Author Topic: #1 field carriage restoration  (Read 824 times)

0 Members and 1 Guest are viewing this topic.

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
#1 field carriage restoration
« on: October 31, 2010, 06:53:12 AM »
Several years ago I restored a #1 field carriage for one of my re-enacting buddies.  That group mounted a reproduction Wiard Rifle on it.  I know that a Wiard had different cheeks than a standard #1 but they worked with what they had.  The gun lived on a trailer outside and had all the cancers that those living conditions prompted.
It was a lot of work.  Here are some of the pictures.

In the shop ready for disassembly. 



Note the rot.




Metalwork ready for sandblasting, priming and paint
Zulu's website
www.jmelledge.com

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: #1 field carriage restoration
« Reply #1 on: October 31, 2010, 06:57:26 AM »
Rotted wood cut out and replaced with new oak.





Ready for linseed oil

Zulu's website
www.jmelledge.com

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: #1 field carriage restoration
« Reply #2 on: October 31, 2010, 06:59:31 AM »
Oiled and ready for priming and paint





Painting started
Zulu's website
www.jmelledge.com

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: #1 field carriage restoration
« Reply #3 on: October 31, 2010, 07:04:53 AM »
Reassembly




Mounting the tube


My Parrott on the right and Wiard on the left.


Unfortunately, I can't find any good pictures of the tube.  Also, most unfortunately, The gun continued to live on a trailer, outside all these years and is in extreme disrepair.  At this time the carriage is unusable till new wheels are found.  They are rotted and have mushrooms growing out of them.
Hope youu enjoyed the pictures.
Zulu
Zulu's website
www.jmelledge.com

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: #1 field carriage restoration
« Reply #4 on: October 31, 2010, 07:57:30 AM »
Rot, mushrooms,Houston.....

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: #1 field carriage restoration
« Reply #5 on: October 31, 2010, 03:19:44 PM »
... and is in extreme disrepair.

Didn't learn from the first experience, I guess.  Should have built a cover on the trailer.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline Uncle Dave

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
Re: #1 field carriage restoration
« Reply #6 on: October 31, 2010, 04:35:35 PM »
It's a shame to see such craftsmanship go to waste.

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Re: #1 field carriage restoration
« Reply #7 on: October 31, 2010, 08:09:57 PM »
Just a thought, has anyone tried one of the wood water proofing or sealers (cannot remember the names) like those sold in either home depot?. Thompsons seems to ring a bell. I did a rather large 4'x 10' planter made out of 4"x4" pressure treated wood and still looked as good as when I made it. Frank

Offline Zulu

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2477
  • Honor is a gift a man gives himself.
    • Wood & Ironworks
Re: #1 field carriage restoration
« Reply #8 on: November 01, 2010, 07:59:31 AM »
Just a thought, has anyone tried one of the wood water proofing or sealers (cannot remember the names) like those sold in either home depot?. Thompsons seems to ring a bell. I did a rather large 4'x 10' planter made out of 4"x4" pressure treated wood and still looked as good as when I made it. Frank

Frank,
I think pressure treated wood will easily last 20 years or longer if you keep it off the ground.  I have used Thompson's Water Seal and have not been very satisfied with the results.  It did not last very long in my application.
Zulu
Zulu's website
www.jmelledge.com

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: #1 field carriage restoration
« Reply #9 on: November 01, 2010, 08:44:22 AM »
it depends a lot on what type of pressure treatment it got , here we got half a dozzen different grades
some of them can survive as long as 50+ years burried in the ground , mostly used for phone poles and such things .

larix decidua or lärk as its called in swedish is a very very good wood to take moisture for a long time without to rot .
sorry but I dont know the english name
its often used for stable flors
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline gulfcoastblackpowder

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 808
Re: #1 field carriage restoration
« Reply #10 on: November 01, 2010, 12:14:31 PM »
Looks like the English name is larch, but it appears that it is not very common in the US.  There are American (Larix laricina), Subalpine (Larix lyallii), and Western (Larix occidentalis) Larch.  Being species of pine, I don't know that they would be well suited to use in a cannon carriage, even though they may be better able to resist decay/rot.

http://en.wikipedia.org/wiki/Larch

Offline Uncle Dave

  • Trade Count: (0)
  • Member
  • *
  • Posts: 27
Re: #1 field carriage restoration
« Reply #11 on: November 01, 2010, 12:33:46 PM »
I grew up on a draft horse farm.  We used to treat exposed wood such as hitch tongues with linseed oil.  Seamed to work very well over the long run.

Offline gary michie

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
    • michigun3.com
Re: #1 field carriage restoration
« Reply #12 on: November 01, 2010, 04:02:53 PM »
Hi ;D
Here in the north west we have larch and I have though of making a carriage of larch more than once. as you know good big hard woods don't grow here and I have had a rotton time getting good oak to  make my full scale carriages. I'm not sure that the larch is a pine species it 's needles fall off each year and here if you want to build a good house, you use fir or larch. Untill a few years back they were sold in the same pile. Our pine is soft white wood and makes even bad fire wood, on the other hand larch is pretty hard and where a ceder post will last 7 years in the ground a larch last 5 and a pine maybe 2.
gary
Gary

Offline gulfcoastblackpowder

  • GBO Supporter
  • Trade Count: (0)
  • A Real Regular
  • *****
  • Posts: 808
Re: #1 field carriage restoration
« Reply #13 on: November 03, 2010, 12:57:25 AM »
If you look at the link I provided, you can see "Family: Pinaceae", which is the same family known as pines.  I haven't handled larch wood, but it certainly could be a fair bit different from other pines.