Where can I buy another transfer bar !!

[Kiwi Hunter]

Giday folks , I got a wee problem with a  nef / h&r  superlite 20 inch handi in .243 . I brought this rifle for my son about a month ago secondhand way down under in new zealand . Problem is the transfer bar has slipped out and I can't find it anywhere.I have called the agents in new zealand but no luck with them . Can any one suggest where I might get one thru a reliable internet store that with ship down to new zealand.We havn't even had chance to shoot it at the range yet . Any help would gratefully accepted  Kev

[LaOtto222]

http://www.brownells.com/.aspx/sid=18169/pid=7140/Product/S02043_STRIKER___LIFTER_ASSEMBLY

Other H&R parts for Ultra and SB2 frames

http://www.brownells.com/.aspx/pid=0/sid=676/schematicsdetail/SB2_Handi_Rifle_H_R_Ultra

Will they deliver to me?
 
   
Where do they deliver?
   
P.O.Box Delivery?
   
RFD Address Delivery?
UPS
   
Air/Ground Delivery to the lower 48 states. No ground to Hawaii, Alaska, or Puerto Rico

 
   
No
   
Yes; if given specific directions
FedEx
   
Air/Ground Delivery to the lower 48 states. No ground to Hawaii, Alaska, or Puerto Rico
No
   
Yes; if given specific directions
USPS
   
World-wide
   
Yes
   
Yes; if given specific directions

[quickdtoo]

Brownell's would ship to NZ as long as the order amount is less than $100, but they're out of stock on the T-bar, have been for a while.

http://www.brownells.com/aspx/general/international_sales.aspx

Numrich has a replacement in stock tho, http://www.gunpartscorp.com/catalog/Detail.aspx?pid=1139220A&catid=3626

They do ship international, but apparently charge $25 plus shipping charges, I can order one for you and send it myself for cost plus $13.25 shipping, I've sent reloading stuff to OZ before.

Tim

http://www.gunpartscorp.com/Foreign.aspx

http://ircalc.usps.gov/MailServices.aspx?country=10324&m=13&p=0&o=1&mt=13

http://pe.usps.com/text/Imm/mo_025.htm#ep1737370

[Kiwi Hunter]

Wow  that is great news ! Here I was between a rock and a hard place and you guys have jumped in and saved my bacon . This Internet thingy sure is a handi  thing . Thanks Tim for the offer I will try and deal with Numrich directly first . If I have no luck I will PM you and take you up on your kind offer .Heres the thing the New Zealand agents are happy to sell new handis but not interested in any back up service  . About 7 or so years ago the transfer bar on my bull barrel .243 handi did the same thing and the old New Zealand agents had it fixed and back to me in no time .Just goes to show change is not always a good thing ! Cheers Kev

[quickdtoo]

Ok, let us know how it goes. 

Tim

[mechanic]

Paying that much shipping, I believe I would order a couple extra.....

Ben

[gcrank1]

I wonder if an earlier style hammer would fit & work to make it not need a transfer bar.

[Kiwi Hunter]

The transfer bar feature is one I really like .Hunting in new zealand bush can get very tight, where you often get only one chance at a shot . I like to hunt with a live round  up the spout ,and knowing there is no pressure of a hammer sitting gently against a live primer . I am no expert but just feel safe with this system . I have tried other rifle actions but aways come back to my old favorite handi . Just lately I've been thinking about 30/30 handi and getting it reamed out to 30/30ai after reading on here just how good they are for hunting deer out to 200 yards . Tim will I have to knock out the pins and reassemble the trigger to fit the new tbar or can you just slip the new one in from the top when the hammer is on full cock? I have checked out handi info at the top but just keen to know if there is any short cuts. Cheers Kev
 

[quickdtoo]

Kev,

You'll have to remove all but one of the pins to replace the t-bar, download Perklo's trigger hone info in the FAQs. it has complete, detailed instructions with pics.

Tim