Author Topic: Pardner .410 question  (Read 994 times)

0 Members and 1 Guest are viewing this topic.

Offline beadhead

  • Trade Count: (0)
  • Posts: 4
Pardner .410 question
« on: May 15, 2010, 09:19:04 AM »
Hi All,

Great forum!

I have a Pardner .410 with a serial number CAC 055375.  I'd like to order a 28 gauge barrel and a 20 gauge Tracker II slug barrel.  However, H&R's website is vague as to whether I can do this:

At the top of the barrel accessory program page, it says "Additional barrels may be added to firearms of our manufacture since 1987 only, with a serial number that begins with N or H. We do not install additional barrels on any other manufacturer’s firearms. "

Then under the additional shotgun barrels section, it says, "All model SB2 Handi-Rifles™ and model SB1 Pardner® shotguns can be fitted with any shotgun barrel except the 10 gauge."

I checked the FAQ's on GBO and it says, "Y=2008 serial number prefixes changed in May 2008, CBA for SB2 and CAC for SB1."  So I take I have shotgun that was manufactured during or after May 2008.

The question:  can I purchase additional shotgun barrels from H&R for this firearm or not?

Thanks.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Pardner .410 question
« Reply #1 on: May 15, 2010, 09:25:53 AM »
Welcome! Yes....if they have em in stock, best to call and ask, toll free (866)776-9292.   :-\

H&R is real bad about updating their website, our FAQs and Help has better information.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline beadhead

  • Trade Count: (0)
  • Posts: 4
Re: Pardner .410 question
« Reply #2 on: May 15, 2010, 09:54:03 AM »
Thanks much for the quick response.  I'll give them a call Monday.

Cheers,
Jim

Offline beadhead

  • Trade Count: (0)
  • Posts: 4
Re: Pardner .410 question
« Reply #3 on: May 20, 2010, 08:55:41 AM »
So I called H&R on Monday.  Both the 28 gauge smoothbore and 20 gauge tracker II barrels are out of stock.  I'll call again in a month.

Cheers,
Jim

Offline born-to-hunt

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 269
  • Gender: Male
  • .:Hunter:.
Re: Pardner .410 question
« Reply #4 on: May 20, 2010, 05:44:26 PM »
What if I have a 20ga youth model pardner and I wanted a .410 same rules apply?
Look a distraction!!!

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Pardner .410 question
« Reply #5 on: May 20, 2010, 07:14:36 PM »
What if I have a 20ga youth model pardner and I wanted a .410 same rules apply?

Yes, as long as your frame was made after 1987 H&R will fit your frame with any shotgun barrel they have listed on their website except for the 10 gauge.
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline born-to-hunt

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 269
  • Gender: Male
  • .:Hunter:.
Re: Pardner .410 question
« Reply #6 on: May 21, 2010, 09:02:20 AM »
What if I have a 20ga youth model pardner and I wanted a .410 same rules apply?

Yes, as long as your frame was made after 1987 H&R will fit your frame with any shotgun barrel they have listed on their website except for the 10 gauge.

cool cause I want to get a 12ga rifled barrel and a .410 barrel for my sis

Thanx
Look a distraction!!!