Author Topic: Cleaning mold from rifle cases.  (Read 1091 times)

0 Members and 1 Guest are viewing this topic.

Offline 30calflash

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
Cleaning mold from rifle cases.
« on: January 21, 2011, 07:44:20 AM »
  I dug thru some of my soft cases and found that over the summer some of them have acquired some white mold on them. It happened to cotton, canvas and suede cases. I thought a mild bleach solution may work but unsure. If they became stained slightly that would be okay. Just want to get rid of it. Thanks for any comments. 30cal.
Hold still while I overthink this.

Online Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18267
Re: Cleaning mold from rifle cases.
« Reply #1 on: January 28, 2011, 12:09:57 AM »
the cotton ones should be able to be washed in a washing machine.
blue lives matter

Offline jhm

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3169
Re: Cleaning mold from rifle cases.
« Reply #2 on: January 29, 2011, 05:59:55 AM »
    I would DRY brush the mold off and then use a mild salution of bleach and water to wash the area, let it air dry then have them in a dry well ventalated area.   HTH   Jim

Offline GH1

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 939
  • Gender: Male
Re: Cleaning mold from rifle cases.
« Reply #3 on: February 13, 2011, 12:45:56 AM »
Be sure to use a dust mask when dry brushing any type of mold. It's nasty stuff.
GH1 :)
I owe my life to an organ donor

Offline 30calflash

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 128
Re: Cleaning mold from rifle cases.
« Reply #4 on: February 17, 2011, 03:16:53 AM »
 Thanks for the info. I'll be getting er done this weekend.
Hold still while I overthink this.

Offline eye shot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 665
    • Mike's Obituary
Re: Cleaning mold from rifle cases.
« Reply #5 on: February 17, 2011, 03:48:40 AM »
Vinegar will take mold off. You can add a little baking soda to it and use the mix after it quits foaming.
RIP Mike. Died on July 14th, around 2am, with his family at his side, he went peacefully to be with god.

http://www.sent-trib.com/obituaries/michael-l-schulte