.9-12.1 grains (2.8cc? maybe?) Pure plinking fun. Cheaper than 45-70 since I don't cast.  Easy on brass since I don't bell the case. Imagine it is a similar boom for the buck.

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: Great load for the 45/70 BC
« Reply #12 on: March 17, 2010, 05:37:45 AM »


While not specifically for the BC..but any 45-70...this is something I would like to try for a plinking load..

http://www.castpics.net/memberarticles/Round%20Ball%20Loads...Final%20edit.htm

Seems like it would be interesting.

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Great load for the 45/70 BC
« Reply #13 on: March 17, 2010, 06:30:46 AM »
Ive done a fair bit of this, in a number of calibers, but my method is a little different. He likes to 'bump' the ball up, and I prefer to use one a little oversize and size it down to have a 'shank' all around that fits firmly into a fully expanded, fire-formed case neck. BTW, this is basically what happens when you load the right sized ball into a cap & ball revolver.
His recommendation of a light load to drive them is valid, however, I dont find them troublesome to make but really easy. Decap/recap, throw the charge, thumb press in the prepped ball flush and smear some softish lube over the mouth. Good to go. Other than the mentioned change in POI they are quite accurate.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Great load for the 45/70 BC
« Reply #14 on: March 17, 2010, 07:05:21 AM »
"Always do right, this will gratify some and astonish the rest" -  Mark Twain