Author Topic: Ultra Slug Hunter no ejection..  (Read 1418 times)

0 Members and 1 Guest are viewing this topic.

Offline chammons

  • Trade Count: (0)
  • Posts: 1
Ultra Slug Hunter no ejection..
« on: September 04, 2010, 03:00:54 PM »
I did a search for this particular problem, but didn't find one.  If you do find one just link it in this post. Thanks!

I was at the range and fired a total of 13 rounds through my 20 Gauge Slug Gun.  Out of 13 rounds only 4 ejected, the rest had to be done by inserting a rod through the barrel.  Anyone encountered this? I do not know if it was the type of shells I was using or something with the gun itself.  I was firing Hornady SST's 2 3/4.  Any help or information would be appreciated!

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Ultra Slug Hunter no ejection..
« Reply #1 on: September 04, 2010, 04:59:50 PM »
Could be your extractor spring broke partially or has some crud in there making it bind.  I'd remove the extractor (steps in faq) and clean it out and lube it well.  Might have even rusted inside that little tube if it got wet at some point.  Be a starting point anyway.  8)
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Ultra Slug Hunter no ejection..
« Reply #2 on: September 04, 2010, 05:10:24 PM »
Ejectors are infamous for not ejecting, that's the biggest reason why centerfire rifles now have mechanical extractors, have for several years, read the ejector tune info in the FAQs and polish the chamber which is also in the FAQs, that should get it working again. if that doesn't help, contact H&R and make arrangements to have it returned for repair, toll free (866)776-9292.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain