Author Topic: Making your contender perform booklet (Read 3434 times)

Graycg · « **on:** December 15, 2003, 09:08:15 AM »

Gents,
I have recently moved and lost my copy of this booklet that came with my contender frame that I bought in the late 80s. Would any of you happen to have one that I could copy or does anyone know where there might be one posted on the web that I could download. This book was very helpful with load data and tips and gave instructions on forming brass for and loading the herretts and also for hotshots. If can help me out, please email me at graycg@aol.com. I would be happy to defray copying and mailing costs.

thanks and regards,

Graycg

Hawkeye · « **Reply #1 on:** December 15, 2003, 09:32:56 AM »

I can do some searching .

Mike

Gregory · « **Reply #2 on:** December 15, 2003, 10:58:19 AM »

I'm sure I have a copy. Do you need the whole booklet copied or just the hotshot and brass forming pages?

PM me your address and let me know what you need.

drdoolittle_1 · « **Reply #3 on:** December 15, 2003, 12:55:09 PM »

Graycg, I found my copy...right where I thought it was...that's scary! I can send you anything you need...maybe even scan and email if you like!
Dave
drdoolittle_1@yahoo.com

Bob/FLA · « **Reply #4 on:** December 15, 2003, 12:59:34 PM »

Us this something that everyone might benefit from? If so, is it possible to post in an article?

wheelgun · « **Reply #5 on:** December 16, 2003, 02:00:31 AM »

I would like to see it if you don't mind.I need all the reading material I can get.

helobill · « **Reply #6 on:** December 16, 2003, 03:49:34 AM »

Gray/Greg,
What booklet is this? I have the red one that came attached to a new frame, but it's only the instruction booklet. Can you post a pic of the cover maybe? Who published it?
Thanks,
Bill

Graycg · « **Reply #7 on:** December 16, 2003, 06:14:28 AM »

Thanks folks,
I really appreciate the overwhelming response, you are all so helpful. I appreicate the assistance of you all. I should have one in my hands soon. thanks again!

regards,
Graycg

drdoolittle_1 · « **Reply #8 on:** December 16, 2003, 01:35:10 PM »

Scanned cover, but small text does not show up well...I'll have to experiment then scan the whole booklet to be available to whomever wants!
Dave
Graycg, this is the one you were talking about, right?

drdoolittle_1 · « **Reply #9 on:** December 16, 2003, 01:46:18 PM »

someone want to try to save this image to a disc and then expand it to see if you can read it?

KYODE · « **Reply #10 on:** December 16, 2003, 02:27:40 PM »

i've never seen those. i'd like to have one. where you get em?

drdoolittle_1 · « **Reply #11 on:** December 16, 2003, 02:44:59 PM »

Kyode,
Came with a contender I bought in the early 80's. Want me to copy it and mail it to you? Or can you read the pic I posted?
Dave

HHI #4694 · « **Reply #12 on:** December 16, 2003, 03:06:34 PM »

Those little booklets sell for $50.00+ on Ebay :eek: I know because I sold five of them there for over $50.00 each :shock: I actually felt guilty when the auctions ended :oops:

Lefty Behind · « **Reply #13 on:** December 16, 2003, 03:19:10 PM »

I copied it to a disc and then enlarged it, but then it was too fuzzy to read. If you could, please email it to me at clev.const.@citynet.net
Thanks,
TDLefty

KYODE · « **Reply #14 on:** December 16, 2003, 03:36:24 PM »

drdoolittle, the pic is too small to read here. if you could copy it, that would be super. pm, or email me if needed. thanks

Bob/FLA · « **Reply #15 on:** December 16, 2003, 05:11:33 PM »

Please send copy to me also.

helobill · « **Reply #16 on:** December 16, 2003, 06:08:28 PM »

I'll take one too, e-mail it as an attachment is fine or fax it, or snail mail. any way it works is OK by me. I'll even send you postage if you can't get it to scan ok, and buy you a cool beverage of your choice at the local watering hole.
Bill

trapdoor · « **Reply #17 on:** December 17, 2003, 12:54:26 AM »

If someone is making copies I would like one did not know this existed. Trapdoor

drdoolittle_1 · « **Reply #18 on:** December 17, 2003, 01:42:38 AM »

I am bringing this booklet to work today and making a bunch of photocopies so that I can send some out!
Dave

trapdoor · « **Reply #19 on:** December 17, 2003, 06:07:34 AM »

Drdolittle Thanks for the repl and when you get copies let me know I would appreciate on Thanks Trapdoor

baitwaister · « **Reply #20 on:** December 17, 2003, 07:46:16 AM »

I too would also like the booklet. Will be more than happy to pay any cost incurred in getting one + beverage fee.

Hawkeye · « **Reply #21 on:** December 17, 2003, 08:33:32 AM »

I will pay postage or whatever costs you have.

Mike

quicksdraw45 · « **Reply #22 on:** December 17, 2003, 03:16:57 PM »

I would like a copy also , I just purchased a NIB stainless frame made in 1993 that was "lost" in the dealers stock room and It only came with the safety book and a product catolog .
I would be glad to pay for the effort , Maybe email it to Quicksdraw45@juno.com and I will print it from here . Or by sanil mail would be fine .
Thanks
Jim

drichi · « **Reply #23 on:** December 19, 2003, 06:27:52 AM »

I would be interested in getting a copy of this also. can't seem to find the one that came with my contender that I bought in the early 80's. email me and let me know how I can get photo copys from you. thanks dave

drdoolittle_1 · « **Reply #24 on:** December 19, 2003, 09:35:31 AM »

Photocopies mailed today to: Trapdoor, Kyode, Wheelgun, Bob/Fla, Baitwaister, Hawkeye, Quicksdraw45 & Helobill! I took care of postage....my donation to Graybeard with thanks for the use of this site!
Cheers,
Dave

KYODE · « **Reply #25 on:** December 19, 2003, 10:45:16 AM »

that is a really nice thing you did. i appreciate it greatly! if all the people in the world would take the time to help someone out, just think how great it would be.
just holler if you need anything. good deeds always come back to you at some point. :yeah: :bye:

baitwaister · « **Reply #26 on:** December 19, 2003, 10:45:44 AM »

Drdoolittle you are a heck of a guy and this is a heck of site!

wheelgun · « **Reply #27 on:** December 19, 2003, 11:21:10 AM »

Dr doolittle,
Thats great thanks alot I will be looking for it.Man there are still some good guys around.

Major · « **Reply #28 on:** December 19, 2003, 11:31:42 AM »

drdoolittle

If it is not too late, could you please send a copy to me also? I am new here and just found this thread. I am at L.Laukkonen@verizon.net

Thank you.

drdoolittle_1 · « **Reply #29 on:** December 19, 2003, 11:41:57 AM »

:oops: Shucks you guys! It ain't nothing any of you wouldn't do! I reconize many names from other boards as well and know that all of you are helpful to everyone!! Enjoy!!!!!
Dave

PS Still waiting for addresses from Leftybehind and drichi. Major, you have an email.