« previous next »
Pages: [1]   Go Down

Author Topic: Had some Handi project time.  (Read 1619 times)

0 Members and 1 Guest are viewing this topic.

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Had some Handi project time.
« on: January 02, 2011, 01:35:02 PM »
I had gotten some new power tools for Christmas and had some free time to day to do some work on my Survivor. For those that have one of these stocks on their gun you know the comb is really low. I had tried to raise by attaching foam in layers to get a usable height but I never did like how it looked.


I had seen lots of strap on pads and the Choate pads but felt I need some thing a bit higher. So I cut one my self ;D. I used my angle grinder to cut some scrap 1/8" steel that I had around to shape and the mounted it to the stock. I played with the height until I was comfortable. It really changes the whole feel of the gun making it much more comfortable.

Yes I know it is pink. Next project is to repaint.




One thing I noticed is I originally had bolts that went all the way threw the stock. When I tightened them up I was really squeezing the hollow stock so I switched to shorter bolts and the nuts are now inside the stock.
Logged
From the halls of Montezuma

Offline Hit or Miss

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 362
  • Gender: Male
Re: Had some Handi project time.
« Reply #1 on: January 02, 2011, 01:45:34 PM »
Neat concept!  Don't drool on that steel when it's zero outside, you'll lose a chunk of skin that way! :o  Really though, I would be concerned about it being very cold when hunting.
Logged
Which lie got to you so that you refuse Him???

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #2 on: January 02, 2011, 01:54:42 PM »
I hear ya on it being cold. After I get it painted it will get a layer or two of mole skin on it. If you have never tried putting mole skin on the comb of your rifle I recommend it makes it nice and comfy.

Here is how the gun mounts up. I also have a set of SlingStix on it as a poor mans bipod.



These pictures are also a good example of why some animals eat their young ;D
Logged
From the halls of Montezuma

Offline kbstenberg

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 151
Re: Had some Handi project time.
« Reply #3 on: January 02, 2011, 02:03:00 PM »
  How come it is on the wrong side?
  Kevin
Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #4 on: January 02, 2011, 02:20:49 PM »
Quote from: kbstenberg on January 02, 2011, 02:03:00 PM
  How come it is on the wrong side?
  Kevin

Because I shoot with the correct (i.e. my right) hand. ;)
Logged
From the halls of Montezuma

Offline Quigley

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: Had some Handi project time.
« Reply #5 on: January 02, 2011, 03:51:27 PM »
Looks good. Are you shootin out the TV while watching Dancein with the Stars? ;D
Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #6 on: January 02, 2011, 05:01:56 PM »
Nah Desperate House Wives ;D ;D
Logged
From the halls of Montezuma

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: Had some Handi project time.
« Reply #7 on: January 02, 2011, 07:18:51 PM »
We should'a traded, I was looking for something with a low comb so I could shoot my 357 with iron sights.
Logged

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Had some Handi project time.
« Reply #8 on: January 03, 2011, 01:58:25 AM »
Looks like that gets you on line with the scope.
That is a Desperate Housewife color ;D

I like the green camo paint job. Is that digital camo (tape)?
Never seen that is stores.

What scope is that. I like the size ;)
What caliber?

Thanks!
Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #9 on: January 03, 2011, 09:18:23 AM »
Yes it is digital camo tape. I have forgotten the name of the stuff. I bought it on base awhile ago. It is the same stuff that they use in hospitals.
The scope is a cheap NCStar 4X nothing fancy but it has help up well. The gun is in .308.

bigvarmint what part of NE Indiana are you. I am up in Auburn.
Logged
From the halls of Montezuma

Offline bigbird09

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 359
  • Gender: Male
Re: Had some Handi project time.
« Reply #10 on: January 03, 2011, 08:24:43 PM »
awesome Idea,  how did you get the nuts into the stock? also what bout using a course threaded screw like a wood screw?

And on that wrap  you can get it at cheaper than dirt, and it only sticks to itself.
Here: http://www.cheaperthandirt.net/GNS314-1.html
Logged
When guns are outlawed, only outlaws will have guns.

novice shooter, gunsmith, reloader, that is always open to help, tips, and tricks.

Malin v17/.17HMR, Handi-rifle/.223, Mossburg 500A/12g, Winchester 1300/20g, CVA eclipse magnum/.50

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #11 on: January 04, 2011, 04:15:52 PM »
That's the stuff thanks for the link ;D

As to how I got the nuts on the inside. The stock is hollow so all I did was remove the but plate and reach in with a pair of needle nose pliers to get them threaded on the bolts. As far as wood screws I imagine they would work fine I just didn't think about them at the time. I am in the process of repainting the gun I will put up new pic's when I am done.
Logged
From the halls of Montezuma

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: Had some Handi project time.
« Reply #12 on: January 05, 2011, 04:40:57 AM »
Decent MkI cheekpiece! Hit the local auto salvage yard and start looking at plastic car parts, even the pulled plastic gas tanks, for something with the curve(s) and thickness you want.  If you can beg or borrow a cordless 'sawzall' type tool you can cut a chunk out on the spot.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #13 on: January 05, 2011, 03:30:35 PM »
gcrank I will keep that in mind for next time. The steel I had on hand so used it out of convenience.

Here are some updated pics now that I had some time to get paint on it.



I had to get this on the gun some where. ;) ;D
Logged
From the halls of Montezuma

Offline Lon371

  • GBO Supporter
  • Trade Count: (53)
  • Senior Member
  • *****
  • Posts: 2486
  • Gender: Male
  • Why Not a Handi?
Re: Had some Handi project time.
« Reply #14 on: January 05, 2011, 04:13:23 PM »
 That turned out nice. Good job!

Lonny
Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #15 on: January 05, 2011, 04:47:13 PM »
Thanks Lonny ;D
Logged
From the halls of Montezuma

Offline bigvarmnt

  • GBO Supporter
  • Trade Count: (56)
  • Senior Member
  • *****
  • Posts: 1641
  • Gender: Male
  • N. E. Indiana
Re: Had some Handi project time.
« Reply #16 on: January 05, 2011, 06:15:02 PM »
You da Camo Man ;) Looks good.

Think you could do that to my Jeep ;D

Hey, keep an eye out, I saw approx. 30 Turkeys today out my front window heading your way 8)

Logged

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Had some Handi project time.
« Reply #17 on: January 06, 2011, 11:52:07 AM »
It could be done but man that is gonna be alot of krylon. ;D ;D

Neat on the turkey. I see deer and turkey all the time on the property across the road from me to bad I can't get access to hunt it. :(
Logged
From the halls of Montezuma
Pages: [1]   Go Up
« previous next »