New BC owner and newest newbie, need help finding a thread.

[fuzzymonk3y]

Recently purchased a display model BC in 45-70...no tax 2nd amendment weekend plus 10% off for being a display item. (it was this or the one NIB with a hunk, not a piece, of wood missing from the stock) Anyway, the action has a bit of up and down movement from being opened and closed so often. 610 pages of threads and my eyes are tired, but my soul is happy to find so many folks dedicated to one ... ummm ... action? company? spirit! so if you could please direct me to a thread that tells me how to work this little kink out of my lovely new rifle I would appreciate it. thanks in advance, CWF. a.k.a fuzzymonk3y

[quickdtoo]

Welcome!!   If you mean the barrel is loose when the action is locked up, it should go back to H&R for repair, most likely for a new barrel or the broken latch to be replaced, it may have been improperly fitted right from the factory, wouldn't be the first.    If it's loose when the action is open, it doesn't really matter, the forend spacer just needs to be shimmed, I use furnace tape cut just slightly smaller than the spacer so it doesn't show, use multiple layer to tighten the barrel, but not too tight, too tight will affect accuracy.

If you need to send it back, call em toll free (866)776-9292 and make the arrangements to have them cover shipping, they may replace the damaged stock too!!

Tim

[fuzzymonk3y]

If I send it now, will it make back in time for primitive season here in Louisiana?

[Ten Ring]

I doubt you would get it back in time, I would go back to the dealer and see if I could swap the wood on the busted up one.
Jim

[quickdtoo]

If they have a replacement barrel, it won't take long, but they're out of accessory barrels which means they probably don't have one, won't until after the first of the year.

Tim

[quickdtoo]

H&R has their new repair instructions on the website now, they have several repair centers listed which you call, if they can't help, call the toll free H&R number.

Tim

http://www.hr1871.com/Support/repairs.asp


Repair Services

   1. To locate the H&R Autherized Repair Center nearest you. Contact the Authorized Repair Center of your Choice for evaluation of your firearm and/or shipping instructions.
   2. If the H&R Authorized Repair Center cannot provide the service or repair you require and you need further assistance, please call our toll free number at 1-866-776-9292, Mon.-Fri. 9:00 AM-5 PM EST and select the option for repairs.
   3. If shipment of your firearm is required please follow instructions below:
          * Record the serial number of your firearm before shipping.
          * Pack your firearm for safety and to prevent further damage in shipping and handling. Preferably, ship in a firearm box.
          * Remove all accessories from the firearm to prevent loss or damage.
          * Enclose a letter with the firearm detailing the model name or number of the firearm and serial number along with a full description of the problem. Be sure to include your name and address (P.O. Box and Street Address), including zip code, daytime telephone number and e-mail address.
          * Ship your firearm by either United Parcel Service (UPS) or Parcel Post (US Post Office); H&R is not responsible for damage or loss during shipment, so you may elect to purchase insurance from the carrier.

     

[gcrank1]

As said, if it locks up closed you are good, open wiggle is no big deal.
If it doesnt lock up solid closed its a turkey.....plus the wood issue, see if the wholesaler your dealer got it from will exchange with him, etc. or call H&R (cause NIB is supposed to mean something no matter what you paid).
BTW, if it got 'loose' from being open/closed as a display model how long do you think it would last if you are shooting it?

[necchi]

I'm not sure what is ment by,,"the action has a bit of up/down movement"??

Where exactly is this movement??

Is it where the barrel meets the frame? Is it the lever on the side that moves??

Do you use a good swift and firm movement when closing the barrel to the frame??