Author Topic: .45/.410 Super 16  (Read 865 times)

0 Members and 1 Guest are viewing this topic.

Offline hendog

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 129
.45/.410 Super 16
« on: August 11, 2010, 08:44:10 AM »
I have a carbine with the 16" 45/410 barrel & choate survival stock I call my mini-me gun because it fits perfectly in the extra barrel secton of my case. It's a great set up for hunting here in western washington. I have my 7x30 waters carbine ready to go & if I see a grouse I have fast access to my .410.

I also orderd some williams fire sites that attach to the rib to try some Bitteroot .45LC bear loads & .410 slugs. I am hoping to find a load to at least be papper plate MOA @ 50 yards.      

Offline 3leggedturtle

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 209
  • Gender: Male
Re: 45/.410 Mini-me
« Reply #1 on: August 12, 2010, 08:47:02 PM »
Have you patterned the 410 shells yet, Ed's TC has one, keep thinking about. Got any pics??

Offline hendog

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 129
Re: 45/.410 Mini-me
« Reply #2 on: August 12, 2010, 09:11:26 PM »
Have you patterned the 410 shells yet, Ed's TC has one, keep thinking about. Got any pics??

I did pattern it with 3" #5's & #7 1/2 @ 20 yds. The #5's had a hole in the middle a Rooster could fly though. The 7 1/2's did a lot better. I dont have a pic, but with the survival stock its only 30" long. 

Offline hendog

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 129
Re: 45/.410 Mini-me
« Reply #3 on: August 27, 2010, 03:13:33 PM »
"I also orderd some williams fire sites that attach to the rib to try some Bitteroot .45LC bear loads"

I tried the .45LC bear loads today & was able to hit a 3" orange target dot every shot @ 25yrds. I plan on using this set up for grouse, but if i see a bear close up, I will unscrew choke tube and shoot with 45LC.

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: 45/.410 Mini-me
« Reply #4 on: August 27, 2010, 03:59:09 PM »
"I also orderd some williams fire sites that attach to the rib to try some Bitteroot .45LC bear loads"

I tried the .45LC bear loads today & was able to hit a 3" orange target dot every shot @ 25yrds. I plan on using this set up for grouse, but if i see a bear close up, I will unscrew choke tube and shoot with 45LC.

How close will that bear be after changing ammo and unscrewing the choke?
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline hendog

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 129
Re: 45/.410 Mini-me
« Reply #5 on: September 16, 2010, 12:35:20 PM »

How close will that bear be after changing ammo and unscrewing the choke?
[/quote]

I found a .410 quick change tube wrench used for sporting clays and attached to stock with parachute cord. Takes about 30 seconds to change over.

I now am getting 1" groups @ 25 yards & not much bigger @ 50 yards with the Bitterroot bear loads. This may be my new Elk/deer in the Timber gun. The big 300gr JHP is going over 1300fps from the 16" carbine barrel. I think I could hit a papper plate at 75 yards with it every time.