Author Topic: Model 750  (Read 948 times)

0 Members and 1 Guest are viewing this topic.

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Model 750
« on: October 29, 2010, 05:58:45 PM »
I like bolt actions and all, but I'm slow with them past 100yds (gotta get my eye refocused without scope shadow).  I'm not really a fan of semi-auto hunting rifles but I know a relative that has one of those 750's in 6mm something or other and he puts down multiple deer a year just fine... and the rifle looks good too.  After owning a handi-rifle awhile I am really beginning to like a slim, quick gun.  I've already got one M700 so I don't want another of those. 

Next question, if the reliability is poor due to a dirty bolt, is the 7600 a good alternative?  When I say dirty, I mean within 100rds.  I'm a former marine so I get pretty thorough with my cleaning- don't mind digging crud out of a gas impingment system, just not after a few mags.

Offline Thebear_78

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1006
Re: Model 750
« Reply #1 on: October 30, 2010, 07:20:05 AM »
I had a Remington 750 in 35 whelen.  It was accurate and quick handling.  The reliability issue on the 750s is the same as all the remington autos.  The magazines.   99% of the time if there is an issure with feeding it is the magazine.  With a good magasine it woudl run like a top.  Its really important to not leave the magazine loaded for long lengths of time because it weakens the mag spring and if they get weak all the cartrdges will just squirt out or jam.   

Take care of you magazines and the gun will be just fine.  Mine was actually quite accurate too.  I would have probably kept it but there was no quiet way to load it and I rarely carry with a round in the chamber.

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Model 750
« Reply #2 on: October 30, 2010, 07:39:39 PM »
 The noise factor is pretty much the problem with all auto bangers or pumps. I don't like the idea of pulling up a loaded firearm to a treestand even if cased. The only option then is to load up once up the tree. I can ease the bolt forward but the operating handle still requires a small tap to bring the bolt into battery because the ejector needs to slip over the case..

 Equally anoying are safeties that make a click regardless how slow you apply them.
What is the point of Life if you can't have fun.

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: Model 750
« Reply #3 on: October 30, 2010, 09:10:13 PM »
honestly I will sit still holding the rifle in my lap off safe and ready to go UNLESS I put it down to pee or drink (if I'm gonna violate noise and motion discipline then I go all out).  I'm just wondering about reliability, accuracy to 200yds at least, necessary frequency of maintenance, handling.  I don't know about all 700's but MINE has a definite snap to the safety and it's real tough to push to fire too, I can't imagine the 750 being WORSE then it is.

how's the trigger?  I cannot believe I never specified that specific issue, it's a big one.  can they take x-mark's and aftermarket stuff for 700's?

Offline Thebear_78

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1006
Re: Model 750
« Reply #4 on: October 31, 2010, 06:38:09 AM »
The trigger on the one I had was actually pretty good.  THey can't take the remington 700 trigger but they can be smoothed out a bit by a good smith if needed.   The noise factor of the safety is a non issue, there really isn't enough noise to worry about.  I wouldn't have any problem with leaving it loaded while on stand but I wouldn't take it off safety until ready to fire.  There is really no down side to leaving the safety on until ready to shoot, and chances of an accidental discharge are much higher if safety is left off.

Offline DevilDOG_0341

  • Trade Count: (0)
  • Posts: 4
  • Gender: Male
Re: Model 750
« Reply #5 on: November 12, 2010, 06:59:38 PM »
Semper FI...Personally I haven't shot a 7600, but it's practically the same as the old 760 except for a few adjustments according to the research I have done.  I currently have a 760 30-06 and am seriously thinking of retiring it due to it's age and how great condition it is in.  It was originally given to my father when he was 24 yrs old (1967) and he hunted with it every year until 1999 killing everything from grizzly bear to mule and white tail deer.  Since he gave it to me in 2003, I have shot over 50 rounds through it and it has never jammed once on me.  According to my father, he never remembered it jamming on him either.
As you, I keep my weapons clean after every use and I still take the old 760 out 4 times a year and wipe her down and clean it. 
Before I stopped shooting it I was able to get 2'' groups from 200 yds.  Occasionally I would get a good looking 2" group at 300, but in Northwest Ark you don't really have any 300 yd shots.

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Model 750
« Reply #6 on: November 12, 2010, 07:07:11 PM »
Very recently I had cause to go looking for a shot deer in fading light and took a good tumble( at my age it is getting easy to do) I had a loaded 742 in hand. I managed to keep control of the rifle at the expense of a couple of bruised ribs and was very glad the safety was ON.
What is the point of Life if you can't have fun.

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: Model 750
« Reply #7 on: November 16, 2010, 02:55:27 AM »
I'm saying that when i'm in a full-sized, sturdy, permanent, treestand that is built like a kid's treehouse I sit in a chair holding the rifle pointing outboard in my principle direction of fire with the safety off and my finger indexed above the triggerguard, forend of the stock (or bipods) resting on the railing and more or less pointing at where the deer is SUPPOSED to pop-out.  if the gun moves from that position, or if I change that hold, then it goes on safe.  I don't fidget around in my pockets getting my chew and soda with the gun bouncing around waiting for the trigger to get snagged.

This year I was in a ladder stand, in an area I'm not totally familiar with, high-up and there was the possibility that me and the gun both would have went down and the safety didn't come off in three days.... because when I went to fill my does tags I never saw one long enough to get my crosshairs on it.  Also I had a pistol out for close up shots and figured I could bump the rifle around and possibly snag the trigger on my mesh blaze orange vest while leaning over the rifle to take a pistol shot.  Also muzzle control was in a safe/wooded/uninhabitied area but not at my principle direction of fire so I kept it on (it was sitting across my lap OR slug on a hook next to me depending on what I was doing, either way the muzzle was lateral or skyward). 

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: Model 750
« Reply #8 on: November 16, 2010, 03:01:24 AM »
Semper FI...Personally I haven't shot a 7600, but it's practically the same as the old 760 except for a few adjustments according to the research I have done.  I currently have a 760 30-06 and am seriously thinking of retiring it due to it's age and how great condition it is in.  It was originally given to my father when he was 24 yrs old (1967) and he hunted with it every year until 1999 killing everything from grizzly bear to mule and white tail deer.  Since he gave it to me in 2003, I have shot over 50 rounds through it and it has never jammed once on me.  According to my father, he never remembered it jamming on him either.
As you, I keep my weapons clean after every use and I still take the old 760 out 4 times a year and wipe her down and clean it. 
Before I stopped shooting it I was able to get 2'' groups from 200 yds.  Occasionally I would get a good looking 2" group at 300, but in Northwest Ark you don't really have any 300 yd shots.

did you mean 50rds consecutively?  if so that's good, especially for a gun that's actually seen the field.  I know a safequeen would do well... until dirt happens.  I don't drop my stuff but I lay down sometimes to look under trees... might throw a few rocks after seeing nothing for 1/2 hr to spook up some game too.  I did that yesterday and all I accomplished was scaring squirrels and getting my 1911 in the dirt/loam.   :P  Good hunting guys.  I hope your ribs are good now scatter

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Model 750
« Reply #9 on: November 16, 2010, 12:46:07 PM »
My ribs are fine now, the Bambi ribs are in the freezer :D
What is the point of Life if you can't have fun.

Offline Squib

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1592
  • Gender: Male
  • G- S- T- and I ain't got time to bleed!
Re: Model 750
« Reply #10 on: November 20, 2010, 04:01:57 PM »
I stripped mine down, took his tough sinewy calves even.... though I didn't dig out the tiny stuff in the front shoulders or between the ribs. 


Guess both our tummies are good too now!  :P