Author Topic: New Accessory Barrels Available! (Read 29840 times)

Singlepopper · « **Reply #30 on:** January 11, 2011, 10:51:30 AM »

Are they still not fitting barrels to rifles with NM prefixes? They don't say anything about that in their information, as what's listed in red on the FAQ.

quickdtoo · « **Reply #31 on:** January 11, 2011, 01:04:53 PM »

The info in the FAQ is still valid, they will only fit '96-'99 SB2 frames with 357mag, 44mag and shotgun barrels, they also won't fit any high pressure * marked(on the acc barrel list) barrels to SB2 frames made prior to 2000.

Tim

lee1954 · « **Reply #32 on:** January 11, 2011, 01:40:30 PM »

Is the 222 replacing the 22 hornet?? Or is the 22H still in the lineup ------ I like the 222 --
It is a good cast bullet shooter... as well as Jacketed... hope to get my pennys lined up befor things change again Dan

quickdtoo · « **Reply #33 on:** January 12, 2011, 08:06:39 AM »

The Hornet is still available as an accessory barrel at this time, they have about 3 dozen barrels in stock as of this morning, 22" blue standard barrel, drilled & tapped for scope base, part# F224, probably $96 like all the other standard barrels. For how long they don't know, there have been chamberings that were discontinued as complete rifles before, but were still offered as accessory barrels for years, the 357mag was discontinued as a rifle for many years, but was always available as an accessory barrel, the 450 Marlin was the same way until it was totally discontinued when they ran out of acc barrels a year or two ago. Why they made the 222 Rem, no one knows, they just showed up in Ilion, who or why they were ordered is a mystery to H&R service.

Tim

fbates · « **Reply #34 on:** January 12, 2011, 10:59:36 AM »

I called H&R last week and they said the 35 whelen 22" barrel not available. I have a handi 45/70 and want to get the 35 whelen barel. are pretty sure the 35 whelen barrel avail?

quickdtoo · « **Reply #35 on:** January 12, 2011, 11:20:48 AM »

Same applies to either of the 35 Whelen barrels, you talked to Madison CS, the barrels are in Ilion NY.

Tim

http://www.gboreloaded.com/forums/index.php/topic,223049.msg1099239187.html#msg1099239187

Quote from: quickdtoo on January 12, 2011, 09:54:00 AM

Send it in with a credit card number or check for the expected amount of $96 on the barrel, they'll let you know if the need more money on the check, H&R CS in Madison doesn't have a clue about those barrels for some reason, even the employees in Ilion where the barrels are fitted don't know why either, but the info I've supplied is accurate. They had 37 of the 18¾" 45-70 trapper barrels in stock on 12/14/2010, no guarantee how many they have now, so if you want one, better go for it now, or you certainly won't get one. Two members have order barrels that don't exist according to Madison, one a Huntsman, the other a 35 Rem, both have received their barrels.

Tim

http://www.gboreloaded.com/forums/index.php/topic,224285.msg1099237472.html#msg1099237472

fbates · « **Reply #36 on:** January 12, 2011, 03:41:31 PM »

thanks for the reply. so, I hand write in on the order form:

35 Whelen 22" drilled & tapped for scope base, part# FR03702
send my receiver and this will get me a 35 whelen handi, Kool

I've had my 45-70 for i think 3 years and it mis fires every so often, can i write this on the form to upgrade the trigger as i've heard they've been fixing for some rifles?

quickdtoo · « **Reply #37 on:** January 12, 2011, 06:11:35 PM »

I'd put the misfire info on the form, but I'd also put a tag on the trigger guard so the gunsmith will be sure to see it, that used to work at Gardner I think, maybe Brian will offer advice.

Tim

OldSchoolRanger · « **Reply #38 on:** January 19, 2011, 06:54:12 AM »

Quote from: quickdtoo on January 06, 2011, 09:06:29 AM

The Talo Trapper 357 and 44 mag barrels are now available as accessory barrels, I don't know the price, but here are the part numbers and description.

Tim

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635

44mag 18¾" blued, w/sights, drilled and tapped for scope base, part# F403634

35 Rem. blue std.contour 22" drilled & tapped for scope base, part# F404489 $96.00.

222 Rem 22" drilled & tapped for scope base Part# F404329.

35 Whelen 22" drilled & tapped for scope base, part# FR03702

35 Whelen 22" drilled & tapped for both sights & scope base, Part# F404326.

45-70 18¾" drilled and tapped with sights part# F403633

50 cal Huntsman 26", blued, breech plug & breech plug wrench, front & rear sights, ram rod, forend, and 5 primer carriers $96 kit #F50M

Tim, I'm new to this forum, but I appreciate the information. The question I have is how do I order the 50 cal Huntsman barrel? I called H&R 1871 about a week ago, and checked their website. On the website, it stated that the black powder barrels are not available at this time. When I called them, they told me the same thing. Am I calling the wrong company? Meaning should I be calling NEF, Remington, or H&R 1871, instead? Any help would be appreciated. I have been trying to get either a Sidekick muzzle loader, or a Huntsman barrel for my Handi-rifle, or Pardner frame, for quite a while now. If I can't get one, I may eventually have to break down and pick up a NEF Handi-rifle lookalike, like the CVA Wolf.

quickdtoo · « **Reply #39 on:** January 19, 2011, 07:01:11 AM »

Welcome! Read reply #35, including the links to other discussions.

Tim

wganz · « **Reply #40 on:** February 01, 2011, 01:40:37 PM »

Quote

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635

Am going to send my receiver in on Friday for a .223 Bull Barrel and this barrel.

Is this barrel $96.00 ?

quickdtoo · « **Reply #41 on:** February 01, 2011, 03:25:00 PM »

Dunno for sure, but more than likely, if it's wrong they'll let ya know.

Tim

AA080 · « **Reply #42 on:** February 03, 2011, 05:35:01 PM »

I called today on the 18 3/4" .45-70 and .357 and the lady said neither were available anymore

So....I bought two Talo's from Davidsons, that'l learn 'em!

srussell · « **Reply #43 on:** February 03, 2011, 07:53:59 PM »

quick did i see were you sad you could just send the recever and have a barrel fitted. because i will change stock and for end soon

quickdtoo · « **Reply #44 on:** February 03, 2011, 08:14:53 PM »

Yes, that's all I ever sent in, just order a stock set too. A frame can be shipped for $5 in a small flat rate priority mail box, add a couple $ for insurance.

Tim

srussell · « **Reply #45 on:** February 03, 2011, 08:30:06 PM »

hey quick what i meant was do i have to order a stock are will they just fit the barrel to the frame i don't need a stock

quickdtoo · « **Reply #46 on:** February 03, 2011, 08:36:14 PM »

I dunno, try it and see what happens, I know some members didn't send stock sets to Gardner to avoid damage in fitting and shipping and it worked, but I dunno if Ilion will, they might charge for installing and removing the stock for test firing it, maybe Brian can answer that question.

Tim

srussell · « **Reply #47 on:** February 03, 2011, 08:41:19 PM »

how to get hold of Brian

Gaz-52 · « **Reply #48 on:** February 12, 2011, 02:05:27 AM »

THIS THREAD stinks ! You guys have got it easy . Here in Aus if we want an accessory barrel for a Handy we have two options. buy a used Handi barrel (rare as rocking horse s#*@t ), or make one from another "donor" rifle barrel. I want a 7.62x39 barrel to add to my SB2 .22 hornet. Luckily .303 barrels are plentiful and suit the short Russian perfectly . I just have to make the rest of the bits.

And my Missus wonders why I spend so much time in my shed .

coyoteshooter · « **Reply #49 on:** February 23, 2011, 05:46:09 AM »

Does anyone know if the buffalo classic 45-70 32" barrel is available and will it fit on an Ultra hunter??

quickdtoo · « **Reply #50 on:** February 23, 2011, 06:42:45 AM »

It will work on any H&R SB2 frame made since 1987, although they won't fit one to any frame made 1996-1999, give em a call to find out if they have any, (866)776-9292.

Tim

hunter63 · « **Reply #51 on:** March 04, 2011, 09:59:25 AM »

I stopped by their web site today.
Doesn't seem to have changed much since last year, except a few more are listed as not available.

So I guess my question, is where did y'all get your information.
A call to the number listed?

VT30-30 · « **Reply #52 on:** March 04, 2011, 10:51:45 AM »

I called Cust. Service 2 days ago, as I wanted a new style syn. stock. Got the correct part numbers, prices for stocks.
I then asked if they had any 357 Mag. barrels in either 22 or 183/4 inch barrels, to which the rep said none in stock.
So this morning sent in frame for stocks and hopefully a 357 Mag barrel. I put down first and second choice. Now the
waiting begins.

hunter63 · « **Reply #53 on:** March 05, 2011, 07:12:57 AM »

Quote from: VT30-30 on March 04, 2011, 10:51:45 AM

I called Cust. Service 2 days ago, as I wanted a new style syn. stock. Got the correct part numbers, prices for stocks.
I then asked if they had any 357 Mag. barrels in either 22 or 183/4 inch barrels, to which the rep said none in stock.
So this morning sent in frame for stocks and hopefully a 357 Mag barrel. I put down first and second choice. Now the
waiting begins.

So, my guess here is to call customer service, see what's available?

Been looking to pick up a .35 Whelen ever since I backed off on my last order in 2003, 10 barrels, .........then it went missing.

Jason F · « **Reply #54 on:** March 16, 2011, 07:24:58 AM »

why dont they show all of these new barrels on the h and r website in the accessory program,do they make any barrel 375 caliber

quickdtoo · « **Reply #55 on:** March 16, 2011, 08:55:40 AM »

That's a good question, they've been told about it more than once!

There are no .375" chamberings, the discontinued 38-55 is as close as they've made, it requires at much bigger bullets to shoot well, .379" jacketed or .380" and bigger cast.

Tim

quickdtoo · « **Reply #56 on:** April 07, 2011, 06:00:08 AM »

Here's another new barrel offering.

Tim

7mm-08, 20" light drilled & tapped for scope base part# F404488

44 Man · « **Reply #57 on:** April 07, 2011, 09:24:21 AM »

A 7-08 lightwt barrel is something I could get excited about! Darn you Tim!

44 Man

quickdtoo · « **Reply #58 on:** April 07, 2011, 11:16:25 AM »

I just sent a frame off for one!!

Tim

oldsoldja · « **Reply #59 on:** April 24, 2011, 12:40:16 AM »

I just sent two to get two barrels each. one is getting 35 rem and a fluted 243, the other is 7.62x39 and a 243 fluted. We will see how that goes.