Author Topic: Barrel Accessory Program woes  (Read 1853 times)

0 Members and 1 Guest are viewing this topic.

Offline wganz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
Barrel Accessory Program woes
« on: October 24, 2010, 07:23:10 AM »
Anyone got the skinny on what is happening with the Barrel Accessory Program(BAP)? From my phone call, sounds like they have a total of 10 barrels in stock and half of those are in 7.35mm Italian. Are they going to phase the BAP out or they're still floundering through the acquisition or run out of money to stock any up?

Inquiring minds want to know.

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: Barrel Accessory Program woes
« Reply #1 on: October 24, 2010, 07:30:42 AM »
7.35 carcano ??..........hmmmm
i gots a 7.35carc  milsurp, maybe need a handi too  8)
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #2 on: October 24, 2010, 07:32:24 AM »
Who'd ya call to learn about 7.35 Italian barrels, or more appropriately, what were they smoking?  ::) They have no barrels to speak of at this time and won't until next year, just an educated guess from previous calls, but they make more money on complete firearms, so in this time of economic hardship they're putting their resources into the best money maker to stay solvent. Ask again in the first quarter of 2011.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: Barrel Accessory Program woes
« Reply #3 on: October 24, 2010, 07:44:45 AM »
that makes sence tim !!! i've tried to find .298 bullets  (iirc)....NADA !!!!
i used to cast them with a homemade sizer for the milsurp.
also seen a few loaded variations but never bought them
so its just a wall hanger now  ;D
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline wganz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
Re: Barrel Accessory Program woes
« Reply #4 on: October 24, 2010, 08:45:16 AM »
7.35mm Carcano = wild exaggeration to emphasis situation 

Probably should of wrote 8x52Rmm Siamese but Tim probably has already had at least two of them. :P

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #5 on: October 24, 2010, 08:58:43 AM »
Don't have those.....yet!!  ;D

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Papa Jack

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #6 on: October 24, 2010, 10:02:10 AM »
Carcano Huh..... Boy thats too bad, I had my heart set on either a Jap or a 8mm Lebel......Maybe if I write Remington and ask em, they will come thru.
 Honestly, I would really like them to come out with some of the newer Hornady /Marlin/Ruger cartridges, I would think that would really give the Handi Rifle program a shot in the BUTT !!    Just my opinion ya know.....   "Papa Jack" ;D
Viet Nam Veteran, 69-70, Troop D (AIR) 3/4 Cav. 25th Inf. Div. CUCHI. Helicopter Crew Chief UH-1H.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #8 on: October 24, 2010, 02:00:18 PM »
I'm a'turnin' blue from holdin' my breath...........
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #9 on: October 25, 2010, 11:27:59 AM »
The H&R barrel program is still very strong, we now have most of the barrels in stock. we do not make a 7.35mm Italian. just 35 wheelen & 35 Rem. we now also have 222 barrels available.



                                                                                                              Brian @ Remington repair:

Brian@Remington

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #10 on: October 25, 2010, 11:56:13 AM »
Fantastic news!!!
Thanx for the undate and for 'being here'. too!
Im sure a bunch of people will be knockin' at your door.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #11 on: October 25, 2010, 01:03:57 PM »
The H&R barrel program is still very strong, we now have most of the barrels in stock. we do not make a 7.35mm Italian. just 35 wheelen & 35 Rem. we now also have 222 barrels available.   

Welcome back Brian, and thanks for the update, I do hope you check in a little more often than every 2½ years tho!!  ;D

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Barrel Accessory Program woes
« Reply #12 on: October 25, 2010, 01:19:06 PM »
The H&R barrel program is still very strong, we now have most of the barrels in stock. we do not make a 7.35mm Italian. just 35 wheelen & 35 Rem. we now also have 222 barrels available.



                                                                                                              Brian @ Remington repair:

Nice to hear from someone in the know!  ;)
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline moorepower

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 518
Re: Barrel Accessory Program woes
« Reply #13 on: October 25, 2010, 01:25:56 PM »
Would it be possible for them to update the site as to what is on hand?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #14 on: October 25, 2010, 01:29:47 PM »
It sure would be nice if Madison was on the same page as Ilion!!

Tim


I called NEF last week to inquire about available barrels, from their accessory barrel program.
I asked what was available. Answer: "Pretty much nothing"! Are they going under?
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dan71

  • Trade Count: (1)
  • Member
  • *
  • Posts: 26
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #15 on: October 25, 2010, 02:19:51 PM »
I called Friday about a few barrels. Only thing they told me it's about a 5 weeks after they receive your retriever.
"It's Gods job to judge the terrorists...
It's our job to arrange the meeting".

Life Liberty and the Pursuit of all who Threaten it.

Offline krod47nw

  • GBO Supporter
  • Trade Count: (250)
  • Senior Member
  • *****
  • Posts: 1133
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #16 on: October 25, 2010, 02:43:51 PM »
I called Friday about a few barrels. Only thing they told me it's about a 5 weeks after they receive your retriever.



Why do I have to send them my DOG!!??  ;D ;D :D :D ;)
The beauty of the Second Amendment is that it will not be needed until they try to take it.  Thomas Jefferson

Offline nova71

  • Trade Count: (60)
  • Contributor
  • ***
  • Posts: 494
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #17 on: October 25, 2010, 05:32:47 PM »
 ;D I was wondering how long it would be before someone said something about that  ;D ;D ::)
It is better to take refuge in the Lord than to trust in man. Psalm 118:8 (center of the bible)

Handi-List
 204Ruger, 223Rem, 243Win, 30-30Win,450 Marlin, 44Mag, 357Max, 357Mag, 45-70, 20ga Partner, 20ga shorty.

Offline wganz

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
Re: Barrel Accessory Program woes
« Reply #18 on: October 25, 2010, 06:26:23 PM »
The H&R barrel program is still very strong, we now have most of the barrels in stock. we do not make a 7.35mm Italian. just 35 wheelen & 35 Rem. we now also have 222 barrels available.
                                                                                                              Brian @ Remington repair:

Hopefully that means .223 barrels since my niece bamboozled me out of my .223 bull barrel Handi.  :'(

Now the other two nieces are dropping hints that they too need a .223 Handi just like their big sis got. Sheesh, what is an uncle to do?  ::)

All in all, this is good news indeed. Thanks to Brian for that update and I'm going to give them a call tomorrow to get my receiver headed out to them next payday with the USPMO for another barrel or two.  ;D

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
Re: Barrel Accessory Program woes
« Reply #19 on: October 26, 2010, 04:16:26 AM »
I just called H&R and was advised they have no 35
Rem barrels and have no plans on making any.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #20 on: October 26, 2010, 05:30:25 AM »
That's what I'm talking about!!  ::) We know they make 35 Rem barrels because there are members here that just bought 35 Rem rifles, that's just more misinfo from Madison.  :-\

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Ten Ring

  • GBO Supporter
  • Trade Count: (18)
  • Contributor
  • *****
  • Posts: 297
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #21 on: October 26, 2010, 06:35:29 AM »
They said that about the Whelen"s too.
Jim
223,22-250,280,270,357m,2-35 whelen,2-444 marlin,3-45/70,45LC,45/70BC.,500SW,35rem,300aac,44mag

Offline lendar

  • Trade Count: (1)
  • Member
  • *
  • Posts: 95
Re: Barrel Accessory Program woes
« Reply #22 on: October 26, 2010, 07:17:59 AM »
I just got off the phone with H&R again.  This time I was told that the 35 Rem barrel will be offered right after hunting season.  The lady I talked to this time told me she is in charge of the web site updates and to watch the web site to see when the barrels are ready.  This is the the H&R that I used to deal with.

Offline montveil

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 343
  • Gender: Male
Re: Barrel Accessory Program woes
« Reply #23 on: October 26, 2010, 07:42:51 AM »
I had a second barrel fitted at the factory and would not do it again. At first it seems like a great deal BUT after you get a second scope, pay for shipping, insurance, the barrel and fitting it is almost worth getting a complete new rifle. 
This might not be the case if you use open sights on the new barrel.
I prefer the new rifle approach as I then have a separate rifle on demand and it makes selling the rifle a lot easier etc.
Just my thoughts

MONTVEIL IN THE NC MOUNTAINS