Author Topic: Current twist rate for .357 MAG?  (Read 1285 times)

0 Members and 1 Guest are viewing this topic.

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Current twist rate for .357 MAG?
« on: November 07, 2010, 02:53:34 PM »
I'm dreaming about a better mousetrap ::)......I checked the FAQs and it states 1-18 3/4" or 1-15 1/2". What are the current ones being twisted?  I would think that 1-15 1/2" would be fine for a 35 Whelen rechamber but not 1-18 3/4".

Thoughts?

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: Current twist rate for .357 MAG?
« Reply #1 on: November 07, 2010, 03:46:38 PM »
Dinny, my .357 Mag. "Made in Ilion" has the 1:15-1/2" twist rate. Can't help ya with the other question.

Bill

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Current twist rate for .357 MAG?
« Reply #2 on: November 07, 2010, 03:59:13 PM »
Dinny, my .357 Mag. "Made in Ilion" has the 1:15-1/2" twist rate. Can't help ya with the other question.

Bill

That's encouraging! Maybe it will work.

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Current twist rate for .357 MAG?
« Reply #3 on: November 08, 2010, 11:32:05 AM »
Dinny, my Greenhill chart says a 1:19 twist is good for a max 237gr. bullet @ 1.01" long
and the 1:16 a max of 282gr. @ 1.19" long.
Hope this is helpful.
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Current twist rate for .357 MAG?
« Reply #4 on: November 08, 2010, 02:12:27 PM »
Dinny, my Greenhill chart says a 1:19 twist is good for a max 237gr. bullet @ 1.01" long
and the 1:16 a max of 282gr. @ 1.19" long.
Hope this is helpful.

Thanks, it does!


Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Current twist rate for .357 MAG?
« Reply #5 on: November 08, 2010, 02:19:07 PM »
Dinny,

I've shot 250gr spitzers in my 1:16" RMEF Whelen with no problems at 100yds, dunno what they'd do at 200-300yds tho. I don't recollect anyone saying they had a 1:18¾" twist 357Mag barrel on the poll that we did once upon a time, not saying they don't exist, just that the source at H&R for the twist info may have been old H&R Inc info.

Tim

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Current twist rate for .357 MAG?
« Reply #6 on: November 08, 2010, 02:28:32 PM »
1:16" twist is probably the most versatile twist allowing for a wide weight range of bullets to be used. I can't imagine that the 1:15 1/2" twist would be all that bad. Perhaps a good gunsmith could cut a Whelen chamber with minimal headspace and increase the Whelen's functionality and reliability.

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Current twist rate for .357 MAG?
« Reply #7 on: November 08, 2010, 03:18:54 PM »
Given a decently straight, cleanly reamed and well rifled barrel, the most important work is properly chambering the thing. How well that is done determines if it will shoot well or not. Dont scrimp there!
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Current twist rate for .357 MAG?
« Reply #8 on: November 08, 2010, 03:27:02 PM »
Given a decently straight, cleanly reamed and well rifled barrel, the most important work is properly chambering the thing. How well that is done determines if it will shoot well or not. Dont scrimp there!

That is a lesson that I have already learned. Fortunately I didn't learn it the hard way. My mother's .357 Max Handi was professionally reamed and throated with a specific bullet in mind. The throat was cut perfectly in-line with the bore. I actually shot several groups that were 5/8" at 100yds.

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: Current twist rate for .357 MAG?
« Reply #9 on: November 08, 2010, 06:51:48 PM »
Dinny, You are a good son. "Mom's 357max" I like hearing that. -gary
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline Dinny

  • Moderators
  • Trade Count: (268)
  • Senior Member
  • *****
  • Posts: 5524
  • Gender: Male
  • "Medics Save"
Re: Current twist rate for .357 MAG?
« Reply #10 on: November 09, 2010, 12:13:59 PM »
Dinny, You are a good son. "Mom's 357max" I like hearing that. -gary

Good sons don't let their moms shoot 357 Magnums, it's gotta be a Maxi:D  ;)

She did tell me just the other day that the long bullets shot much better than the shorter ones.  ;D

Thanks, Dinny
Handi Family: 357 Max, 45 LC, 45-70, 300 BLK, 50 cal Huntsman, and 348 Win.

"If there must be trouble, let it be in my day that my child may have peace"
Thomas Paine