« previous next »
Pages: [1]   Go Down

Author Topic: Which Powders for .40 S&W w/Cast Bullets?  (Read 1802 times)

0 Members and 1 Guest are viewing this topic.

Offline jasonprox700

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 461
  • Gender: Male
Which Powders for .40 S&W w/Cast Bullets?
« on: December 17, 2010, 09:53:54 AM »
I'm looking for suggestions on powders for my .40 S&W shooting both 165 & 180gr cast bullets.  If possible, I'd like to stick with one that I can use between both bullets.  I've never loaded for a pistol before, so any suggestions would be helpful.
Logged

Offline 1sourdough

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1003
  • Gender: Male
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #1 on: December 17, 2010, 12:00:58 PM »
 I use Hodgdon Universal with 165 grn plated bullets. My loads are mild but have cycled fine in several guns. My charge is 5.1 grains.
Logged
NRA, Veteran

Offline calvon

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 274
  • Gender: Male
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #2 on: December 17, 2010, 12:24:14 PM »
I've been using AA-7 with good results with a 185 cast bullet in a P-229 Sig. I've also used Winchester WSF with good results. I prefer the ball powders because they meter so good.
Logged

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #3 on: December 19, 2010, 06:30:23 AM »
According to my Lyman 49th edition, you can use Bullseye, Unique, AA#5, 231, Power Pistol, and 800x, amongst others.  If you need a recipe you can contact the manufacturer, but you might want to think about getting a couple of reloading books.
GH1 :)
Logged
I owe my life to an organ donor

Offline Dand

  • GBO Supporter
  • Trade Count: (35)
  • Senior Member
  • *****
  • Posts: 2974
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #4 on: December 19, 2010, 09:23:53 PM »
Universal Clays, Unique and Bullseye have all worked well for me in my Walther p99.
Logged
NRA Life

liberal Justice Hugo Black said, and I quote: "There are 'absolutes' in our Bill of Rights, and they were put there on purpose by men who knew what words meant and meant their prohibitions to be 'absolutes.'" End quote. From a recent article by Wayne LaPierre NRA

Offline KansasPaul

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 205
  • Gender: Male
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #5 on: December 20, 2010, 04:21:53 AM »
I've been using Winchester 231 for my cast loads in .40 S&W.  The bullets I am using are Missouri Bullets - 185 grain. Absolutely no issues with this powder.
Logged

Offline rybo

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #6 on: December 22, 2010, 10:41:46 AM »
I have had good results with AA#5, Unique & Universal Clays
Logged
Insert funny/sarcastic/philosophical/witty saying here.

Offline Savage

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4397
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #7 on: December 23, 2010, 02:40:28 PM »
As others have said, most any relatively fast pistol powder works great with cast bullets in .40.  I currently using "Promo" with the 170gr LSWC from Missouri Bullet. Go to Alliant's web site for load data. Use Red Dot data for loading Promo.  I bought 4-8# jugs of Promo because of the price. It works great in the 9mm and .45 acp as well.
Savage
Logged
An appeaser is one who feeds the crocodile hoping it will eat him last,

Offline Hit or Miss

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 362
  • Gender: Male
Re: Which Powders for .40 S&W w/Cast Bullets?
« Reply #8 on: December 27, 2010, 02:19:30 PM »
Clays has been my go to powder for years in most of the pistols I load for.
Logged
Which lie got to you so that you refuse Him???
Pages: [1]   Go Up
« previous next »