« previous next »
Pages: [1]   Go Down

Author Topic: 77/22 Scope ring height  (Read 1521 times)

0 Members and 1 Guest are viewing this topic.

Offline DON IN VA

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 114
77/22 Scope ring height
« on: January 16, 2011, 12:08:44 PM »
I just acquired a 77/22 in 22 Hornet which came with high rings.  W/o taking them out of the blister package I'm thinking they look too high for mounting a 3 x 9 Leupold.  Does anyone know if there exists somewhere a chart showing which Ruger rings are needed for specific scopes?
I'd just open them up and try them but thought I might sell them if they are in fact too high and figured they'd bring a little more if unopened in the original packaging.
Logged
Temper is a quality that at a critical moment brings out the best in steel and the worst in people.

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: 77/22 Scope ring height
« Reply #1 on: January 16, 2011, 12:27:19 PM »
If they are new Ruger rings, still in the package, Ruger will swap them.
Their website had a downloadable catalog that gives the heights.
Some rifles use different sizes, so you may need to swap a 5 for a 3 and keep the 4.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.

Offline DON IN VA

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 114
Re: 77/22 Scope ring height
« Reply #2 on: January 16, 2011, 01:47:08 PM »
Quote from: PowPow on January 16, 2011, 12:27:19 PM
If they are new Ruger rings, still in the package, Ruger will swap them.
Their website had a downloadable catalog that gives the heights.
Some rifles use different sizes, so you may need to swap a 5 for a 3 and keep the 4.


Thanks PowPow,  the website provided exactly what I needed in the downloadable chart.  I may call them to inquire about the swap as well.
Logged
Temper is a quality that at a critical moment brings out the best in steel and the worst in people.

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: 77/22 Scope ring height
« Reply #3 on: January 16, 2011, 04:59:27 PM »
I recall them being very accomodating on the swap.
Seems like I gave them a credit card number; they shipped their rings; I recieved them and sent mine back in their box.
No charge/credit on the card that I recall.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 77/22 Scope ring height
« Reply #4 on: January 18, 2011, 05:44:23 AM »
That is good to hear; every set of Ruger rings with a rifle that Ive looked at have been too high for any of the scopes I want to use too. Looks like their default is to send the high expecting everyone to use the biggest objective lens scope available.
I want to get it down to just clearing the barrel by a decent bit, which puts my cheek in the right place on the comb.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: 77/22 Scope ring height
« Reply #5 on: January 18, 2011, 01:33:38 PM »
Here it is, on their website:

http://www.ruger.com/service/FAQs.html#Q104

select Parts & Accessories. its the 3rd question:

Can I exchange the Ruger scope rings that I received with my new gun for a different sized set?
If the gun was recently purchased and was purchased brand new, we will exchange the new, unused rings that were provided with that firearm with a new set of different model rings more suited to the scope selection. Please note that altered or used scope rings will not be exchanged. Click here for contact information.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.

Offline DON IN VA

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 114
Re: 77/22 Scope ring height
« Reply #6 on: January 21, 2011, 12:30:47 PM »
Quote from: PowPow on January 16, 2011, 04:59:27 PM
I recall them being very accomodating on the swap.
Seems like I gave them a credit card number; they shipped their rings; I recieved them and sent mine back in their box.
No charge/credit on the card that I recall.

I gave them a call Tuesday.  The lady I talked to took my name and address and said they'd ship me the rings I needed and all she asked was that I return the other rings to them when I'd received mine.  She asked for no credit card info or anything except my phone number.  She said they usually require the S/N of the rifle I was going to use them on but since I was calling from work and didn't have it available they would go ahead and send them w/o it.
She said they were about a week behind in shipping parts orders trying to catch up from the holidays but I could expect them within a couple weeks.
Logged
Temper is a quality that at a critical moment brings out the best in steel and the worst in people.

Offline PowPow

  • Trade Count: (16)
  • Senior Member
  • *****
  • Posts: 1838
  • Gender: Male
Re: Ruger Cust Service Good News Story
« Reply #7 on: January 21, 2011, 02:41:14 PM »
I might have dreamed the credit card part. I do recall they were way too easy to deal with.
Consider modifying the title of your original post to reflect their excellent service.
Logged
The difference between people who do stuff and people who don't do stuff is that the people who do stuff do stuff.

Offline DON IN VA

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 114
Re: 77/22 Scope ring height / RUGER response/service A1
« Reply #8 on: January 29, 2011, 01:54:28 PM »
Quote from: DON IN VA on January 21, 2011, 12:30:47 PM
Quote from: PowPow on January 16, 2011, 04:59:27 PM
I recall them being very accomodating on the swap.
Seems like I gave them a credit card number; they shipped their rings; I recieved them and sent mine back in their box.
No charge/credit on the card that I recall.

I gave them a call Tuesday.  The lady I talked to took my name and address and said they'd ship me the rings I needed and all she asked was that I return the other rings to them when I'd received mine.  She asked for no credit card info or anything except my phone number.  She said they usually require the S/N of the rifle I was going to use them on but since I was calling from work and didn't have it available they would go ahead and send them w/o it.
She said they were about a week behind in shipping parts orders trying to catch up from the holidays but I could expect them within a couple weeks.
Received a new set of med. height rings from Ruger exactly ONE week after placing this call.  All they requested is that I return the set I couldn't use back to them which cost me exactly $1.95 postage.  That's what I call a good deal.
Logged
Temper is a quality that at a critical moment brings out the best in steel and the worst in people.

Offline mudstud

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
Re: 77/22 Scope ring height
« Reply #9 on: February 01, 2011, 01:18:25 PM »
Please let us know how the medium rings work out on the 77/22.  Is your rifle the blued/walnut sporter type or one of the heavier barrel models?  Also, I'm assuming the Leupold 3-9 you are referring to is the VXII 3-9 Rimfire model.  Please clarify as I'm looking to buy a pair of 77/22's, probably tomorrow, a 77/22 R and a 77/22 RM, and my scope of choice is the Leupold 3-9 Rimfire.  Thanks!
Logged
Pages: [1]   Go Up
« previous next »