Author Topic: New Accessory Barrels Available! (Read 29781 times)

quickdtoo · « **on:** January 06, 2011, 09:06:29 AM »

Unfortunately H&R no longer offers any accessory barrels other than those listed on the accessory barrel web page, any barrels listed below that aren't on the H&R site are only available for repair/replacement..

http://www.hr1871.com/support/accessoryprogram.asp

The Talo Trapper 357 and 44 mag barrels are now available as accessory barrels, I don't know the price, but here are the part numbers and description.

Tim

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635 $135

44mag 18¾" blued, w/sights, drilled and tapped for scope base, part# F403634 $135

35 Rem. blue std.contour 22" drilled & tapped for scope base, part# F404489 $96.00.

222 Rem 22" drilled & tapped for scope base Part# F404329.

35 Whelen 22" drilled & tapped for scope base, part# FR03702

35 Whelen 22" drilled & tapped for both sights & scope base, Part# F404326.

45-70 18¾" drilled and tapped with sights part# F403633 $135

45-70 24" Stainless(Ultra Hunter) drilled and tapped for scope base Part# FR04096 $131

50 cal Huntsman 26", blued, drilled and tapped for scope base, breech plug & breech plug wrench, front & rear sights, ram rod, forend, and 5 primer carriers kit #F50M $145

50 cal Sidekick 26" Stainless with ramrod, forend, breech plug, (5) primer carriers, fire sights, drilled & tapped for scope base. Note: this barrel will only fit the short sidekick frame. Part# FM03369 $148

7.62X39 22" drilled and tapped part# FR03490

7mm-08, 20" light drilled & tapped for scope base part# F404488 NEW as of 4/7/2011

Catshooter45 · « **Reply #1 on:** January 06, 2011, 10:03:52 AM »

Thanks for the update Tim. Do you know the contour? Are they heavy or what?

Cat

Lon371 · « **Reply #2 on:** January 06, 2011, 10:14:49 AM »

One of the local gun shops has one advertised(complete rifle) on his website $214. I was going to call momma said I was on hold

http://www6.davidsonsinc.com/consumers/subsites/featured_items.asp?ID=824&table=dealer_prices

Lonny

quickdtoo · « **Reply #3 on:** January 06, 2011, 10:21:19 AM »

Bud's had the 44mag Trapper for $201 shipped last week, they have standard contour barrels.

Tim

http://www.budsgunshop.com/catalog/product_info.php/cPath/263/products_id/69851

xhare · « **Reply #4 on:** January 06, 2011, 10:31:01 AM »

Do they have sights, or just set up for sights?

DARKCLOUD · « **Reply #5 on:** January 06, 2011, 10:34:52 AM »

what is the difference in talo trapper and reg barrell?
will they still fit sb frames?
thanks
mark

quickdtoo · « **Reply #6 on:** January 06, 2011, 10:36:25 AM »

Quote from: xhare on January 06, 2011, 10:31:01 AM

Do they have sights, or just set up for sights?

They have sights.

Tim

quickdtoo · « **Reply #7 on:** January 06, 2011, 10:38:44 AM »

Quote from: DARKCLOUD on January 06, 2011, 10:34:52 AM

what is the difference in talo trapper and reg barrell?
will they still fit sb frames?
thanks
mark

Trapper barrels are 18¾" long and have sights and are drilled and tapped for a scope base, standard Handi barrels are 22" long and only come with a scope base, the 357 and 44mag barrels can be fitted to SB1 or SB2 frames.

Tim

DARKCLOUD · « **Reply #8 on:** January 06, 2011, 10:41:45 AM »

TIM
u the man
thanks
mark

1NEFsofar · « **Reply #9 on:** January 07, 2011, 02:45:24 AM »

Hey! SHHHHHHHHHHHHH. Let's keep this quiet until I get one!!!!

petemi · « **Reply #10 on:** January 07, 2011, 03:45:22 AM »

I could get tempted to send in a SB2 frame, get a .44 Trapper and ream it to .445 and end the overbore problem.....but.....then....on the otherhand, since I reload, the overbore isn't much of a problem. Whataya think Tim?

Pete

gcrank1 · « **Reply #11 on:** January 07, 2011, 05:00:32 AM »

You only ask because you know we are going to urge restraint, right?

petemi · « **Reply #12 on:** January 07, 2011, 05:14:36 AM »

Quote from: gcrank1 on January 07, 2011, 05:00:32 AM

You only ask because you know we are going to urge restraint, right?

Yeah, sure. What's restraint?

Pete

quickdtoo · « **Reply #13 on:** January 07, 2011, 05:33:33 AM »

Quote from: petemi on January 07, 2011, 03:45:22 AM

I could get tempted to send in a SB2 frame, get a .44 Trapper and ream it to .445 and end the overbore problem.....but.....then....on the otherhand, since I reload, the overbore isn't much of a problem. Whataya think Tim?

Pete

If'n I was tempted to order accessory barrels, I'd order more than one at a time to make the shipping cost worth while.

Tim

PHATINJUN · « **Reply #14 on:** January 07, 2011, 08:32:34 AM »

Tim are the ones that come with just the scope mount and no sights are the scope mounts welded /soldered or are they drilled and tapped?? Kurt

petemi · « **Reply #15 on:** January 07, 2011, 08:41:52 AM »

Kurt, I'm not positive about it today, but in the past they've been drilled and tapped.

Tim, You're bad. Now I'm thinking of sending in 3 frames and getting the .44 Trapper, the .444 and the .500. Patty's gonna kill me. Can anyone tell me what I need them for? It's just WANT, WANT.....the addiction again. Everyone knows my .45-70 will do everything the other three will.

Pete

quickdtoo · « **Reply #16 on:** January 07, 2011, 08:56:25 AM »

Quote from: PHATINJUN on January 07, 2011, 08:32:34 AM

Tim are the ones that come with just the scope mount and no sights are the scope mounts welded /soldered or are they drilled and tapped?? Kurt

To my knowledge, only rifled shotgun barrel scope rails are soldered/welded, all rifle scope rails are mounted with screws.

Tim

quickdtoo · « **Reply #17 on:** January 07, 2011, 08:57:23 AM »

Quote from: petemi on January 07, 2011, 08:41:52 AM

Tim, You're bad. Now I'm thinking of sending in 3 frames and getting the .44 Trapper, the .444 and the .500. Patty's gonna kill me. Can anyone tell me what I need them for?
Pete

What's NEED have to do with it!!

Tim

gcrank1 · « **Reply #18 on:** January 07, 2011, 09:21:05 AM »

Now Pete, this IS the USA, where it is not just 'need' that we strive for, but Life, Liberty, AND the pursuit of Happiness.

FWIW, Col. Jeff Cooper once said (paraphrased)," it is a sin to covet what you have no use for"; does that help?

quickdtoo · « **Reply #19 on:** January 10, 2011, 06:49:56 AM »

Here's the updated list of new barrel offerings from H&R, be aware that they may not have all in stock.

Tim

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635

44mag 18¾" blued, w/sights, drilled and tapped for scope base, part# F403634

35 Rem. blue std.contour 22" drilled & tapped for scope base, part# F404489 $96.00.

222 Rem 22" drilled & tapped for scope base Part# F404329.

35 Whelen 22" drilled & tapped for scope base, part# FR03702

35 Whelen 22" drilled & tapped for both sights & scope base, Part# F404326.

45-70 18¾" drilled and tapped with sights part# F403633

50 cal Huntsman 26", blued, drilled & tapped for scope base, breech plug & breech plug wrench, front & rear sights, ram rod, forend, and 5 primer carriers $96 kit #F50M

7.62X39 22" drilled and tapped part# FR03490

Dinny · « **Reply #20 on:** January 10, 2011, 12:53:29 PM »

Oh no, I gotta have a 35 cal everything. The one I'm missing is 35 Rem. Not for long....

Thanks, Dinny

gendoc · « **Reply #21 on:** January 10, 2011, 01:07:35 PM »

do they have a new order form ?? or just use the old one....
thank ya

quickdtoo · « **Reply #22 on:** January 10, 2011, 01:14:24 PM »

Just use the one on the acc barrel page, they all be write in votes!!

Tim

diddlyv · « **Reply #23 on:** January 10, 2011, 02:41:26 PM »

Just looked at the papers that came with my CR 45LC both the 45/70 buff Classic and the 38/55 are available at 110 a pop, not to shabby

quickdtoo · « **Reply #24 on:** January 10, 2011, 03:44:56 PM »

That's an obsolete acc barrel pamphlet, the 45-70 BC barrel is $120, the 45LC barrel is discontinued, the last time the 38-55 was made was in 2007, discontinued for 2008, see the website. Your CR-45 is a couple years old, look at the serial number prefix and compare it to the mfr year list in the FAQs, I think 2008 was the last year it was made.

Tim

http://www.hr1871.com/Support/accessoryProgram.asp

mauser98us · « **Reply #25 on:** January 10, 2011, 04:53:42 PM »

Who did they make a 222 for?

quickdtoo · « **Reply #26 on:** January 10, 2011, 05:33:35 PM »

Us!

RemingtonMagnum · « **Reply #27 on:** January 10, 2011, 05:42:05 PM »

Quote from: quickdtoo on January 06, 2011, 10:21:19 AM

Bud's had the 44mag Trapper for $201 shipped last week, they have standard contour barrels.

Tim

http://www.budsgunshop.com/catalog/product_info.php/cPath/263/products_id/69851

I may be incorrect but (Buds) they may be a SB1 rec.

Don Jackson Remington Magnum/Ultramag

msc8127 · « **Reply #28 on:** January 10, 2011, 06:31:43 PM »

I've got to get ahold of a new handi in 35 whelen. I've wanted a whelen for a good while but haven't been able to find one when I've had any spare cash. I'd been wanting to "hop-up" the 30-06 lately, but, the whelen should fit the bill for something with a little more bang. I have the 30-06 down to the point where it just needs some experimentation in the reloading department, and started this evening on my 270's forend and trigger improvements. Might as well add the whelen into the mix. The 270 and 30-06 overlap each other a good bit, but the whelen should be a step above the two of them out to 300 yds or so, which is pretty much all i'm good for anyway!

quickdtoo · « **Reply #29 on:** January 10, 2011, 07:25:22 PM »

Quote from: RemingtonMagnum on January 10, 2011, 05:42:05 PM

Quote from: quickdtoo on January 06, 2011, 10:21:19 AM
Bud's had the 44mag Trapper for $201 shipped last week, they have standard contour barrels.

Tim

http://www.budsgunshop.com/catalog/product_info.php/cPath/263/products_id/69851

I may be incorrect but (Buds) they may be a SB1 rec, look at the model number, SB1-44T.

Don Jackson Remington Magnum/Ultramag

Not may be, the ONLY frame the 44mag comes on is an SB1, been that way since 2008.

Tim