Author Topic: Lee 405 HB  (Read 600 times)

0 Members and 1 Guest are viewing this topic.

Offline brad925

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Lee 405 HB
« on: January 02, 2011, 09:30:22 AM »
Not sure how much i can size this bullet down. My B.C slug at .457 but my mold throws 'em at between .462 to .463. How far down can i go?

Offline moto357

  • Trade Count: (10)
  • Avid Poster
  • **
  • Posts: 196
Re: Lee 405 HB
« Reply #1 on: January 02, 2011, 03:16:01 PM »
you will be fine sizing to .457 or .458 as needed. 

I've sized bullets, even this particular bullet to beyond .450 and .449 for other uses(doing it in 2 or 3 steps)

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: Lee 405 HB
« Reply #2 on: January 27, 2011, 01:58:33 AM »
I run them through the lubrisizer at .457, then size to .452 and then .449 for my muzzleloader. No problem, they just get longer.
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: Lee 405 HB
« Reply #3 on: January 27, 2011, 08:55:13 AM »
 One other suggestion .WHAT alloy are you using? An alloy containing MORE pure lead , like 20/1 ,MIGHT give you a smaller bullet than a WW alloy. I've found that I can get several thou. difference JUST altering the alloy mix. Of course, this means you have to keep records of the different alloys and start from an empty pot a lot of times!