Author Topic: deer/coyote caliber for contender  (Read 1152 times)

0 Members and 2 Guests are viewing this topic.

Offline gdog243

  • Trade Count: (2)
  • Member
  • *
  • Posts: 9
deer/coyote caliber for contender
« on: October 20, 2010, 06:26:30 AM »
  I am looking for A caliber that I can whitetail hunt and also shoot A coyote with  my contender pistol. I thinking ranges out to 175/200yds. Light recoil and I would be shooting factory loads.  Somebody had mention the 6.8SPC??  I new at this pistol hunting with the contender!    Thanks

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: deer/coyote caliber for contender
« Reply #1 on: October 20, 2010, 07:13:40 AM »
     Using factory ammo really puts a crimp on us Contender shooters.  The 6.8 might be the ticket, but there have been miss-fire issues.  I would prefer the 7-30 Waters.  Factory ammo is available( Federal Cart. only ).  It is a little hard to find and is a little pricey when you do find it.  Midsouth Shooters has it @ $28.XX for a 20 box.  The 6.8 isn't exactly falling off the selves either.  The 30-30 would be a choice too if you could find 125-130gr ammo or even better someone to load you up some 125BT's.  Reed's Ammo might help.  If you're just starting out with your Contender, your anticipated range might be a little ambitious(don't mean to step on anyone's toes here, but that's a pretty fair shot for pistol shooting).  I'd maybe set my sights on a 100yd and work up.  Like I said, no offense to anyone, you maybe a lot better shot with a Contender than I(which wouldn't take much).  My whole point is....you may want ammo that you can shoot a good deal of, in order to see just what you can do at whatever distance. ;)
Have Fun ;D, Walt

Offline mbopp

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 209
  • Gender: Male
Re: deer/coyote caliber for contender
« Reply #2 on: October 20, 2010, 07:34:03 AM »
IMHO your range is a bit optimistic, and anything that would have enough retained energy at that distance wouldn't be low recoil.
So - I'd go with a 30-30. If you wanted to go with 2 barrels I prefer a 35 caliber for deer (35 Remington for factory) and a 223 for coyote. 200 yards would be a strech for the 35 Rem though.
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests." -- Patrick Henry, American Patriot

Offline Curtis

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1131
Re: deer/coyote caliber for contender
« Reply #3 on: October 20, 2010, 11:22:24 AM »
Hand loading opens the field exponentially on caliber choice, and pointy bullets always carry their energy and trajectory further than flat nose bullets.  If limited to factory fodder though, I'm with those who say 7-30 Waters.  30-30 might work out that far, but will not be as flat shooting as the Waters.  As much practice as it will take to be proficient at that distance though, you're going to spend hundreds on factory ammo.

Curtis
Lord, please help me to be half the man my dogs think I am.

Contender in 17 Rem, 22lr, 22k Hornet, 223 Rem, 256 WM, 6TCU, 7TCU, 7-30, 30 Herrett, 300 Whisper, 30-30 AI, 357 mag, 357 Herrett, 375 JDJ, 44 mag, 45/410..... so far.

Offline southernutah

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 560
Re: deer/coyote caliber for contender
« Reply #4 on: October 20, 2010, 02:34:19 PM »
where is Ladobe on this? he's the deer/coyote contender hunter.

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: deer/coyote caliber for contender
« Reply #5 on: October 20, 2010, 02:56:54 PM »
IMHO your range is a bit optimistic, and anything that would have enough retained energy at that distance wouldn't be low recoil.
So - I'd go with a 30-30. If you wanted to go with 2 barrels I prefer a 35 caliber for deer (35 Remington for factory) and a 223 for coyote. 200 yards would be a strech for the 35 Rem though.

Actually, 200 yards would be a stretch for most handgun shooters irrespective of the cartridge.

Offline Doug B.

  • Trade Count: (6)
  • Contributor
  • ***
  • Posts: 396
  • Gender: Male
  • Still A Kid At Heart - 1971 Honda CT70H
Re: deer/coyote caliber for contender
« Reply #6 on: October 21, 2010, 12:50:36 AM »
IMHO your range is a bit optimistic, and anything that would have enough retained energy at that distance wouldn't be low recoil.
So - I'd go with a 30-30. If you wanted to go with 2 barrels I prefer a 35 caliber for deer (35 Remington for factory) and a 223 for coyote. 200 yards would be a strech for the 35 Rem though.

Actually, 200 yards would be a stretch for most handgun shooters irrespective of the cartridge.

I agree. But if you must....why not a .243 Winchester?
"Be A Good Listener. Your Ears Will Never Get You In Trouble"

Cadott/Chippewa Falls, WI

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: deer/coyote caliber for contender
« Reply #7 on: October 21, 2010, 01:21:49 AM »
[I agree. But if you must....why not a .243 Winchester?

.243 Winchester doesn't work so pretty good in a Contender.
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline Curtis

  • GBO Supporter
  • Trade Count: (65)
  • Senior Member
  • *****
  • Posts: 1131
Re: deer/coyote caliber for contender
« Reply #8 on: October 21, 2010, 01:23:12 AM »
I agree. But if you must....why not a .243 Winchester?

Not possible in a Contender.  Encore only.

Curtis
Lord, please help me to be half the man my dogs think I am.

Contender in 17 Rem, 22lr, 22k Hornet, 223 Rem, 256 WM, 6TCU, 7TCU, 7-30, 30 Herrett, 300 Whisper, 30-30 AI, 357 mag, 357 Herrett, 375 JDJ, 44 mag, 45/410..... so far.

Offline Hopalong7

  • Trade Count: (20)
  • Senior Member
  • *****
  • Posts: 1673
  • Gender: Male
Re: deer/coyote caliber for contender
« Reply #9 on: October 21, 2010, 01:39:39 AM »
where is Ladobe on this? he's the deer/coyote contender hunter.
     Has anybody heard from Larry lately.  I pray that he is well.
Walt


Offline luckydawg13

  • GBO Supporter
  • Trade Count: (27)
  • A Real Regular
  • *****
  • Posts: 982
  • Gender: Male
Re: deer/coyote caliber for contender
« Reply #10 on: October 21, 2010, 05:17:35 AM »
its not hard to reload you may wont to kick that around it will open mor doors 730 waters 30/30 AI  309 JDJ 357 MAX TWO BARREL 30/30 FOR DEER 223 FOR THE DOGS YOU CANT HAVE A CONTENDER AND JUST ONE BARREL

IF I HAD TO PICK ONE PISTOL BARREL FOR MY CONTENDER IN A FACTORY LOAD THAT YOU CAN BUY AT A MART STORE AND BRING YOUR RANGE IN TO SAY 125 YARDS MAX
THE 44MAG IS THE 30/06 IN PISTOLS IT CAN DO IT ALL
kids that hunt and fish dont mug old Ladies
and drive a F150

Offline spinafish

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1161
  • Gender: Male
Re: deer/coyote caliber for contender
« Reply #11 on: October 21, 2010, 12:00:13 PM »
run with the 6.8 SPC, I don't believe you will be sorry..I have a 23" rifle barrel and its great!  Am considering a 14" also..If you are interesting in a custom barrel..go with the 6.5 JDJ..there is a good selection of .277 diameter bullets out there for the reloader and several very good factory rounds available also. the 6.5 TCU might be an option, but I would attempt a shot on a whitetail at much over 150 yards with it though.  I have 14" 6.5 TCU that is a tack driver.
the most heartwreching words any man will ever hear
"depart from me, I never knew you"  Jesus
We may ignore, but we can nowhere evade the presence of God. The world is crowded with Him. He walks everywhere incognito.” C.S. Lewis