« previous next »
Pages: [1]   Go Down

Author Topic: question on 357max loading.  (Read 608 times)

0 Members and 4 Guests are viewing this topic.

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
question on 357max loading.
« on: January 29, 2011, 01:20:42 PM »
can the max be loaded using the 357 mag dies???
Logged
the nation that forgets it defenders will itself be forgotten

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: question on 357max loading.
« Reply #1 on: January 29, 2011, 01:22:57 PM »
MOST can YES.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: question on 357max loading.
« Reply #2 on: January 29, 2011, 01:23:16 PM »
Most 357mag dies will work, although I don't know positively they all will, biggest problem you'll have is with seating pointed bullets, many seater die plugs are made for blunt bullets and don't match the ogive of pointed bullets.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Turkeyhntr

  • Trade Count: (0)
  • Posts: 1
Re: question on 357max loading.
« Reply #3 on: January 29, 2011, 02:27:56 PM »
The Hornady Series II Custom Grade three die sets are supplied with seating stems for both flat and pointed bullets.
Logged

Offline Jimbo47

  • GBO Supporter
  • Trade Count: (25)
  • Senior Member
  • *****
  • Posts: 1304
  • Gender: Male
Re: question on 357max loading.
« Reply #4 on: January 29, 2011, 03:50:41 PM »
Yep, Hornady three die set is the way I went, and never had a problem! 38-357-357max
Logged
My culled down Handi's are the 45-70, and then I have a few others to keep it company...357 Mag/Max. .45 LC/.454 Casull Carbine, .243 Ultra, and 20 gauge Tracker II.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: question on 357max loading.
« Reply #5 on: January 30, 2011, 05:17:22 AM »
And most (all?) die sets have different seating plugs available, or are often not hard to make or modify with some epoxy to your preferred nose profile.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: question on 357max loading.
« Reply #6 on: January 30, 2011, 03:35:02 PM »
well thats one objection down for reaming, if i dont find another i may have to do it.
Logged
the nation that forgets it defenders will itself be forgotten

Offline watkibe

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 259
Re: question on 357max loading.
« Reply #7 on: January 30, 2011, 04:39:46 PM »
Torpedoman, I did it, and there is no downside ! It's all good.
There: now you have to do it.  ;D
Logged

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: question on 357max loading.
« Reply #8 on: January 31, 2011, 12:11:55 AM »

 Hey Torpedoman Do it you won't be sorry. I did just soon as I could.
 I have a old of Lyman dies for 38/357 They work just fine, I bought them used before
 I every heard of the maxie  Datil
Logged

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: question on 357max loading.
« Reply #9 on: January 31, 2011, 01:02:31 AM »
I have a set of the Lee Deluxe Carbide Dies and they work fine for the Max.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline parson48

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 253
Re: question on 357max loading.
« Reply #10 on: January 31, 2011, 01:48:25 AM »
Question for gcrank1: Sorry to take the thread astray, but you mentioned changing nose profile of seating die with epoxy. Could you elaborate?

I tried to search for info but didn't find any.

Thanks.

Logged

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: question on 357max loading.
« Reply #11 on: January 31, 2011, 03:40:53 AM »
Quote from: parson48 on January 31, 2011, 01:48:25 AM
Question for gcrank1: Sorry to take the thread astray, but you mentioned changing nose profile of seating die with epoxy. Could you elaborate?

I tried to search for info but didn't find any.

Thanks.
+1   I drilled out the seater plug that came with the Lee Carbides but it still shaves just a touch off the lead tip.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: question on 357max loading.
« Reply #12 on: January 31, 2011, 09:44:56 AM »
Drilling the typical flat or round nosed pug to take the longer tapered tip can work, better is to 'profile' it in a lathe to more closely match the ojive of the desired bullet.
Short a lathe (or a friend with one) is to drill that hole well centered to get the tip up and in farther and coat a bullet in a loaded round with a little smear of bullet lube or Vaseline, etc. as a release agent. Get a thickish blob of epoxy in the plug cavity and insert it over the bullet to harden to the profile. This is best done with the plug in the die body and the round in the press so everything stays perfectly in line and squared up. It is ackward to get the epoxy up in there so screw the plug down as far as it will go. Just the weight of the press ram & handle will hold it all in line. Next day you are all set ( ;)); a custom plug for yur bullet of choice. Often it will still work with your other bullet nose shapes too.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: question on 357max loading.
« Reply #13 on: January 31, 2011, 09:56:30 AM »
Thanx grank1 most appreciated.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline parson48

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 253
Re: question on 357max loading.
« Reply #14 on: January 31, 2011, 10:52:03 AM »
Thanks gcrank1.
Logged
Pages: [1]   Go Up
« previous next »