Author Topic: New Accessory Barrels Available! (Read 29782 times)

pelican717 · « **Reply #60 on:** April 26, 2011, 12:42:08 AM »

I just got my ordered barrels in after a 7 week wait. Sent in a 45-70 receiver and ordered a 45-70, a 44mag, and 2 357mag barrels, all in 18 3/4" length.
The 45-70 and 44mag barrels were priced at $96.00 each ,plus $25.00 each for fitting. However, and I was shocked at this, the 357 barrels were priced at $135.00 each, plus $25.00 each
for fitting.
I sent Remington an email asking why the big price difference. Their reply was"The 357 has lower demand and is produced in smaller numbers. The 357 barrel also has sights (as does the 44 mag barrel) but again this is in production numbers. The 45-70 does not have sights." From Danny.
The 4 barrels I got back ALL have sights, and ALL are D & T for scope rails.
Seems CS has failed us again.
Just an FYI.
Thanks, Robert

gcrank1 · « **Reply #61 on:** April 26, 2011, 04:49:41 AM »

I guess I have come to conclude that trusting a CSR is a crap shoot anyway. Call five times and go with the two answers that most closely match doesn't give much confidence.
Sights cost so that really does account for a higher price. Sounds like a nice bunch of barrels, hope they all work well!
BTW, when you cost average them you're at $140ish/@, or do you have S&H too?

pelican717 · « **Reply #62 on:** April 28, 2011, 12:31:41 AM »

Gcrank1, they only charged me one shipping fee of $19.00, even though their were two boxes. Lucky for me, I guess.
Robert

nanuk-O-dah-Nort · « **Reply #63 on:** June 12, 2011, 07:02:16 AM »

you guys are so lucky

is there any way a Canadian can get one of these in Canada? Shipping across the border is not an option due to cost.

quickdtoo · « **Reply #64 on:** June 12, 2011, 08:14:29 AM »

Welcome nanuk-O-dah-Nort! Unfortunately no on accessory barrels, they'd only be available there as a complete firearm if H&R exports them, the accessory barrel program is available only in the US, you might contact the Canadian repair source and see if they have any recommendations tho, maybe they can help.

Several members here have bought and sold second hand barrels across the border tho, one just recently, so buying a used barrel in the H&R Classifieds might be an option for you, barrel fitting is covered in the FAQs and Help sticky which is mandatory reading for anyone with any interest in H&R single shots.

Tim

http://hr1871.com/Support/accessoryProgram.asp

http://hr1871.com/Support/repairs.asp

quickdtoo · « **Reply #65 on:** July 06, 2011, 07:24:57 AM »

SS 45-70 Ultra Hunter barrel added.

Tim

quickdtoo · « **Reply #66 on:** July 07, 2011, 05:35:56 AM »

SS Sidekick muzzleloader barrel added.

Tim

dave29 · « **Reply #67 on:** July 18, 2011, 09:19:54 AM »

Getting ready to send in for a 7.62x39 and an 18.75" 45/70. Anyone heard recently if they have any or not?

It does no good calling.

quickdtoo · « **Reply #68 on:** July 18, 2011, 09:39:17 AM »

That would be a good question to ask Brian56.

Tim

dave29 · « **Reply #69 on:** July 18, 2011, 01:05:35 PM »

Quote from: quickdtoo on July 18, 2011, 09:39:17 AM

That would be a good question to ask Brian56.

Tim

I didn't want to bother him, but I sent a pm.

FP1201 · « **Reply #70 on:** July 28, 2011, 03:43:40 PM »

Quote from: fbates on January 12, 2011, 10:59:36 AM

I called H&R last week and they said the 35 whelen 22" barrel not available. I have a handi 45/70 and want to get the 35 whelen barel. are pretty sure the 35 whelen barrel avail?

FWIW: My best friend works at Remington in Ilion; I had a .35 Whelen barrel fitted there and he told me (he was told by the old guy that came over from the Mass. plant) that "you got the very last .35 Whelen barrel we had" While I don't remember exactly how long ago that was, I'm thinking it was only a year ago.

quickdtoo · « **Reply #71 on:** July 28, 2011, 04:06:50 PM »

Well, that would be old news cuz members here have had 35 Whelen barrels fitted in the last six months, Papa Jack in March for one, they had about three dozen 35 Whelen barrels in stock as of December 22, 2010. Considering the Whelen is a big seller in Mississippi, I seriously doubt they'll ever be out of em for long if they ever are.

Tim

http://www.budsgunshop.com/catalog/product_info.php/products_id/61736

http://www.budsgunshop.com/catalog/product_info.php/products_id/63962

http://www.budsgunshop.com/catalog/product_info.php/products_id/64277

Quote from: quickdtoo on January 06, 2011, 09:06:29 AM

The Talo Trapper 357 and 44 mag barrels are now available as accessory barrels, I don't know the price, but here are the part numbers and description.

Tim

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635

44mag 18¾" blued, w/sights, drilled and tapped for scope base, part# F403634

35 Rem. blue std.contour 22" drilled & tapped for scope base, part# F404489 $96.00.

222 Rem 22" drilled & tapped for scope base Part# F404329.

35 Whelen 22" drilled & tapped for scope base, part# FR03702
35 Whelen 22" drilled & tapped for both sights & scope base, Part# F404326.
45-70 18¾" drilled and tapped with sights part# F403633

45-70 24" Stainless(Ultra Hunter) drilled and tapped for scope base Part# FR04096 $131

50 cal Huntsman 26", blued, drilled and tapped for scope base, breech plug & breech plug wrench, front & rear sights, ram rod, forend, and 5 primer carriers kit #F50M

50 cal Sidekick 26" Stainless with ramrod, forend, breech plug, (5) primer carriers, fire sights, drilled & tapped for scope base. Note: this barrel will only fit the short sidekick frame. Part# FM03369 $148

7.62X39 22" drilled and tapped part# FR03490

7mm-08, 20" light drilled & tapped for scope base part# F404488 NEW as of 4/7/2011

Rotten RJ · « **Reply #72 on:** August 03, 2011, 09:40:20 AM »

I just received an accessory barrel in 35 Whelen last month (20 July). I checked with Brian56 prior to sending in my frame and he gave no indication of them being short on supply. A quick turnaround time of 14 days!
RJ

ibgp3 · « **Reply #73 on:** September 18, 2011, 02:34:23 AM »

Quote from: quickdtoo on February 03, 2011, 08:36:14 PM

I dunno, try it and see what happens, I know some members didn't send stock sets to Gardner to avoid damage in fitting and shipping and it worked, but I dunno if Ilion will, they might charge for installing and removing the stock for test firing it, maybe Brian can answer that question.

Tim

I didn't see an answer posted, I don't need a stock set, but I would sure like to send just the receiver.

ibgp3 · « **Reply #74 on:** October 07, 2011, 05:10:39 AM »

I got the go ahead from Brian, just the receiver is okay.
WOW!!
$5.12 to ship the receiver in a small flat rate box. No extra labor cost, and a whole lot less packing!!
$156 and change total and a 2 week turn around for a factory fitted barrel.
...sent it on a Tuesday and got it back 2 weeks and 1 day later!!

tacklebury · « **Reply #75 on:** October 15, 2011, 11:35:07 AM »

Nice.

Now if they just would make a few versapak .22's hehe.

cnymuzguy · « **Reply #76 on:** October 24, 2011, 05:49:18 PM »

Do they keep the barrels at the Ilion, NY plant? If so, can you take the gun there to have them fit the barrel? I only live an hour away from the plant.

Mitch

tacklebury · « **Reply #77 on:** October 24, 2011, 05:51:56 PM »

Quote from: cnymuzguy on October 24, 2011, 05:49:18 PM

Do they keep the barrels at the Ilion, NY plant? If so, can you take the gun there to have them fit the barrel? I only live an hour away from the plant.

Mitch

Save some time and PM Brian56 as he has been helping in this area a bunch.

turkey hunter · « **Reply #78 on:** December 01, 2011, 05:41:55 AM »

Tim:
Where can you obtain these barrels? I have called H&R and sent a note to Remington and they are not familiar with them. Thanks for the help-Ed

quickdtoo · « **Reply #79 on:** December 01, 2011, 05:46:14 AM »

Welcome! Follow tacklebury's advice in the previous reply.

Tim

turkey hunter · « **Reply #80 on:** December 01, 2011, 03:28:50 PM »

how do I contact him, can't determine exactly where he is

tacklebury · « **Reply #81 on:** December 01, 2011, 04:13:59 PM »

Turkey Hunter: Towards the top of the screen you will see something saying My Messages. Hover over this and then once it loads, click on the drop down Send Message and type Brian56 in the TO: line.

turkey hunter · « **Reply #82 on:** December 02, 2011, 04:19:04 AM »

Tackleberry:
Thanks for the assist as I am technically challenged for sure.

The Pistoleer · « **Reply #83 on:** April 04, 2012, 04:14:38 PM »

I have been a Graybeard for several years but haven't visited this board. I have a Handi Rifle in 243 and was looking to get a 308 barrel for it. I guess they don't have them available?

I really want a 300 Blackout but I can't find out where to get one?

Pete

quickdtoo · « **Reply #84 on:** April 05, 2012, 06:27:13 AM »

You'd have to check on availability of the 308 Win barrels with H&R, the 300BLK is not available as an accessory barrel, only as a complete firearm thru AAC distributors.

Tim

http://www.hr1871.com/Support/accessoryProgram.asp

schuetzen · « **Reply #85 on:** April 12, 2012, 05:44:19 AM »

Quote from: quickdtoo on January 06, 2011, 09:06:29 AM

357mag 18¾" blued, w/sights, drilled & tapped for scope base, part# F403635 $135

44mag 18¾" blued, w/sights, drilled and tapped for scope base, part# F403634 $135

I called customer service today (4/12/2012) and they said they don't show any stock of these two barrels.

Dinny · « **Reply #86 on:** April 12, 2012, 05:49:55 AM »

That's a common story from CS. Just to be sure, I'd double check with Brian56.

Thanks, Dinny

quickdtoo · « **Reply #87 on:** April 12, 2012, 07:57:35 AM »

What Dinny said, Brian is always the man to contact for current availability and pricing, Madison CS doesn't always have the correct info, although they're working on it and they may well be out of them, afterall, this list is over a year old although it has been updated a couple times since, but not lately.

Tim

The Pistoleer · « **Reply #88 on:** April 24, 2012, 03:47:40 PM »

I have changed my mind and have decided to get a 44 magnum barrel. So what is the procedure? Do I have to call and tell them I am sending my action in? Do I remove the butt stock?

Pete

quickdtoo · « **Reply #89 on:** April 25, 2012, 04:57:54 AM »

Follow the instructions on the H&R website.

Tim

http://www.hr1871.com/Support/accessoryProgram.asp