Author Topic: 45LC/410 Contender or Encore Question  (Read 1181 times)

0 Members and 3 Guests are viewing this topic.

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
45LC/410 Contender or Encore Question
« on: April 10, 2010, 02:34:48 PM »
For those of you that own a Contender or Encore with a 45LC/410 barrel. How accurate does the 45 LC shoot from a chamber that's 3 inches long ? I'm thinking of owning one of these but if the 45's don't shoot good too then I don't need it.  Thanks.
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline jjvw

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 136
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #1 on: April 10, 2010, 08:12:09 PM »
Depends what you call good. For target accuracy, I use the 45 in full length 9.74 brass. they last forever and when loaded with shot, are great for small game.
I have been a lost child most of my life. 
Since being born in a log cabin that I built with my own hands, it has been an uphill struggle all the way.  Being so devastatingly handsome, intelligent,  rich-beyond-belief, and humble have all worked together to shape me and my destinies.

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
Re: 45LC/410 Contender or Encore Question
« Reply #2 on: April 11, 2010, 02:52:33 AM »
Straight 45 barrels are harder to find, but they shoot 45s much better than a 410/45. Sometimes confused with the 410 barrel is the 'hotshot' barrel. It has a 45 only chamber, but has a screw-in choke for the obsolete 45 hotshot cartridge.
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline DEACONLLB

  • GBO Supporter
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 2458
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #3 on: April 11, 2010, 03:12:56 AM »
I have a super 14 stainless with vent rib and have owned a 10 inch with rib and i found the barrel to be good with 410 shell but not so good with the 45 because of the long jump and had wondered about loading it up with longer cases. there is a brand of 410 out of russia that uses brass cases and have wondered if they were strong enough to be used as a 45 cal.
Deaconllb
Korean war vet. NRA Member
Fourth fighter wing K14 Kimpo Korea 1952 Fourth but first, the mig killers.
533rd material ,air defense Oxnard AFB 1953-1955
Pastor of the  CBCG-Fellowship group Tulsa Oklahoma.

Offline P.A. Myers

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1344
Re: 45LC/410 Contender or Encore Question
« Reply #4 on: April 11, 2010, 03:36:15 AM »
I do know that 410s operate at much lower pressures than even the standard 45colt loading. Might have crimp problems too. Sounds like fun with a touch of danger.
“Never give in, never give in, never; never; never; never - in nothing, great or small, large or petty -
never give in except to convictions of honor and good sense”
 Winston Churchill

Offline kynardsj

  • GBO Supporter
  • Trade Count: (54)
  • Senior Member
  • *****
  • Posts: 1680
  • Gender: Male
  • Sweet Home Alabama
Re: 45LC/410 Contender or Encore Question
« Reply #5 on: April 11, 2010, 04:00:33 AM »
Also if memory serves me correct a 410 shotgun shell has a diameter of .410. A 45 slug just ain't gonna fit in one.
When you were born, you cried and the world rejoiced. Live your life so that when you die the world cries and you rejoice.

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #6 on: April 11, 2010, 05:14:04 AM »
The bores are .45 caliber, so it really is the .410 which doesn't fit. If you look at wads fired from one you will often find the cup or flang at he bottom of the wad has rolled up around the base in attempting to fill the .042" oversize bore. I have a lot of fun and bag small game with my .410 pistols and have no desire to shoot .45 Colts out of them, for that I perfer a revolver.
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline bojack

  • Trade Count: (0)
  • Posts: 3
Re: 45LC/410 Contender or Encore Question
« Reply #7 on: April 18, 2010, 02:02:37 AM »
are 410 slugs accurate in them?

Offline TCU SHOOTER

  • Trade Count: (7)
  • Member
  • *
  • Posts: 33
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #8 on: April 26, 2010, 07:50:26 AM »
are 410 slugs accurate in them?
bojack: I would say no especially beyond 25 yards. The 410 wad is just to small to realy inguage the rifling. Give it a try and I am quite sure you won't want to wast you money after a few shots.

Offline jjvw

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 136
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #9 on: April 27, 2010, 08:57:43 PM »
I've had a 45/410 since they came out in the 80's. If you buy one to shoot as a 410, you will be very happy with it. If you want to use it primarily as a 45, you will be disappointed. It will shoot the slugs ok, (killed a 125# boar shot between the eyes at 50 feet) but the slug is very light weight and loses what little energy it has very fast.  The sights are the weak link. The bead sight on the vent rib is not adjustable and are designed for shot.
 9.3x74R brass with .45 bullets could be good enough for deer to 100yds. They would be ideal for a combo small game hunt with the possibility of larger game. Use caution, a full house load is not suitable for a contender.
I have been a lost child most of my life. 
Since being born in a log cabin that I built with my own hands, it has been an uphill struggle all the way.  Being so devastatingly handsome, intelligent,  rich-beyond-belief, and humble have all worked together to shape me and my destinies.

Offline Bill,SC

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 225
  • Gender: Male
Re: 45LC/410 Contender or Encore Question
« Reply #10 on: April 28, 2010, 08:08:33 AM »
The 45-410 barrels have been on the market since 1968.  The 410 can be used for clays, for small game, and rat control.  Know the limitations and it will work for you.  I will admit it does not work for squirrel hunting very well.  I have not been disappointed for the last 42 years.
Hunt Smart, Hunt Safe, Hunter Education