« previous next »
Pages: [1]   Go Down

Author Topic: 12 Gauge Pardner  (Read 1519 times)

0 Members and 1 Guest are viewing this topic.

Offline JRW209

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
12 Gauge Pardner
« on: May 21, 2010, 02:45:17 PM »
My 12 Gauge Pardner was given to me as a present after the owner caught me admiring it one day. Its a sweet little gun, nice to carry but I figured it wouldn't be so nice on the shoulder so I got a grind to fit recoil pad and its just fine. Definitely kicks more than my Auto but its not too bad. So fast forward to Monday and i ordered a new Pardner in 20. I can hardly wait untill the 28th to get it out of jail.
Logged

Offline scout4

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 584
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #1 on: May 21, 2010, 03:31:33 PM »
Hey JRW209, Thats a dandy lookin old H&R! I like that. Got my son a newer version of this gun, guess you could say its same thing only different. I like the older models with the forend stock like your's and the color case receiver. Nice old gun you have. scout4<><
Logged

Offline born-to-hunt

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 269
  • Gender: Male
  • .:Hunter:.
Re: 12 Gauge Pardner
« Reply #2 on: May 21, 2010, 03:41:25 PM »
Nice lookin gun is it rifled or smooth?
Logged
Look a distraction!!!

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #3 on: May 21, 2010, 04:23:12 PM »
I love scnable forends and I especially like the shell holder. Did you make that or order it from some where? If you like the 12 your gunna love the 20.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #4 on: May 21, 2010, 06:02:25 PM »
Nice pardner and I too love the shell holder. What barrel length is it? looks longer than the norm, 32' FULL perhaps?



-Aaron
Logged

Offline bobg

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1555
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #5 on: May 22, 2010, 01:28:22 AM »
  It seems like everyone has a 12 or a 20. Maybe we can get spikehorn to tell us about his 28 gauge. Have you hunted with it at all since you picked it up? I killed a squirrel or two with it when i had it.
                     bobg
Logged

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #6 on: May 22, 2010, 06:24:03 AM »
Hey bob how ya doin? I'll start another thread about the 28ga this afternoon when I get to work.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline JRW209

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #7 on: May 22, 2010, 06:58:43 AM »
Thanks guys. It's a 28" fixed mod. smooth barrel. I made the shell holder. The only thing i've hunted with it so far is clays.
Logged

Offline JRW209

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #8 on: May 22, 2010, 07:01:39 AM »
Quote from: bobg on May 22, 2010, 01:28:22 AM
  Have you hunted with it at all since you picked it up? I killed a squirrel or two with it when i had it.
                     bobg

I'm a little confused Bob :)
Logged

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #9 on: May 22, 2010, 08:26:54 AM »
Quote from: JRW209 on May 22, 2010, 07:01:39 AM
Quote from: bobg on May 22, 2010, 01:28:22 AM
  Have you hunted with it at all since you picked it up? I killed a squirrel or two with it when i had it.
                     bobg

I'm a little confused Bob :)
He's talking about the 28ga I bought from him.
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline JRW209

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 106
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #10 on: May 22, 2010, 08:51:59 AM »
Ok I get it now ;D
Logged

Offline dogtagg88

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
  • don't fire until you see the whites of their eyes
Re: 12 Gauge Pardner
« Reply #11 on: May 23, 2010, 08:14:39 AM »
I have one just like it!  I have killed more game with it than any of my fancy autos, pumps, rifles, not because it's a better gun, just because it's always with me!  A neighbor of mine found it in his attic when he moved in, his wife didn't want a gun in the house, so he gave it to me...DT
Logged
Topper 12,16,410  TrackerI 20ga  Handi Rifle 30-30

Offline dogtagg88

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
  • don't fire until you see the whites of their eyes
Re: 12 Gauge Pardner
« Reply #12 on: May 23, 2010, 08:21:33 AM »
BTW mine likes 3" 000 buckshot for deer to 35 40 yards, dead right there...#5 23/4" has downed several turkeys out to 35 yards...i keep a mix of those in my shell holder and a box of 6 shot in the truck for anything else...good luck with it...DT
Logged
Topper 12,16,410  TrackerI 20ga  Handi Rifle 30-30

Offline mrussel

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 838
Re: 12 Gauge Pardner
« Reply #13 on: May 23, 2010, 07:06:34 PM »
Quote from: JRW209 on May 21, 2010, 02:45:17 PM
My 12 Gauge Pardner was given to me as a present after the owner caught me admiring it one day. Its a sweet little gun, nice to carry but I figured it wouldn't be so nice on the shoulder so I got a grind to fit recoil pad and its just fine. Definitely kicks more than my Auto but its not too bad. So fast forward to Monday and i ordered a new Pardner in 20. I can hardly wait untill the 28th to get it out of jail.

 Congrats. Thats a nice gift. I have a 20 buck Winchester branded LimbSaver recoil pad on mine from Walmart and it makes all the difference. If you ever want to feel a few good bruises followed by some deep shoulder pain that makes you worry if you will be spending the evening in the emergency room though,take the pad off,ignore the pain and fire a few boxes of 3" 00 buck through it. (I speak from experience) Ive been thinking about ordering the 410/45LC barrel for mine. I have a tracker II slug barrel for mine as well. Does anyone have any information on a way to mount a scope on it?
Logged

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #14 on: May 24, 2010, 06:42:44 AM »
I bought a 12ga Tracker II barrel from MSPRet It appears to drilled & tapped and epoxied, He told me when I bought it that it was permanently attached.  Other people have gotten steel bases from Warne and had them silver soldered.  I think there is some stuff about this in the FAQs
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #15 on: May 24, 2010, 08:10:35 AM »
There is not much meat to work with when drilling and tapping a 12 gauge barrel, that is why most gunsmiths prefer not to do it. When mie used to do it he advised me that the scope base was meant to remain on the 12 gauge barrel once it was attcahed and not to remove and replace it like other rifle barrels or 20 gauge barrels where there is more barrel thickness to work with....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #16 on: May 24, 2010, 08:47:21 AM »
I was thinking about doing this with an AR picitiny rail, though I have had a hard time finding a steel one :-\
Know where I can find a steel picitiny rail?
Logged

Offline mrussel

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 838
Re: 12 Gauge Pardner
« Reply #17 on: May 30, 2010, 06:59:25 PM »
I was thinking that I could throw a piece of steel on the lathe and bore it out to the same diameter as the barrel,then cut a section out on the bandsaw, mill the top flat and drill holes to mount a rail too it. I would then silver solder that on to it and would have plenty of metal to screw into.
Logged

Offline TxGun

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 131
  • Gender: Male
  • Retired
Re: 12 Gauge Pardner
« Reply #18 on: May 30, 2010, 08:46:08 PM »
Quote from: myarmor on May 24, 2010, 08:47:21 AM
I was thinking about doing this with an AR picitiny rail, though I have had a hard time finding a steel one :-\
Know where I can find a steel picitiny rail?


Midway has them. Little pricey.

http://www.midwayusa.com/viewProduct/?productNumber=826033
Logged

Offline Airsporter

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 893
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #19 on: May 30, 2010, 11:52:42 PM »
Brownells sells 10" long base stock.  I think it has a flat base, so you would have to radius the bottom.

http://www.brownells.com/.aspx/pid=8804/Product/PICATINNY_BASE_STOCK
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 12 Gauge Pardner
« Reply #20 on: May 31, 2010, 02:50:27 PM »
Or just silver solder a Warne steel pitcatinny base(<$40) to the barrel as is, it's made to fit the standard contour H&R chambers, I'd add one 8-40 screw as a recoil lug, although it probably wouldn't need it.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »