« previous next »
Pages: [1]   Go Down

Author Topic: New Model Blackhawk 41 Mag Grips  (Read 1893 times)

0 Members and 1 Guest are viewing this topic.

Offline GMHNTR

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
  • Gender: Male
New Model Blackhawk 41 Mag Grips
« on: July 08, 2010, 07:59:41 AM »
Recently purchased Ruger New Model 41 Mag and it has the internal safety. Tried to fit some Hogue grips and had some issues not fitting correctly. Does anyone have some info where I can purchase grips for the newly incorporated Ruger Model Blackhawks
Logged

Offline nicholst55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: New Model Blackhawk 41 Mag Grips
« Reply #1 on: July 09, 2010, 08:42:13 PM »
Many of the aftermarket grip manufacturers are now selling grips with a cut for the Ruger internal safety.  Depending on how much you want to spend, take a look at CLC Grips.  Also, there are several other members at the Ruger Forum (.com, not .net) who make grips.
Logged


"I don't think we're in Kansas any more, Toto!"  Dorothy, in 'The Wizard of Oz.'

Offline Duke0313

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • I am the way, the truth, and the life. -John 14:6
Re: New Model Blackhawk 41 Mag Grips
« Reply #2 on: July 11, 2010, 11:15:14 PM »
CLC makes the nicest grips I've ever seen, but if you're looking to spend a little less, then Gunbroker.com always has some nice grips available. I just recently used that site to purchase some real stag grips that look GREAT on my .41 mag Blackhawk! Also purchased a stainless steel grip frame and stainless steel base pin. Put 'em all together and my Blackhawk really looks special.
Logged
"Republic:  I like the sound of the word -- means people can live free, talk free, go or come, buy or sell, however they choose.  Some words give you a deep feeling.  Republic is one of those words that makes me tight in the throat. -John Wayne- The Alamo

Offline BlkHawk73

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1501
  • Gender: Male
Re: New Model Blackhawk 41 Mag Grips
« Reply #3 on: July 12, 2010, 04:31:26 AM »
  Klamath River Woodworking makes beautiful grips.  Also check the items that 41 magnum and Pvt Shultz offers on Ruger Forum. 
Logged
"Never Surrender, Just Carry On."  - G.S.

Offline nicholst55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 127
  • Gender: Male
Re: New Model Blackhawk 41 Mag Grips
« Reply #4 on: July 17, 2010, 08:15:49 PM »
Quote from: BlkHawk73 on July 12, 2010, 04:31:26 AM
  Also check the items that 41 magnum and Pvt Shultz offers on Ruger Forum. 

They're two of the folks that I was referring to earlier.
Logged


"I don't think we're in Kansas any more, Toto!"  Dorothy, in 'The Wizard of Oz.'

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: New Model Blackhawk 41 Mag Grips
« Reply #5 on: July 18, 2010, 07:24:39 AM »
What is an "internal saftey"?  I guess you aren't referring to the transfer bar if it causes a conflict with grip fit.  I have a NM Blackhawk in 41M that I ordered new about 8 years ago and it wears a one piece Hogue mono-grip on it that I installed without issue. 
Logged

Offline caryc

  • Trade Count: (0)
  • Posts: 2
Re: New Model Blackhawk 41 Mag Grips
« Reply #6 on: July 18, 2010, 09:24:25 PM »
Quote from: Luckyducker on July 18, 2010, 07:24:39 AM
What is an "internal saftey"?  I guess you aren't referring to the transfer bar if it causes a conflict with grip fit.  I have a NM Blackhawk in 41M that I ordered new about 8 years ago and it wears a one piece Hogue mono-grip on it that I installed without issue.  

It's not an internal safety.  They're talking about the internal lock in the new Ruger grip frames.  It locks with a key to keep the hammer from being cocked.

The lock only interferes with grips on the New XR3 grip frame since the locks are wider than the grip frame.  The guns that still have the XR3-RED style grip frames with locks have no problem since they are wider than the locks.
Logged

Offline shooter6br

  • Trade Count: (0)
  • Member
  • *
  • Posts: 93
  • "Keep up the good fight"God bless America
Re: New Model Blackhawk 41 Mag Grips
« Reply #7 on: July 27, 2010, 05:42:09 AM »
For practical use I love the Hogue rubber grips. Have them on my Single Six, SP 101,S&W 657,i have lare hands so it is a nice fit. $15 at Midsouth
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: New Model Blackhawk 41 Mag Grips
« Reply #8 on: July 27, 2010, 03:54:41 PM »
Quote from: GMHNTR on July 08, 2010, 07:59:41 AM
Recently purchased Ruger New Model 41 Mag and it has the internal safety. Tried to fit some Hogue grips and had some issues not fitting correctly. Does anyone have some info where I can purchase grips for the newly incorporated Ruger Model Blackhawks

I feel your pain.  I tried to do the hogue grips and it gouged up my frame some.  Luckily the damage isn't really visible with grips in place.  I haven't really found any that sing to me that will work on the Locking NMB.  The guy at Badger said he had some that might work, then replied he only stocked what was on the site.  8(  I may check out the ruger forum guys as well.
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline 41 magnum

  • Trade Count: (28)
  • Avid Poster
  • **
  • Posts: 220
  • Gender: Male
Re: New Model Blackhawk 41 Mag Grips
« Reply #9 on: August 07, 2010, 12:32:29 PM »
I swapped out the original grip frame for a SB and put Pachmayrs on it, and it fits my long hands better
Logged
THE 10 COMMANDMENTS ARE NOT SUGGESTIONS

Maker of trappers tools and gear, have an idea?  Let's talk !

Offline flatgate

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
Re: New Model Blackhawk 41 Mag Grips
« Reply #10 on: August 08, 2010, 04:53:25 AM »
There shouldn't be any clearance issues between the new fangled lock assembly and the grip panels on a .41 mag. Blackhawk unless the gun is a Flattop.  In that case the lock is a wee bit wider than the grip fame which then requires a small relief cut on each grip panel.

Here's a pic of the lock assembly as installed on the steel XR-3 grip frames utilized on the New Vaqueros and the new Flattops.



flatgate
Logged
Pages: [1]   Go Up
« previous next »