CVA Stalker Rifle Question?

[JAM66]

I recently purchased a CVA Optima Stalker rifle from Dicks in .223. When I got it home and inspected it closer, I noticed when the barrel locks up to the reciever , there is an obvious gap on the right side between the barrel and reciever frame. You can slide a piece of paper( maybe thicker) between the barrel and reciever about half way in. It appears to lock up with no movement , but the rear of the barrel is in contact with the reciever only on the left side. Will this effect accuracy or anything?

[OK hunter]

I would be afraid to give you any other answer than if you have a question or doubts, don't shoot it until you call CVA and explain the situation to them.  A photo showing the gap may also be helpful.

I have one on order now and will pick it up next weekend.

Good luck with yours.  Keep us posted of your success.

Cliff

[JAM66]

Here are some pictures.

[OK hunter]

email cva along with the photos, describing the situation, to CVA.  They may well want you to ship the rifle in for inspection.  That is the best & safest way to do it.

Good luck & keep us posted.

Cliff

[Buckskins & Black Powder]

yeah thats a pretty good gap. Call CVA and even send an email to the gunsmith.   danny@bpiguns.com