Author Topic: p-95  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
p-95
« on: August 26, 2010, 04:47:17 PM »
My P-95 is very reliable bit I can throw a rock as accurate as i can shoot this gun.

I own other hanguns that I can shoot quite well. I have tried many loads. 

Any thoughts.

Offline mattmillerrx

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 611
  • Gender: Male
Re: p-95
« Reply #1 on: August 27, 2010, 02:30:58 PM »
That is some accurate rock throwing and must take some real practice.

What kind of groups are you getting and at what range?  Has anyone else shot the gun well?  Depending on how bad it is, you might consider sending it to Ruger.

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #2 on: August 28, 2010, 02:59:48 AM »
20 rounds at 7 yards would not hit  a plastic water bottle. I had it surrounded. 5 rounds were from a rest, using a tree.

The sending to Ruger idea might be the best but shipping is a killer. I bought this used a while back for 200 bucks, I think.

It looked like new. I shout it for function only back then.

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
Re: p-95
« Reply #3 on: August 28, 2010, 07:47:01 AM »
Hi....minute of water bottle is kinda vague.  Did you set up a target and shoot it at a discernable aim point??  I understand that you are unhappy with the accuracy, I would be as well, but a more focused aim point goes along way to supporting your argument with Ruger.

Also...the shipping thing??  I've shipped a rifle and pistol back to them with insurance...it cost about $22 each.

If you think it's a waste...sell it.......
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #4 on: August 28, 2010, 08:09:36 AM »
I was aiming at the center of a filled plastic water bottle at seven yards. As I stated, the shots had the bottle surrounded.

Some high,some low some left and some right. Some were from a solid rest. I guess it would be about an 18 inch group.

With other handguns i have used the caps as targets  at the same range and they are easy to hit.

I thought FEDex wants about 80 bucks to ship a handgun. Next day air or something similar must be used by them. I assumed UPS was similar.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: p-95
« Reply #5 on: August 28, 2010, 08:37:36 AM »
UPS just cost me $70 bucks also.  You cannot ship hand guns through USPS or face federal charges.  One thing I learned after the fact was my dealer told me that if I ever had to send one back, to bring it to him and he'd get a call tag and it would cost about 12 bucks!!!!  Oh, well, live and learn.  Hopefully, this info will help you to know how to do it.  Even if you take it to a gun shop and pay a $25 FFL fee for the day, it's still a lot cheaper.  ;)  Good luck man.
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline Masterblaster1

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 223
Re: p-95
« Reply #6 on: August 28, 2010, 10:49:55 AM »
What grain weight are you shooting? My P-95 DC does much better with 124 or 147's than with 115 grainers. I use 147 Grain Golden Saber if I am serious about hitting something.

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #7 on: August 28, 2010, 01:00:25 PM »
These were 115's.

Offline drdougrx

  • GBO Supporter
  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 3212
Re: p-95
« Reply #8 on: August 28, 2010, 05:37:36 PM »
Pretty strange GS...should shoot better than that....I'd send it back for sure....

I checked again with my UPS shippments...I sent a Blackhawk in February and a #1 in June to Ruger.  Just regular UPS ground with insurance...was $22 and change for each.  Maybe has something to do with where you live??  I live in MA and the guns went to NH.
If you like, please enjoy some of my hunt pics at:

http://public.fotki.com/DrDougRx

If you leave a comment, please leave your GB screen name so that I can reply back!

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: p-95
« Reply #9 on: August 28, 2010, 06:03:36 PM »
UPS now has a next day air only requirement for shipping handguns.  That way they said it wasn't in their system for any longer than necessary.  8(  An FFL can send them boxed normal though, which makes no sense to me. 
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #10 on: August 29, 2010, 02:53:21 AM »
 I will slug the barrel this week. Online somewhere else, it was mentioned that some P-95 's have very oversized bore diameters.

Offline gtv

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Re: p-95
« Reply #11 on: August 29, 2010, 04:42:45 AM »
My P95 is extremely accurate...  much more accurate than I am capable of offhand.  Have you called Ruger yet?  They usually have excellent customer service.  I had to send mine back in due to an ejector issue, and they sent me a UPS shipping label.  Didn't cost me a penny.  If you let them know how bad it is grouping, they may do the same for you.

Offline Yes, 357_SIG

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 204
  • Gender: Male
Re: p-95
« Reply #12 on: August 30, 2010, 10:43:09 AM »
You can ship your legally owned handgun by USPS to a gunsmith / factory.
The price of Liberty is unfailing vigilance !

Offline Keith1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
Re: p-95
« Reply #13 on: August 31, 2010, 06:43:40 PM »
About 3 months ago I sent a Contender by UPS to T/C and it cost less than $20.
      Keith

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: p-95
« Reply #14 on: September 01, 2010, 12:47:38 PM »
About 3 months ago I sent a Contender by UPS to T/C and it cost less than $20.
      Keith

Then you got lucky friend!  8)   From UPS website http://www.ups.com/content/us/en/resources/ship/packaging/guidelines/firearms.html?srch_pos=1&srch_phr=ship+handgun

Quote
Handguns, as defined by 18 U.S.C. § 921,will be accepted for transportation only via UPS Next Day Air® Early A.M.®, UPS Next Day Air®, or UPS Next Day Air Saver® services. (Note: UPS Express CriticalSM Service is not available for firearms).

The charge is calculated by weight, so some guns will weigh less, but base charge is supposed to be 36 bucks IIRC.  Mine was $70+ for the UPS Next Day Air Saver Service®.  If your counter person knowingly puts it in a std. box or you don't claim it, there can be serious repercussions.  I wouldn't try to sneak past, because if it's improperly claimed and it disappears, you have no back-up.  Next thing you know, your gun is being used to hold up a store or kill someone and without proof, guess who they are coming to see...
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #15 on: September 02, 2010, 10:19:02 AM »
I tried american eagle 115 gr fmj and got much better results. I had no luck with WWB with this gun.

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: p-95
« Reply #16 on: September 02, 2010, 10:57:06 AM »
I have a coffee can full of 147 grain cast bullet loads (unique) that are very accurate for a semi-auto.  Full clips into 3-4" at 25 yards are not uncommon.  My lighter loads are 122TC bullets....still pie plate groups at 25 yards.   At 7 yards, I'd stick with the rocks.

Steve :) 
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline simplicity

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 574
  • Gender: Male
Re: p-95
« Reply #17 on: September 02, 2010, 11:06:46 AM »
I've owned alot of ruger handguns  and out of them all I've owned three P-95's two of which I had the same problem as stated (couldn't hit the borad side of a barn), and the third shot good groups but it would hardly ever make it through a mag without fetching up. The P-95's are the only model I've ever had a problem with out of all the rugers I've owned. 3 out of 3 were bad, so no more will ever get eye's laid on again from me.

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #18 on: September 02, 2010, 02:05:52 PM »
I wonder if it has something to do with a combination of bore diameter,bullet diameter and bearing surface of the bullets.

The american eagles were combat accurate.  I did not try them before do to their cost. There are about a buck more per 50 now.

I don't reload the 9mm. If I start i might try .357 bullets.

I want a 9mm that shoots decent with cheap ammo.

Offline 1marty

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 751
Re: p-95
« Reply #19 on: September 02, 2010, 05:15:34 PM »
I had a P95 and had "fairly" good groups. The gun never really felt right when I gripped it and I found it too "clunky". Did you try shooting it from a good gun rest. If you do and get good results then it's you not the gun. I layed out the bucks and bought a Browning hi power. The sweetest shooting gun anyone could own.

Offline gs50401

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 133
Re: p-95
« Reply #20 on: September 03, 2010, 04:35:00 AM »
My brutish P-90 is reliable and very accurate but my P-95 is finicky. I thought the Rugers would give similar results.

The p-95  might not be worth much in trade so it will spend most of the time in the safe.

I am looking at a 9mm conversion barrel for my Glock 23 to see how that works.

Offline 44 Man

  • Trade Count: (28)
  • Senior Member
  • *****
  • Posts: 2419
  • Gender: Male
Re: p-95
« Reply #21 on: September 13, 2010, 05:40:20 AM »
I have a friend, new to shooting that just bought a P-95.  We took it to the range and loaded it up.  I walked up to the 10 yd line and put the first three shots out of the gun in an inch!  We knew from that point on that any misses we made we not the gun's fault!  We shot Rem HB and even some Wolf ammo that day.  In fact, I believe it was the Wolf that we used for the first mag full.  It is a very accurate gun.  44 Man
You are never too old to have a happy childhood!