« previous next »
Pages: [1]   Go Down

Author Topic: H&R Website Frustration  (Read 1480 times)

0 Members and 2 Guests are viewing this topic.

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
H&R Website Frustration
« on: January 18, 2011, 05:19:56 PM »
I'm not sure why the accessory portion of the web site is not better set up?
I'm looking for a forearm and all I see listed is 4 butt stocks and guessing these are just the butt stocks.
Handi-Rifle™ Stocks (pistol grip)
Part # Description Price
S02164 Synthetic, recoil pad $37.00
How in blazes do you buy a forearm from the main source without knowing a part number? The above is not a complete set is it?
There doing themselves a disservice not having a better accessory page.
It's frustrating. I have my boxed receiver ready to ship out tomorrow for two barrles from the accessory program and want an extra
forearm. I would think in the long run it would be easier and more cost effective to have part number on the web rather than a CS
person call, asking what you want.
-gary
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R Website Frustration
« Reply #1 on: January 18, 2011, 06:15:03 PM »
Most of the part numbers are on the retail parts page of the FAQs, if that doesn't help, call em and ask, match it up by the model number of the complete rifle that has the stock you want.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: H&R Website Frustration
« Reply #2 on: January 18, 2011, 08:08:11 PM »
Thanks Tim. I was looking at all the links below it and didn't think to click on that!  :o
- gary
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: H&R Website Frustration
« Reply #3 on: January 18, 2011, 10:40:26 PM »
Gary!!

    handi grip stock, part# F302052,  button head stock bolt, part# FS03918, Forend, part#FR04089,




                                                                                                              Brian@Remington:
Logged
Brian@Remington

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: H&R Website Frustration
« Reply #4 on: January 18, 2011, 11:16:16 PM »
Quote from: Brian56 on January 18, 2011, 10:40:26 PM
Gary!!

    handi grip stock, part# F302052,  button head stock bolt, part# FS03918, Forend, part#FR04089,




                                                                                                              Brian@Remington:
Brian, What is the price on the above???
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: H&R Website Frustration
« Reply #5 on: January 19, 2011, 12:22:45 AM »



      stock, part# F302052, price= $ 35.00
      Forend, part# FR04089, price= $ 21.00
      stock bolt, part# FS03918, price= $ 3.00 - plus tax


                                                                                                         Brian@Remington:
Logged
Brian@Remington

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: H&R Website Frustration
« Reply #6 on: January 19, 2011, 12:35:10 AM »
Thank you Sir.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: H&R Website Frustration
« Reply #7 on: January 19, 2011, 02:54:32 AM »
Hey Brian, thank you for hanging around here.  It gives me a lot more faith in Big Green.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: H&R Website Frustration
« Reply #8 on: January 19, 2011, 06:00:00 AM »


   hi Pete!!
              I am just trying to help as much as I am allowed. I  am a big Handi fan myself.
I was trained back in Gardner Ma. and moved here with the company. At H&R Gardner, repairmen did not have access to computers like we do here in Ilion NY. So I was not able to help back then. I try to monitor GBO as mush as I can in between repairs during my breaks.


                                                                                                        Brian@Remington:
Logged
Brian@Remington

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: H&R Website Frustration
« Reply #9 on: January 19, 2011, 06:12:04 AM »
Brian, Thanks for the reply. What stock options are available now besides plain wood and syn?
Are there any Lam (Camo - Cinn) forends,. I see Lam thumbholes are still offered.
I hoping but not holding my breath on GrayGhost Lam or BumbleBee Lam coming back into style  ::)
Big Green should appoint someone to post a monthly accessory list here with part numbers.
A sales booster for sure.
Thanks again -gary
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: H&R Website Frustration
« Reply #10 on: January 19, 2011, 07:50:29 AM »
o.k. guys, here we go

  stock, MC cinn. lam. part# FS02452, forend, part# FR02332
  stock, MC cam. lam, part# FR01181, forend, "     "  FR01182
  stock, MC grey lam,  "     " FR01139, "                " FS01137
  stock, MC youth walnut finish, part# FR02619, forend, FS00886
  stock, trap,  part# FS04116, forend, part# FS04116
  stock, Topper Deluxe part# FS00979, forend, FS03373
  stock, topper (black matte) straight grip, part# FS00892, forend, FS00921
  stock, Infinity Syn, (real tree checkered) part# F404429, forend, F404430
  stock, Infinity syn. youth (""            ")  part# F404431, forend, F404430
  stock, adult squire cammo lam. part# FR01155, forend, FR01182
  stock, adult squire grey lam.  part# FS02447, forend, FS01137
I will up date more later as time permits o.k.

                                                                                                      Brian@Remington:


 
 
Logged
Brian@Remington

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: H&R Website Frustration
« Reply #11 on: January 19, 2011, 08:28:20 AM »
Quote from: Brian56 on January 19, 2011, 06:00:00 AM


   hi Pete!!
              I am just trying to help as much as I am allowed. I  am a big Handi fan myself.
I was trained back in Gardner Ma. and moved here with the company. At H&R Gardner, repairmen did not have access to computers like we do here in Ilion NY. So I was not able to help back then. I try to monitor GBO as mush as I can in between repairs during my breaks.


                                                                                                        Brian@Remington:
Brian,
I'm new to this forum, but Remington & NEF/H&R, are 2 of my favorites. I hope that the powers that be, appreciate your enthusiasm, and dedication. I hope they realize the advantage of a employee who helps like you do. I would have never known the BP barrels were available. I've been shopping for a used Huntsman or Sidekick for the longest.  I was even contemplating purchasing a CVA Wolf, which is similar.
I saw a couple of your posts in the barrel accessories thread. I am impressed, it's great to have someone that knows what's going on, and willing to share the information. I plan on ordering the 50 cal MZ barrels, soon as I can scrape up the cash. If you don't mind a question, how do I let them know that I want a MZ barrel with a scope base mounted. I also want the iron sights included, for the option of having the ability to remove the scope base, and use the sights when needed, to comply with different state regulations. In addition to the barrel order form, should I just write a letter explaining what I want? Thanks again.
"Tee"
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline Brian56

  • GBO Supporter
  • Trade Count: (5)
  • Member
  • *****
  • Posts: 62
  • Gender: Male
Re: H&R Website Frustration
« Reply #12 on: January 19, 2011, 08:48:55 AM »
Thank You Tee!!

 To you're question. just send in your stock & frame, with a letter requesting  a F50M barrel installed along with a scope base part# FR01331. the barrel already comes with it's own forend, ram rod, breech plug, breech plug wrench,  5 primer carriers, and sights.


                                                                                                Brian@Remington:
Logged
Brian@Remington

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R Website Frustration
« Reply #13 on: January 19, 2011, 10:04:19 AM »
Thanks Brian, I updated the retail parts page!!  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline blind ear

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 4156
  • Gender: Male
    • eddiegjr
Re: H&R Website Frustration
« Reply #14 on: January 19, 2011, 10:41:12 AM »
Thank you Brian!  ;D  ear
Logged
Oath Keepers: start local
-
“It is no coincidence that the century of total war coincided with the century of central banking.” – Ron Paul, End the Fed
-
An economic crash like the one of the 1920s is the only thing that will get the US off of the road to Socialism that we are on and give our children a chance at a future with freedom and possibility of economic success.
-
everyone hears but very few see. (I can't see either, I'm not on the corporate board making rules that sound exactly the opposite of what they mean, plus loopholes) ear
"I have seen the enemy and I think it's us." POGO
St Judes Childrens Research Hospital

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: H&R Website Frustration
« Reply #15 on: January 19, 2011, 01:27:40 PM »
Brian, Wow thanks for that update.. You are the man and thank you for sharing this information.
I just shipped my receiver today for a Talo 357mag and 35Rem in barrel accessory program.
Grey Lams in stock at this time  :o  :o  :o Outstanding! Would those be straight stock, Monte, or thumb hole?  ???
With this new information you provided, I"ll now just need to call customer service after I receive my order or repair number for one of those rare birds to be included. See, your making Big Green money already. Your not undercover boss are you?
Ilion needs more of you to go around and I think I can say your now a GB ambassador.

-gary


Quote from: Brian56 on January 19, 2011, 07:50:29 AM
o.k. guys, here we go

  stock, MC cinn. lam. part# FS02452, forend, part# FR02332
  stock, MC cam. lam, part# FR01181, forend, "     "  FR01182
  stock, MC grey lam,  "     " FR01139, "                " FS01137
  stock, MC youth walnut finish, part# FR02619, forend, FS00886
  stock, trap,  part# FS04116, forend, part# FS04116
  stock, Topper Deluxe part# FS00979, forend, FS03373
  stock, topper (black matte) straight grip, part# FS00892, forend, FS00921
  stock, Infinity Syn, (real tree checkered) part# F404429, forend, F404430
  stock, Infinity syn. youth (""            ")  part# F404431, forend, F404430
  stock, adult squire cammo lam. part# FR01155, forend, FR01182
  stock, adult squire grey lam.  part# FS02447, forend, FS01137
I will up date more later as time permits o.k.

                                                                                                      Brian@Remington:


 
 
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R Website Frustration
« Reply #16 on: January 19, 2011, 02:20:31 PM »
Gary, I think the squire is a straight stock, MC = monte carlo.  ;)
Tim

Quote from: Brian56 on January 19, 2011, 07:50:29 AM
o.k. guys, here we go

  stock, MC cinn. lam. part# FS02452, forend, part# FR02332
  stock, MC cam. lam, part# FR01181, forend, "     "  FR01182
  stock, MC grey lam,  "     " FR01139, "                " FS01137
  stock, MC youth walnut finish, part# FR02619, forend, FS00886
  stock, trap,  part# FS04116, forend, part# FS04116
  stock, Topper Deluxe part# FS00979, forend, FS03373
  stock, topper (black matte) straight grip, part# FS00892, forend, FS00921
  stock, Infinity Syn, (real tree checkered) part# F404429, forend, F404430
  stock, Infinity syn. youth (""            ")  part# F404431, forend, F404430
  stock, adult squire cammo lam. part# FR01155, forend, FR01182
  stock, adult squire grey lam.  part# FS02447, forend, FS01137
I will up date more later as time permits o.k.

                                                                                                      Brian@Remington:


 
 
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: H&R Website Frustration
« Reply #17 on: January 19, 2011, 04:34:49 PM »
Thanks Tim. I'll be calling Ilion on this new development soon. I've drooled for to many years after seeing pic's of your and CW's gray lams.
Now a bigger conundrum is what caliber to put it on?  ;D -g
Logged
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline goofyoldfart

  • grumpy old fart as well as goofy old fart.
  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 333
  • Gender: Male
Re: H&R Website Frustration
« Reply #18 on: January 19, 2011, 04:59:27 PM »
Brian: I just wanted to say thank you for going that extra mile for us handi guys and gals. I really do hope that your bosses can appreciate the fact that your willingness to give the info that we need and want (so we can BUY more stocks, barrels and rifles we want) makes a damn big difference in the service aspect. My daddy was a Ford Dealer and he always told me "son, you can buy a ford anywhere. It's your willingness to provide the service to the customer that they want and expect that brings them back." For my old man-- well, he was pretty smart. Keep up the good work, youngun'. your company has a diamond in your efforts. God Bless.

                   GOF <goofyoldfart> ;D
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: H&R Website Frustration
« Reply #19 on: January 20, 2011, 03:05:27 AM »
Brian, It is wonderful to have an "open ear" in the factory.  Thank you.  I hope your superiors appreciate you as much as we do.  Thanks again,

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: H&R Website Frustration
« Reply #20 on: January 28, 2011, 07:27:11 AM »
Here's a pic of the Infinity Youth stock set, appears to be the old style syn with a new style checkered forend.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »