« previous next »
Pages: [1]   Go Down

Author Topic: Clean Bolt  (Read 949 times)

0 Members and 1 Guest are viewing this topic.

Offline 277284

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
Clean Bolt
« on: October 23, 2010, 01:48:49 AM »
I've had two M48 Yugoslavian 98 mausers and now a M77 Ruger mkII in 280 that I really like.  The bolts on these 3 seem to be in the raw because they accumulate a grunge smear after only a few working of the actions.  I have other bolt actions of various ages but these three are the only ones that acumulate that black dirty oil.  Is there a treatment for the bolts to keep them in the white and more shiny?
Logged

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: Clean Bolt
« Reply #1 on: October 23, 2010, 02:06:53 AM »
I guess first I would try to identifie the source of this "black dirty oil". You my need to flucsh the firing pin spring and its channel out with some good solvent.
Logged
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline 277284

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
Re: Clean Bolt
« Reply #2 on: October 23, 2010, 03:44:32 AM »
It's more of just metal on metal with clean oil turning dark right away from little action motion.
Logged

Offline mrussel

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 838
Re: Clean Bolt
« Reply #3 on: October 25, 2010, 09:02:12 PM »
Quote from: 277284 on October 23, 2010, 03:44:32 AM
It's more of just metal on metal with clean oil turning dark right away from little action motion.

 Try a different oil
Logged

Offline 1911crazy

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4793
  • Gender: Male
Re: Clean Bolt
« Reply #4 on: November 04, 2010, 06:13:59 AM »
You need to clean everything squeeky clean. The dirt can be coming out of the pores of the metal.  Take the bolt apart too. So a good soaking(bolt) in kerosene or diesel fuel may help get the grunge out.  Then i would use a hoppes solvent or a G.I. Rifle Bore cleaner for its final wash and to get the kero/diesel smell off it them too. Have you taken the receiver out of the stock?  If you can you may want to soak the receiver too.

Lately i been washing everything down with rubbing alcohol too.  I haven't ruined any finishes on the wood yet but it may be possible down the road with some stock finishes i'm not sure yet. But it seems to make the oils rise.  Using murphy's wood soap will do it too on wood.  I have used that straight out of the bottle so its strong and let it sit on the wood for a few minutes.  You can actually see the oils leaving the wood.  Then i wipe it off with a dry cloth and repeat until the wood is clean too.  My point is if the metal is seeping oil or making your new oil turn black it can also come from the stock bleeding too.  Sorry that i go off sometimes without explaining myself.  If i do just ask what i mean.


(stock info) But i do notice some stocks are so oily they continue to bleed no matter how i wash them down.  I have one sitting here near me that bleeding so bad i get oily hands everyday when i touch it its completely soaked.
Logged

Offline hillbill

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3285
Re: Clean Bolt
« Reply #5 on: December 26, 2010, 01:37:21 PM »
ive noticed that midway usa has a compuond called whitening? spelling? thats supposed to suk the oil out of stocks? mite have a look at it.
Logged

Offline Steve85569

  • Trade Count: (2)
  • Member
  • *
  • Posts: 19
  • Gender: Male
Re: Clean Bolt
« Reply #6 on: December 27, 2010, 01:28:13 PM »
+1  to what 1911crazy says.

Cosmoline is the most likely culprit. Deisel, sewing machine oil ( I don't know where it went honey honest), 3 in 1 oil and transmission fluid are a few of the solvents I have used. If you are able to dis-assemble and reassmble you can also scrub the parts with solvent and a small parts brush. One of the wofe's surplus rifles required that cleaning to cure bolt problems.

Just my 2¢

Steve
Logged
Pages: [1]   Go Up
« previous next »