« previous next »
Pages: 1 [2]   Go Down

Author Topic: 9.3x74r handi... uhh make that .375 H&H Flanged handi  (Read 3831 times)

0 Members and 1 Guest are viewing this topic.

Offline jason045

  • Trade Count: (18)
  • Avid Poster
  • **
  • Posts: 234
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #30 on: February 26, 2011, 01:02:38 PM »
Ok, its a done deal.  The 25-06 barrel leaves monday to become a .375.  I called and asked the old man should I have the rebore done myself then send him the barrel for chambering or did he have someone in mind to do the rebore.  I told him the best price I had found was $225 and he said that was too much to just send it to him and he would handle the rest.  Its great to have a gunsmith in the family that does pro bono work and an FFL holder 2 miles away that charges me nada for transfers.  ;D
Logged
You never know when ya got too much gun, but ya dang sure know when ya aint got enough!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43299
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #31 on: February 26, 2011, 01:30:10 PM »
I transposed the chamber pressure figure on the breech force calculation, made the correction in my reply, it's still fine tho, the 270 Win at 65kpsi is 11,277 psi and the 500S&W is 13038 psi in comparison.  ;)  Now all ya have to do is find a reamer!!  :D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43299
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #32 on: February 26, 2011, 02:43:21 PM »
Hmmm, this thread got me to thinking about my 375 Whelen Improved project which is on hold due to having to pay $900 in taxes this year instead of getting a $1500 refund!  :-\ You could just have it chambered to 375 H&H Ackley, and mark it reduced loads only, then if anyone loaded a full pressure round in it, the extra chamber capacity would reduce pressure to well within the Handi's capability, I ran it thru QuickLoad, a 64kpsi load in the larger chamber(10gr water more capacity) produces just 50kpsi pressure and 10335 psi breech thrust. The advantage would be the reamer is available for rent at both reamer rental sources, and Redding dies for $80 plus less expensive brass, just load it to Handi safe pressures, and the straighter chamber may even help reduce breech thrust.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline jason045

  • Trade Count: (18)
  • Avid Poster
  • **
  • Posts: 234
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #33 on: February 26, 2011, 05:04:42 PM »
No problem on the reamer.  It has already been purchased for my dads double rifle project.  Plenty of brass too.  The AI version is on the belted case right, Tim?  I think I just want to stick with the rimmed case.  Seems like rimmed cartridges just belong in a handi.  Thanks for the suggestion though.  P.S.  Sorry Uncle Sam is hitting you so hard this year. >:(
Logged
You never know when ya got too much gun, but ya dang sure know when ya aint got enough!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43299
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #34 on: February 26, 2011, 06:39:37 PM »
Yes, the 375H&H Ackley is just an AI version of the 375H&H, it's also one of the better Ackley chamberings that provides a good improvement over the parent cartridge, in fact, the more I think about it, the more interesting it looks over the 375 Whelen Improved, specially if I can get away with just neck sizing with a collet die, I already have a Hornady 375H&H die set!  ;D

thanks,

Tim

http://www.beartoothbullets.com/tech_notes/archive_tech_notes.htm/43

http://www.midwayusa.com/viewProduct/default.aspx?productNumber=379725
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Troyboy

  • GBO Supporter
  • Trade Count: (41)
  • Senior Member
  • *****
  • Posts: 1220
  • Gender: Male
  • Work more talk less
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #35 on: February 27, 2011, 08:51:20 AM »
Now we are talking. Having a 375 handi is almost as cool as the 45-120.  :D
Logged
.204 .22lr .22wm .25acp .223 5.56 .243 .25-06 6.5x55  .308  .300wbymag  7.5x54  7.62x25 7.62x39  338-06  9x19 .38spl  9x18 .45acp . 45-70 .500s&w 12rfl 12smb 20smb  .45lc 410smb .22hornet .280AI    Ask not what your country can do for you BUT what can YOU do for your country

Offline hex

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #36 on: March 20, 2012, 05:11:55 AM »
I know this tread is a little old, but I am curious how this project turned out. Did the conversion of the 25-06 barrel to handle .375 H&H Flanged go well?


Thanks
Logged
“Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #37 on: March 20, 2012, 07:34:22 AM »
I've got a 375 Winchester just about done, used a takeoff Weatherby Magunum barrel.  Should be quite a thumper I would say.  The cartridge on the right is a 38 special for comparison.  Larry
 

Logged
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #38 on: March 22, 2012, 09:44:10 AM »
Larry,
 
What it the longer bore riding bullet?  It looks very interesting.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #39 on: March 23, 2012, 08:15:41 AM »
Fancy lookin' 38-55 you've got there, Lar.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43299
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #40 on: March 23, 2012, 08:31:11 AM »
A fancy 38-55 that can utilize commonly available jacketed .375" bullets instead of playin with uncommon oversize cast bullets!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #41 on: March 23, 2012, 08:39:22 AM »
OK, close enough to a 38-55, even though a bit shy of being a 'real .38 cal.  ;)
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974

Offline hex

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #42 on: March 23, 2012, 09:04:29 AM »
So no one knows if this was a success or fail? I wonder if its a worthy project to pick up...
Logged
“Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43299
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #43 on: March 23, 2012, 09:46:44 AM »
Dunno why Jason hasn't replied, but it didn't happen, he's working on a custom .458" barrel now tho which I hope he tells us about, I think he's waiting for it to be rebored.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline hex

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #44 on: March 23, 2012, 10:03:40 AM »
Humm... punching a .375 Flanged to a .458 Flanged?! Now there is something to ponder..


Tim, Liked your .338-06. Sharp gun.
Logged
“Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #45 on: March 23, 2012, 11:09:42 AM »
Quote from: hex on March 23, 2012, 09:04:29 AM
So no one knows if this was a success or fail? I wonder if its a worthy project to pick up...

hex,
 
all Handi projects are worth the work, success or failure.  I would think that Larry's approach is more economical than a rebore.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline hex

  • Trade Count: (0)
  • Member
  • *
  • Posts: 42
  • Gender: Male
Re: 9.3x74r handi... uhh make that .375 H&H Flanged handi
« Reply #46 on: March 23, 2012, 12:20:17 PM »
Larry, If you don't mind my asking, what is your price range on completion of the project?
Logged
“Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla
Pages: 1 [2]   Go Up
« previous next »